• Parasites, Hosts and Diseases
• /
• v.49 no.4
• /
• pp.365-371
• /
• 2011

In Nigeria, malaria causes up to 11% of maternal mortality. Our main aim was to find out the most common mosquito control measures employed by the pregnant women in Lagos and their effects on malaria infection. The study was carried out over a period of 6 months during which trained interviewers administered questionnaires to 400 pregnant women. The prevalence of malaria was 8.4%. There was no significant association between the prevalence of malaria and age, level of education, or occupation of the participants. Pregnant women in the age range 26-30 had the mean parasite density ($409.9{\pm}196.80$). Insecticide spray (32.8%), mosquito coil (27.5%), and insecticide-treated nets (ITN) (15.5%) were the major mosquito control measures employed by the participants while the prevalence of infection among them were 2.3%, 6.2%, and 3.2%, respectively (P<0.05). Only 18.3% of the women had taken more than one dose of intermittent preventive treatment (IPT), while another 11.8% had taken a single dose. The infection rate among them was 4.1% and 6.4%, respectively. Malaria prevalence was highest among those who had not received any dose of IPT (10%). This study showed that the use of ITN and IPT among the pregnant women were still unacceptably low. It also showed that the use of insecticide spray which was the most common malaria control measure adopted by the participants was effective despite the fact that it is not a National Malaria Control Policy. We recommend that a sustained integrated mosquito man-agement and public education should be strengthened in Nigeria.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.8-14
• /
• 2018

Recently, serious problems occurred such as insecticide eggs, sanitary pads with carcinogens, radon(Rn) emitting beds in domestic. It had not been establishing the inspection system to evaluate safety and human harmfulness before occurring real accidents. This research was conducted to test preliminary experimental inspection for consideration of safety insensibility. The influence of corrosion of metals and plants was studied through aerosol type spraying of agricultural pesticide products coming into the market. These products contain primary three insecticide ingredients(Flufenoxuron, Etoxazole, Fipronil) in recent accidents. Visual examination, SEM-EDS and optical microscope were used for the analysis for corrosion effect. Results show that a lot of ingredients contain in the crop protection products, and various type of corrosion exist in the surface of metals and plants. Therefore, it is necessary to provide health warning and accurate range of use for crop protection products containing insecticide ingredients.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.293-299
• /
• 2014

Objectives: The main objective of this study is to investigate domestic usage amount of insecticide for vegetable cultivation to provide fundamental data for establishing job-exposure matrix(JEM) related to farmers treating agricultural insecticide. Materials and Methods: The survey on domestic usage amount of insecticide for vegetable cultivation was conducted by two research methods. The first method is to utilize agricultural pesticides published annually from Korea Crop Protection Association(KCPA). The second method is to apply cultivation area of vegetable announced officially from Statistics Korea(SK). An estimation of domestic usage amount of insecticide for vegetable cultivation through the second method was done by multiplying total cultivation area of vegetable($m^2$) with optimal spray amount of insecticide for vegetable cultivation per unit cultivation area of vegetable ($kg/m^2$). Results: As a result of analysis of public data related to insecticide for vegetable cultivation, it was found that its domestic usage amount has decreased gradually from the first sale year(1969) to current year(2012). There is, however, a considerable difference of annual usage trend of insecticide for vegetable cultivation between shipments and estimation. The annual usage trends of insecticide for vegetable cultivation based on regional classification were different from those based on total aspect. Conclusions: The region which used insecticide for vegetable cultivation the most in Korea was Jeolla-do, followed by Gyeonsang-do, Chungcheong-do, Seoul/Gyeonggi-do, Gangwon-do and Jeju-do. Substantially, mean ratio of usage amounts of insecticide based on shipments and those based on estimation by cultivation area was $281{\pm}115%$, which indicates that usage amounts of insecticide estimated by cultivation area are three times lower than those based on shipments.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.2
• /
• pp.89-92
• /
• 1982

Persistence of cyanofenphos on Chinese cabbage under the different climate conditions was studied by spraying the insecticide at the rate of 0.5 and 0.75 ㎏ AI/ha at 22 and 36 days after transplanting and monitoring its residues upto 35 days after the final spray. At both spraying rates the degradation patterns of the insecticide, regardless of climate condition, showed similar trends; cyanofenphos residues on Chinese cabbage declined rapidly upto 14 days after the final spray but more slowly thereafter. Half-life for cyanofenphos on Chinese cabbage was $6{\sim}7$ days. The half-life was little affected by the spraying rate and time. Based on the FAO/WHO maximum residue limit of cyanofenphos on common cabbage (2 ppm), it is recommended that the pre-harvest intervels of the insecticide on Chinese cabbage could be 16 and 19 days for 0.5 and 0.75 ㎏ AI/ha, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.1
• /
• pp.59-64
• /
• 2014

