• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.306-320
• /
• 2013

This study compares and analyses the existing safety inspection systems in Korea and Japan to establish and propose future safety inspection systems for multiple-unit dwellings in Korea. The results of the study are summarized below. First, the state of Korea's current safety inspection systems and policies for multiple-unit dwellings are compared with the systems and policies in Japan. Second, the differences between the safety inspection systems of the two nations are presented, and the issues in Korea are addressed. Third, methods to establish future safety inspection systems for multiple-unit dwellings based on the systems in Japan are proposed for application in Korea.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.772-777
• /
• 2009

The geometric distortion of image is one of the most important parameters that take effect on the accuracy of optical inspection systems. We propose a new correction method of the image distortion to increase the accuracy of PCB inspection systems. The model-free method is applied to correct the randomly distorted image that cannot be represented by mathematical model. To reduce the correction time of inspection system, we newly propose a grid reduction algorithm that minimize the number of grids by the quad-tree approach. We apply the proposed method to a PCB inspection system, and verify its usefulness through experiments using actual inspection images.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.25-40
• /
• 2016

The Systems Engineering (SE) approach is characterized by the application of a structured engineering methodology for the design of a complex system or component. In this study, the SE methodology is used to design a nondestructive inspection system for Bottom Mounted Instrumentation (BMI) nozzles. We developed a system that enables nondestructive inspection of BMI nozzles during regular refueling outage without removing the reactor internals. A special ultrasonic (UT) probe is introduced to scan and detect cracks within the weld region of the nozzle. A 3D model of the inspection structure system was developed along with the reactor pressure vessel (RPV) and internals which permits a virtual 3D simulation of the operation to check the design concept and effectiveness of the system and to provide a good visualization of the system. This approach allows for a virtual walk through to verify the proposed BMI nozzle inspection system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.167-174
• /
• 1995

The Dynamic programming method are developed for determining where to assign the inspection efforts in serial multi-stage production systems. The objective function is formulated to minimize the inspection and repairing costs. One of the major assumptions in this systems is that every assigned inspection stations should inspect the only items produced in manufacturing stages after the previous inspction station. The inspection stations can be assigned at every possible inspection stage after the manufacturing stages. Two type error is considered and screening inspection policy is assumed in this system and the defective items detected in tile inspection stations will be repaired or scraped by the defective types.

• Industrial Engineering and Management Systems
• /
• v.16 no.1
• /
• pp.1-21
• /
• 2017

This paper discusses a reverse supply chain (RSC) which consists of the process flows from procurement of used products collected from a market, through remanufacturing products from the used products, to sales of the products in a market. In general, it is conceivable for the RSC to face the uncertainty in quality of used products collected from a market. Inspection is one of efficient methods to deal with the problem regarding quality of used products. However, there is a trade-off between inspection cost and inspection accuracy. This paper focuses on the following five types of inspection: (1) 100% inspection, (2) sampling inspection, (3) sampling inspection with screening of rejected lots, (4) sampling inspection with screening of acceptable lots, and (5) no inspection, and determines the optimal operation consisting of the optimal number of procured used products and the optimal inspection policy. Numerical analysis clarifies not only how changes of conditions of the RSC affect the manufacturer's optimal operation but also features of each inspection type. In addition, from the results of numerical analysis, this paper shows the usability to add the proposed inspection in this paper, the sampling inspection with screening of acceptable lots, to choices of inspection type.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.51-63
• /
• 2005

In relation with inspection systems of small fishing vessels, Government is drawing up revision of the law about ships safety act(Article 3) on the basis of supporting safe fishing activities to expand the application range of ships safety act for vessels under 2 tons(small fishing vessels) that are exempted from inspection systems. There are two opinions about inspection of small fishing vessels. Government's opinion is that inspection of small fishing vessels must be enforced to confirm small fishing vessels' safety but fishermen's opinion is that inspection systems keep on existing law because inspection systems spends a lot of time and money to the poor and the old. The alternatives for countered opinions is that the poor fishermen's vessels' for living or small vessels' inspection must be operated by themselves in principle and minimizing the limitation through policies is recommended. In addition, Government needs to develop various programs for inspection systems of small fishing vessels like the main fisheries countries. Particularly, in case of operating inspection systems of small fishing vessels, Government needs to consider some solutions for example supporting inspection fee, minimum inspection for confirming vessels' safety, inspecting when a vessel is building, expanding an inspection period.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.171-171
• /
• 2000

We have developed m innovative surface inspection system for automated quality control for steel products in POSCO. We had ever installed the various kinds of surface inspection systems, such as a linear CCD and a laser typed surface inspection systems at cold rolled strips production lines. But, these systems cannot fulfill the sufficient detection and classification rate, and real time processing performance. In order to increase detection and classification rate, we have used the Dark, Bright and Transition Field illumination and area type CCD camera, and fur the real time image processing, parallel computing has been used. In this paper, we introduced the automatic surface inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms and its performance obtained at the production line.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.146-148
• /
• 2002

An automatic inspection vision systems whose development was the industry applications motor rear side member. This system are connected to the 9 ea camera fur the process inspection the bolt, nuts, units in the rear side member product. This automatic inspection vision systems can perform inspection of not attached the bolt, nuts, units, etc fast and accuracy in react time fashion. And then perform very sophisticated inspection which human workers can not perform.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2049-2051
• /
• 2002

X-ray inspection of tires is now feasible and commercially available. The enabling technologies are economical yet powerful computing systems and high-resolution, high-dynamic range X-ray imaging systems customized for tire inspection. The key advantages of reduced inspection labor, highly consistent inspection and yield improvement are now realizable.

• Information and Communications Magazine
• /
• v.24 no.11
• /
• pp.25-36
• /
• 2007

Deep packet inspection is widely recognized as a powerful way which is used for intrusion detection systems for inspecting, deterring and deflecting malicious attacks over the network. Fundamentally, almost intrusion detection systems have the ability to search through packets and identify contents that match with known attach. In this paper we survey the deep packet inspection implementations techniques, research challenges and algorithm. Finally, we provide a comparison between the different applied system.