In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.
신 기후변화협약에 따라 전 세계적으로 온실가스를 저감하는 기술개발이 활발하게 이뤄지고 있으며, 발전·송배전 분야에서 에너지효율향상에 대한 연구가 진행되고 있다. 에너지저장장치를 이용해 잉여전기를 저장하고 전기를 공급하는 운영방식에 대한 경제성 분석, 지역단위 열 병합 발전소에서 주파수조정예비력으로 에너지저장장치를 활용하는 것이 가장 수익이 높은 운영방안으로 보고되었다. 이에 본연구에서는 체코의 열병합발전소를 대상으로 에너지저장장치 설치를 위한 경제성 분석을 실시하였다. 배터리에너지저장장치의 경제성 평가에 있어 가장 중요한 요소는 수명으로 일반적으로 1일 1회 충·방전을 기준으로 보증수명은 10~15년으로 알려져 있다. 시뮬레이션을 위해 배터리와 PCS의 비율은 1:1, 1:2로 설계하였다. 일반적으로 Primary 주파수조절용의 경우 1:4로 설계를 하지만, 열병합발전소의 특성을 고려하여 최대 1:2의 비율로 설정하였으며, 각각의 비율에 맞게 용량을 1MW~10MW, 2MWh~20MWh로 시뮬레이션을 실시하여 연간 사이클 횟수를 기준으로 수명을 평가하였다. 체코의 열병합 발전소에 배터리에너지저장장치를 설치하는 사업은 현지 인프라와 전력시장을 고려할 경우 투자 회수 기간은 3MW/3MWh가 5MW/5MWh보다 유리하다. 보조금 없이 예상 구매 가격을 고려한 간단한 투자회수기간에서 약 3년, 약 5년으로 산정되었으며, 구입비용이 전체 평생 동안 비용의 중요한 부분이기 때문에 구매가격을 50 % 낮추면 약 절반 정도의 회수 기간이 단축 될 수 있지만, 3MWh와 5MWh의 규모에 경제를 통해 수익성 확보는 불가능하다. 전력시장의 가격이 50% 하락하면 투자 회수기간은 P1 모드에서는 3년, P2 및 P3 모드에서는 2년 더 길어진다. 배터리에너지저장시스템과 발전기의 결합으로 인한 절감액의 변화에 대한 민감도 분석은 전제 범위 내에서 회수 기간에 큰 영향을 미치지 않으며, 보조금 15%를 받는 기준에서 3MW 시스템의 총 비용은 66,923,000 CZK이며, 편익은 모드에 따라 244,210,000 ~ 294,795,000 CZK이며, 비용회수기간은 3~4년이다. 동일한 기준에서 5MW 시스템의 경우 총 비용은 101,320,000 CZK이며, 편익은 모드에 따라 253,010 ~ 281,411,000 CZK로 나타나며, 비용회수기간은 5~6년이다. 체코에서 배터리에너지저장시스템은 MWh당 1년에서 1.2년의 투자회수기간이 발생하는 것을 알 수 있다.
