• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.1-9
• /
• 2020

Using kerosene and liquid oxygen, 1.5-tonf class liquid-liquid pintle injector with rectangular two-row orifice was designed and manufactured. The combustion test of the pintle injector was carried out to verify the combustion performance and combustion stability under a supercritical condition which is the actual operation condition of the liquid rocket engine. The combustion test result showed that the pintle tip was damaged by the high temperature combustion gas in the high-mixed ratio recirculation zone of the combustion chamber. To solve this problem, the insert nozzle was installed in the pintle injector to increase cooling performance at the pintle tip. As a result of the hot firing test, installation of the insert nozzle, AR and BF had a great effect on pintle tip cooling performance.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.242-247
• /
• 1998

The conventional closed-die forging processes had been applied to forging of the spur gears. But this type process requires high pressure. The commercial finite element analysis code ANSYS for the stress and elastic deformation of non-axisymmetric die was adopted in this study. In the non-axisymmetric die such as gear forging, maximum stresses were imposed on the tip of the gear tooth. When the stress exceeds yield strength of insert die, many approaches were attemped to prevent the die failure. Good shaped products are forged successfully. This type process could by used as an advanced technique to replace conventional hobbing process of gear.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.740-744
• /
• 2002

This paper describes the design and development of drills with deburring inserts. The drills can be used to drill holes and deburr the edges of the drilled holes simultaneously. The drills incorporate deburring inserts within the shank. The insert consists of a fixing base, a cantilever spring and a cutting tip. The stiffness of the cantilever spring and the details of the cutting tip play a central role for the successful deburring performance. The deburring performance is also governed by the conditions of the drilling burr best described by the burr control chart suggested by Dornfeld. With careful burr control, successful deburring is obtained by the drills with deburring inserts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2430-2435
• /
• 2015

In order to achieve high flexibility in manufacture, analysis of chip's shape is one of the most important problems. This paper describes the change of machining characteristics in workpiece materials depending on turning clearance angle. The experiments start from choosing three workpiece materials that are SM45C(machine structural carbon steel), STS303(stainless steel), SCM415 (chrome-molybdenum steel). Then, the experiments show specifically how features of selected materials changed when they were processed with diverse machining depths and with feed rate starting from fixed rotational speed. Especially, the experiments were also analyzed in chip's shape and wear of insert tip. In conclusion, these experiments show that chip's shape was changed by quality of the materials, depth of cut, and conveying speed. When machining feedrate and machining depth were 0.10mm/rev and 0.3mm respectively, workpiece materials showed the best shapes, not categorizing quality of the materials and machining characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1157-1163
• /
• 2009

In order to improve in quality and productivity using the CNC machine tools, it has been endeavored to elevate production process by adding supplementary axes(2 axes) to 2,3 axial CNC machine tools. It is because the movement between the progress of work in processed goods is remarkably decreased more than that of general CNC machine tools that productivity improvement with precision maintenance can be improved. VBScript in CAD/CAM is applied to utilize CNC machine tools added supplementary axes so that Multi-axial &Multi-process manufacturin g program can be conveniently drawn up. However, there is generally much skilful work and operation by the manual program of CAD(2.5D) and CNC machine tools in the filed. As a result of conducting an experiment by COM-filing VBScript at the spot of Insert Tip for milling Face Cutter in CAD/CAM Software(2.5D), it was not only timesaving to draw up program but also more convenient than complicated Multi CAD/CAM Software to approach and possible to program various products instantaneously.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.258-263
• /
• 2005

Statement of problem. Implant screw loosening has been remained a problem in implant prosthodontics. The time needed to insert screw driver into abutment screw head should be shortened for the purpose of decreasing the chair time. Purpose. The purpose of this study was to investigate the effects of the design of abutment screw driver on the amount of time for insertion of screw driver into abutment screw head. Material and methods. Hexagonal and rectangular types of abutment screw drivers were used. The original abutment screw drivers were modified by grinding acute angle of the screw driver tip (modified drivers). Group 1 : hexagonal type abutment screw and original driver Group 2 : hexagonal type abutment screw and modified driver Group 3 : rectangular type abutment screw and original driver Group 4 : rectangular type abutment screw and modified driver UCLA lab analogues were located in acrylic resin block. The angulations of them were 0 and 20 degrees. The times needed for insertion were measured. Group 1 and 3 were used as controls. Results. 1. Group 2 showed shorter insertion time than group 1, regardless of implant angulations (p<.05). 2. Group 4 showed shorter insertion time than group 3, regardless of implant angulations (p<.05). Conclusion. Modified abutment screw drivers required less amount of time to insert screw driver into abutment screw head. Modification of abutment screw driver was beneficial.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.3
• /
• pp.322-324
• /
• 2016

To introduce a new device for catheter placement of an external ventricular drain (EVD) of cerebrospinal fluid (CSF). This device was composed of three portions, T-shaped main body, rectangular pillar having a central hole to insert a catheter and an arm pointing the tragus. The main body has a role to direct a ventricular catheter toward the right or left inner canthus and has a shallow longitudinal opening to connect the rectangular pillar. The arm pointing the tragus is controlled by back and forth movement and turn of the pillar attached to the main body. Between April 2012 and December 2014, 57 emergency EVDs were performed in 52 patients using this device in the operating room. Catheter tip located in the frontal horn in 52 (91.2%), 3rd ventricle in 2 (3.5%) and in the wall of the frontal horn of the lateral ventricle in 3 EVDs (5.2%). Small hemorrhage along to catheter tract occurred in 1 EVD. CSF was well drained through the all EVD catheters. The accuracy of the catheter position and direction using this device were 91% and 100%, respectively. This device for EVD guides to provide an accurate position of catheter tip safely and easily.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2003.11a
• /
• pp.51-56
• /
• 2003

The trained examiner can gain considerable information from visual inspections of the elbow joint, Because much of the joint is subcutaneous, any appreciable alteration in the skeletal anatomy often is detectable. Gross soft tissue swelling or muscle atrophy is also early observed. Inspection and palpation of the medial and lateral epicondyles and the tip of the otecranon from an equilateral triangle with the elbow is flexed. Normally, the arc of flexion extension, although variable, ranges from about O to 140 degrees plus or minus 10 degrees. The posterolateral rotatory instability(PLRI) of the elbow is most common pattern of elbow instability. The lateral collateral ligament complex also includes a narrow but stout band of ligamentous tissue blending with the distal and proterior fibers of the capsule to insert distally on the crista supinatoris of the ulna. This is the lateral ulnar collateral ligament(LUCL). A clinical elbow pivot shift test confirms the PLRI. There are also two active apprehension signs.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.11 no.1
• /
• pp.31-37
• /
• 1991

Acoustic emission(AE) signals detected during metal cutting were applied as the experimental test to sensing tool wear and chipping on the NC vertical milling machine. The in-process detection of cutting tool wear including chipping, cracking and fracture has been investigated by means of AE in spite of vibration or noise through intermittent metal cutting, then the following results were obtained 1) When the tool wear is increased suddenly, or the amplitude of AE signals changes largely, it indicates chipping or breaking of the insert tip. 2) It was confirmed that AE signal is highly sensitive to the cutting speed and tool wear. 3) At the early period of cutting, the wear were large and RMS value increased highly by the influence of minute chipping and cracking, etc. Therefore, the above situations should be considered for the time when the tool would be changed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.1
• /
• pp.80-86
• /
• 2011

This study compared and analyzed manual tapping and automatic tapping regarding tapping process characteristics of titanium hard-to-cut-material. Tapping process characteristics of titanium hard-to-cut-material are evaluated as the quality of a screw, wear of a tap, economic analysis, and cycle time etc. The type of screw threads after manual tapping is formed as an irregular type of screw threads, and perfect screw threads are created after automatic tapping. In addition, the chip type after manual tapping process is formed as the discontinuous chip due to work hardening, and the powder type of chip after automatic tapping process is created. In terms of cycle time, an automatic tapping process is shortened by 70% compared to manual tapping process. Insert tip wear of an automatic tapping shown in the process of 5-hole tapping is not found, but hand tap wear for finish cutting is most severe.