본 논문에서는 폐수슬러지에서 제조된 재활용 이산화티탄($TiO_2$)을 혼입한 시멘트 모르타르의 NOx 저감 성능에 대해 고찰하였다. 일반적으로, 이산화티탄은 클러스터 형태로 입자가 붙어 있어, 시멘트의 응결과 경화 전에 타설체 하면에 침강하는 특징이 있다. 그 결과로 타설체의 상면과 하면에는 이산화티탄의 분포도가 서로 상당한 차이를 나타내고, 광촉매 효과도 하면에서 우수하게 나타난다. 건물이나 주택과 같은 건축구조물에서는 이를 해결하기 위해, 이산화티탄을 혼입한 프리캐스트 제품을 미리 제작 후, 조립 시에는 타설 시 상면과 하면을 뒤집어 거치하여 상대적으로 높은 이산화티탄 분포면을 대기에 노출시키는 방식을 사용한다. 그러나 콘크리트 도로포장과 같은 현장 타설의 경우, 상면과 하면을 뒤집어 거치할 수 없기 때문에 이산화티탄의 분산성은 중요하다. 이를 개선시키기 위한 본 논문의 결과로 실리카퓸, 고성능감수제, 증점제, 고로슬래그 등 전형적인 시멘트성 재료의 분산에 기여하는 재료는 이산화티탄 클러스터의 분산효과에 미미한 영향을 주었다. 급결제, 발포제, 작은 크기의 잔골재의 조합이 이산화티탄 클러스터의 분산성을 개선하였다. 분산성 개선에도 불구하고, 타설체 상면과 하면의 NOx 제거효율은 하면에 큰 효율을 지속적으로 나타내었고, 이는 표면에 분포하는 공극량에 따라 달라지는 것을 디지털 표면 이미지 분석을 통하여 확인하였다. 많은 공극분포를 갖는 표면은 상대적으로 매끄러운 표면에 비해 NO가스 흡착을 기본적으로 높이게 되고, 이를 기준으로 상대적인 NOx 제거효율이 높아지는 것으로 사료된다.
Purpose: The study aimed to evaluate working environment for dental technician by measuring dust level, ventilation conditions and the use of personal protective equipment and to provide basic information required to improve working environment and develop health education programs for dental technician. Methods: A total of 240 dental technician who are registered with the Daegu Association of Dental technician and working at 34 dental laboratories participated in the study. And the dust level was measured at 21 different spots in 16 dental laboratories out of 34. Results: Of 34 dental laboratories, 31 (91.2%) were equipped with a ventilator, but the remaining 3 (8.8%) did not have a ventilator. By the number of ventilator, 1 to 3 ventilators were found in 22 dental laboratories (71.0%), 4 to 6 ventilators were in 7 laboratories (22.5%) and more than 7 ventilators in 2 laboratories(6.5%). According to the frequence of changing filters in dust collector, 20 dental laboratories (58.9%) changed filters every four weeks, 10 laboratories (29.4%) changed them every six weeks and 4 laboratories (11.7%) changed them every eight weeks. Of total respondents, 114 (61.3%) said they wore a mask all the time while working, 56 (29.6%) said they frequently wore a mask, 19 (10.1%) said they did not wear a mask. As for the type of masks, 159 (84.1%) used a disposable mask, 25 (13.2%) used a cotton mask and 5 (2.7%) used an anti-dust mask. For dust sat on their outfits while working, 102 (54.0%) shook their uniforms inside workplace to keep dust off the uniforms, 64 (33.9%) did not anything until they wash their uniforms and 23 (12.1%) shook their uniforms outside workplace to keep dust off the uniforms. Of total respondents, 182 (96.3%) had a particle in their eyes while carrying out grinding work. Based on the measurement of floating dust at workplace, 3 dental laboratories showed dust concentration exceeding the minimum level of 10 mg/$m^3$ allowed under the permit for environment. Of those, 1 laboratory had the dust concentration that was more than 1.5 times higher than the minimum level. Dust concentration was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Dust comprised of nickel (more than 70%), chrome (9%) and others. The mean chrome concentration was more than twice higher than the minimum permissible level of 0.5 mg/$m^3$. There were two laboratories that showed chrome concentration exceeding the level of 0.4 mg/$m^3$. Like dust concentration, chrome level was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. There were six laboratories that had nickel concentration exceeding the minimum permissible level of 1 mg/$m^3$. Of those, one laboratory had nickel concentration that was more than three times higher than the minimum permissible level. Nickel concentration was also higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Conclusion: It is not likely that heavy metal concentrations found in the study constitute respiratory dust. It is however necessary for health of dental technician to apply the Industrial Safety and Healthy Law to dental laboratories and make recommendations for the use of personal protective equipment, installation of a proper number of ventilators, more frequent change of filters in dust collector and improved ventilation for polishing work. At the same time, dental technician need education on how to use personal protective equipment and how to efficiently remove dust from their uniforms.
최근 최첨단 핵의학 영상기술의 발달로 임상적 이용이 증가되어 방사선 선원을 취급하는 핵의학과 작업종사자의 몸통 부위와 손 부위에 노출되는 외부 피폭선량을 평가하고 검사 빈도가 높은 전신 뼈검사(Whole body Bone Scan)와 양전자 단층촬영(PET/CT)시 방사선 선원($^{99m}Tc$-HDP, $^{18}F$-FDG)의 취급 및 검사에 따른 손 부위 피폭선량을 측정하고자 한다. 방사선 선원 취급 시 방호구 착용 및 손 부위를 측정 할 수 있는 선량계 보유 여부를 알아보기 위해 4개의 의료기관에 설문 하였다. 방사선 선원을 직접 분주하고 주사하는 숙련된 작업종사자의 가슴과 약지손가락에 열형광 선량계을 착용하여 누적된 외부 방사선 선량을 측정하고 손 부위의 외부 방사선량 측정을 위해 구간별 일일 방사선 선원으로부터 노출되는 선량과 시간을 포켓도시메터를 이용하여 각각 측정 하였다. 인천광역시 4개 의료기관을 대상으로 조사한 결과 손 부위의 방사선 피폭선량 측정기를 구비한 의료기관은 1곳을 제외한 3곳은 구비하지 않았고 차폐기구 사용은 방사선 선원으로부터 몸통을 보호하기 위해 차폐기구를 사용한 곳이 대부분 이었고, 일부 의료기관에서는 사용하지 않는 곳도 있었다. 방사선 선원을 직접 분배하고 투여하는 핵의학과 작업종사자의 손 부위 외부피폭 선량은 몸통부위보다 약 2배 이상 많은 선량을 받았고, 검사 빈도가 높은 전신 뼈 검사와 양전자 단층촬영 시 각 구간별 외부피폭 선량을 보면 방사성의약품 합성 및 분배용기 장착, 분배, 투여, 이동 순으로 각각 나타났다. 또한 방사선 선원 투여시 방호구 착용 전/후 손 부위의 피폭선량을 측정한 결과 통계적 유의한 차이가 있었다. 연구결과 작업종사자의 유효선량에는 못 미치지만 비 작업종사자보다 비교적 높은 선량을 받고 있어 방사선 선원을 근거리에서 노출되는 작업종사자는 안전관리 규정을 준수하고 손 부위 선량계(Ring TLD)를 착용하여 방사선 선원으로부터 피폭 저감을 위한 활동을 하여야 한다.
과거의 토석류 재해는 도시로부터 멀리 떨어진 산지지형에서 주로 발생하여 다른 자연재해 보다 비교적 피해가 적은 재해로 저평가 되었다. 하지만 도시화가 진행됨에 따라 도심속 산지지형에 많은 주거지 및 주요 시설물 등이 건설되면서 많은 환경적 변화와 기후변화에 따른 강우량의 증가로 토사재해의 발생 빈도가 꾸준히 증가 하고 있어 토석류에 대한 위험 리스크가 고조되고 있다. 특히 급경사지로 지정된 지역에서 토석류 범람 특성 및 저감대책에 관한 연구는 아직 미비하다. 따라서 우리나라 환경에 적합한 독자적인 방재 기술을 확보하기 위한 연구와 여러 방재 정보의 업데이트 및 개량이 요구되며 우리나라 지형 특성을 고려할 수 있는 독자적인 기술이 필요하다. 본 연구에서는 우리나라 급경사지로 지정된 지역을 대상으로 방재성능목표에 따른 토사 유출량을 산정하고 그에 따른 독자적인 모델을 개발하여 토석류 영향평가와 피해저감에 탁월한 사방댐의 기능 평가를 목적으로 한다. 사방댐 평가를 위해 개발한 2차원 토석류 모델의 신뢰성 확보를 위해 수리모형실험과의 비교 검증 결과 잘 일치하는 것으로 나타났으며 이 결과로부터 모델의 신뢰성을 확인하였다. 또한, 급경사지 주변의 지역적 특징을 고려하기 위해 평면 2차원 토석류 모델을 구축하여 직접 피해지역에 도달하는 토석류의 흐름 특성을 분석하였고, 피해저감을 위해 설치한 사방댐의 제원(높이) 및 설치장소에 따라 토석류가 하류로 전달되는 흐름 특성을 분석하였다. 특히 사방댐 설치장소가 토석류의 흐름이 발생하는 약 20° 이상의 지역에서는 사방댐의 기능이 현저히 떨어지는 것을 확인하였다.
뇌신경계 인터벤션 시술은 장시간의 시술로 인해 피부의 수포, 탈모, 홍반 등의 방사선 피폭으로 인한 위해가 빈번히 보고되고 있다. 인체공학적으로 제작된 Bismuth (원자번호 83;Bi) 차폐체를 뇌혈관계 인터벤션 시술에 적용함으로써 의료방사선 피폭으로부터 두피 및 수정체의 방사선 피폭을 최소화하고자 하였다. 측정 부위는 4부위로 후두부(9 points), 양쪽 측두부(12 points), 양쪽 수정체부(6 points), 코 끝부(6 points)이며, 측정 소자는 광자극 형광 선량계(Optically Stimulated Luminescence Dosimeter: OSLD)를 각 지점(points)에 측정기를 부착 후 자체 제작된 Bismuth차폐 기구를 사용 전(A그룹)과 후(B그룹)를 측정한 후 피부표면선량(entrance surface dose)을 비교 분석하였다. A 그룹(Bismuth unshield)과 B 그룹(Bismuth shield)의 피부선량 평균은 A 그룹은 92.44 mGy였고, B 그룹은 67.55 mGy로 측정되었다. A 그룹에 비해 B 그룹에서 평균 26.92% 감소되었다. 후두부의 피부선량 평균은 A 그룹(9 point)은 146.08 mGy, B 그룹(9 point)은 103.23 mGy로 측정되었고 A 그룹에 비해 B 그룹에서 평균 29.32 % 감소하였다. 측두부의 피부선량 평균은 A 그룹(6 point)은 101.90 mGy, B 그룹(6 point)은 72.69 mGy로 측정되었고 A 그룹에 비해 B 그룹에서 평균 28.67% 감소하였다. 수정체부의 피부선량 평균은 A 그룹(3 point)은 27.51 mGy, B 그룹(3 point)은 21.39 mGy로 측정되었고 A 그룹에 비해 B 그룹에서 평균 22.26% 감소하였다. Bismuth 차폐체의 사용은 뇌혈관 중재적 시술 후 나타날 수 있는 일시적 탈모 및 기타 확률적 영향에 따른 방사선 장해를 감소시킬 수 있는 대안이 될 것으로 사료된다.
공용화기사격장 내 중금속 오염물은 대부분 탄두원형으로 존재하거나 입자로 존재하는 금속조각편이며 이들 미세한 금속입자들은 오랜 기간 풍화되어 표면이 산화물 또는 탄산화물로 존재할 가능성이 매우 높다. 특히 사격장 토양에서 대표적 오염물질인 납은 연성이 높아 무르고 잘 늘어나므로 더 미세입자로 존재한다. 따라서 물리적 세척 실험으로 입도분석, 입경별 중금속농도, 금속물질 성분분석, 비중, 자력, 부상선별의 적용성 평가를 실시하였다. 금속파편의 경우 FESEM분석과 무게측정결과 납은 무른 특성에 따라 얇게 조각나고 편모양의 구조로 비슷한 면적의 구형 토양보다 무게가 더 적게 나가는 것을 확인하였으며 비중선별 적용성이 높은 것을 확인할 수 있었다. 이 결과를 적용하여 하이드로사이클론을 이용한 정화효율평가 결과 1회 71%, 2회 80%, 3회 91%의 누적 정화효율을 보였다. 이에 비해 자력선별은 17%의 낮은 효율을 보였고 부상선별은 입경 0.5 mm 미만으로 선별한 대상토는(-35 mesh) 39%로 비교적 높은 효율을 보였으나 입경 2 mm 미만으로 선별한 대상토의(-10 mesh) 효율은 16%에 불과하였다. 토양세척의 대상 처리입경은 2 mm ~ 0.075 mm로 입도구분을 추가로 하여 실규모 장치에 적용하여야 하며 이는 설치비용과 공정이 추가로 구성됨에 따른 관리가 필요할 것으로 분석되었다. 결과적으로 공용화기사 격장 오염의 토양정화는 탄두 원형을 유지한 탄두는 5.56 mm 이상으로 자갈입경보다 크므로 고비중을 이용한 비중선별을 실시하고, 금속파편으로 존재하는 오염물질은 얇게 조각나고 편모양의 구조로 같은 입경의 토양보다 무게가 더 적음에 따라 토양세척의 하이드로사이클론을 이용하여 분리하여 처리할 수 있음을 확인할 수 있었다.
As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm3 to 4.14 g/cm3, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm3, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm3 with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.
도시공원은 시민들의 건강, 삶의 질, 그리고 커뮤니티 형성을 지원하는 사회적 기반시설이다. 조성된 후 20년 이상이 지난 도시공원 비중이 커지고 있는 가운데, 노후 도시공원의 물리적 공간환경 개선과 기능 제고를 위한 정비사업 추진 필요성이 높아지고 있다. 관 주도의 노후 도시공원 정비는 재원 확보와 공원 매력 증진 측면에서 한계가 있기 때문에 민·관 협력을 통한 추진이 필요하다. 우리나라에 앞서 노후 도시공원 문제를 겪은 일본은 2017년 「도시공원법」 개정을 통해 공모설치관리제도(Park-PFI)를 도입하여 다수의 공원 정비사업을 성공적으로 추진 중이다. 이에 본 연구는 민·관 협력을 통해 국내 노후 도시공원 서비스의 질을 개선하고, 지속적으로 관리·운영하기 위한 대안으로서 일본 공모설치관리제도(Park-PFI)의 특성을 다각적으로 검토·분석하고, 이를 국내 노후 도시공원에 시범 적용한 후, Park-PFI 적용을 통한 노후 도시공원 재정비사업의 타당성을 분석하고자 하였다. 주요 연구결과는 다음과 같다. 첫째, 일본의 공모설치관리제도(Park-PFI)는 노후 도시공원의 서비스 질 향상과 기능 다양화를 위한 민·관 협력 수단으로 국내 여건에 맞춰 도입하는 것에 대한 논의를 시작할 필요가 있겠다. Park-PFI의 국내 도입을 위해서는 민간 자본 및 수익시설 설치에 따른 도시공원의 공공성 저하와 장소성 훼손, 공원녹지법 및 공유재산법 등 관련 규제 개선 등에 관한 사회적 논의와 후속 연구가 필요하겠다. 둘째, 노후 도시공원의 정비 필요도가 높고, 사업을 추진하기에 적합한 입지라는 전제하에 Park-PFI 사업은 시민, 지자체, 민간 사업자 모두의 편익을 증진시킬 수 있는 정책 대안이라고 판단된다. 인천광역시 부평구에 위치한 노후 도시공원인 세영공원에 Park-PFI 사업을 시범 적용한 결과, 수익성지수(PI), 순현재가치(FNPV), 내부수익률(FIRR) 등의 측면에서 수익성이 있는 것으로 분석되어 민간 부문의 사업 참여가 가능할 것으로 판단된다. 지자체 차원에서도 민간 자본을 활용하여 노후 도시공원의 물리적 공간환경을 정비하는 것은 물론 민간 사업자의 시설 사용료와 수익의 일부(연매출의 0.5%)를 환원받음으로써 발생하는 재원을 활용하여 해당 도시공원의 유지관리 예산을 확보할 수 있는 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.