Objectives: The principal aim of this study is to investigate and analyze domestic usage amounts of insecticide in rice cultivation in order to provide fundamental data for establishing a job-exposure matrix(JEM) related to farmers working with agricultural insecticides. Materials and Methods: An investigation of domestic usage amounts of insecticides rice cultivation was performed through two methods. The first method utilized information on agricultural pesticides published annually by the Korea Crop Protection Association(KCPA). The second method made use of area of cultivation of rice as officially determined by Statistics Korea(SK). An estimation of domestic usage of insecticides in rice cultivation through the second method was determined by multiplying the total cultivation area of rice($m^2$) by the optimal spray volume of insecticides for rice cultivation per unit of cultivation area($kg/m^2$). Results: As a result of the analysis of public data regarding insecticides in rice cultivation, it was found that the domestic usage amount has decreased sharply from the first year of market sales(1969) to the final data year(2012). There is little difference in the annual usage trend of insecticides in rice cultivation between shipment and estimation. Also, the annual usage trends of insecticides in rice cultivation based on regional classification were nearly similar to those based on the overall aspect. Conclusions: The region which used the largest volume of insecticide in rice cultivation in Korea was the Jeolla Provinces, followed by the Gyeonsang Provinces, the Chungcheong Provinces, Seoul/Gyeonggi Province, Gangwon Province and Jeju Province. Substantially, the mean ratio of usage amounts of insecticide based on shipments and those based on estimation by cultivation area was $96{\pm}29%$, which indicates that the domestic usage amount of insecticide for rice cultivation corresponded to the optimal spray standard per unit area.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.46-51
• /
• 2009

This paper presents results from field studies carried out to monitor off-target droplet movement of endosulfan insecticide applied to the Korea chestnut tree area. As a results, mean airborne drift values were recorded 25m as average from downwind of a single flight line(sample line) in mountain terrain and mean effective swath width was recorded 19.5m as average in a plain. In terms of characteristics of geography of Korea aerial application is mainly carried out in mountain terrain. The equipment, weather conditions, and appropriate aerial spray technic are required for effective aerial application. In particular, the pilot can get effective results when he only sprays with consideration of environment factors since there is much turbulence in mountain terrain. Eventually, the most effective factor of droplets drift is to estimate the local weather conditions exactly.

• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.123-158
• /
• 2009

An attempt was made to stimulate future research by providing exemplary information, which would integrate published knowledge to solve specific pest problem caused by resistance. This review was directed to find a way for delaying resistance development with consideration of chemical(s) nature, of mixture, rotation, or mosaics, and of insecticide(s) compatible with the biological agents in integrated pest management (IPM). The application frequency, related to the resistance development, was influenced by insecticide activity from potentiation, residual period, and the vulnerability to resistance development of chemical, with secondary pest. Chemical affected feeding, locomotion, flight, mating, and predator avoidance. Insecticides with negative cross-resistance by the difference of target sites and mode of action would be adapted to mixture, rotation and mosaic. Mixtures for delaying resistance depend on each component killing very high percentage of the insects, considering allele dominance, cross-resistance, and immigration and fitness disadvantage. Potential disadvantages associated with mixtures include disruption of biological control, resistance in secondary pests, selecting very resistant population, and extending cross-resistance range. The rotation would use insecticides in high and low doses, or with different metabolic mechanisms. Mosaic apply insecticides to the different sectors of a grid for highly mobile insects, spray unrelated insecticides to sedentary aphids in different areas, or mix plots of insecticide-treated and untreated rows. On the evolution of pest resistance, selectivity and resistance of parasitoids and predator decreased the number of generations in which pesticide treatment is required and they could be complementary to refuges from pesticides To enhance the viability of parasitoids, the terms on the insecticides selectivity and factors affecting to the selectivity in field were examined. For establishment of resistant parasitoid, migration, survivorship, refuge, alternative pesticides were considered. To use parasitoids under the pressure of pesticides, resistant or tolerant parasitoids were tested, collected, and/or selected. A parasitoid parasitized more successfully in the susceptible host than the resistant. Factors affecting to selective toxicity of predator are mixing mineral oil, application method, insecticide contaminated prey, trait of individual insecticide, sub-lethal doses, and the developmental stage of predators. To improve the predator/prey ratio in field, application time, method, and formulation of pesticide, reducing dose rate, using mulches and weeds, multicropping and managing of surroundings are suggested. Plant resistance, predator activity, selective insect growth regulator, and alternative prey positively contributed to the increase of the ratio. Using selective insecticides or insecticide resistant predator controlled its phytophagous prey mites, kept them below an economic level, increased yield, and reduced the spray number and fruits damaged.

• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.21-28
• /
• 2004

Spraying is one of the most efficient methods for pesticide and insecticide control. Generally, orchard sprayers(aircarrier sprayer) are used for such applications. However, when an orchard sprayer is used, only 20% of total amount of spray deposits on the target. The rest of spray are not only wasted but are also potential sources of environmental pollution. The research far the development of electrostatic spraying system for orchard sprayer was conducted to develop the new pesticide application technology for the reduction of environmental pollution and f3r the production of safe agricultural products. The spray characteristics for nozzles with the different charging methods were tested and the effect of electrostatic charge was analyzed, in the laboratory experiments. The results of this study indicate that the capacitive type of electrostatic spraying nozzle exhibits a large current deposition of water sprays on the sample target. The covering area ratio by conventional spraying system was 10.2%, while that of electrostatic sprays with pulse induction charging method gave the increased covering area ratio by 4.3 times.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.284-288
• /
• 2010

A series of experiments was carried out for selecting insecticides and determining proper spraying time to control pea weevil (Bruchus pisorum Linnaeus) in Jeonnam area. In the field trial two times spray with diazinon, carbaryl, imidacloprid, spinosad, etofenprox, clorpyrifos-methyl showed good control effect and threetimes spray showed the better control effect. The second spray (spraying on 10th of May) took the major role of insecticide effectiveness expression for controlling pea weevil. Further trial for selecting insecticides among organophosphates to control pea weevil in lab was conducted and every organophosphate insecticide tested was very effective to pea weevil even at the concentration of one forth of its recommending concentration.

• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.239-245
• /
• 2013

Occupational exposure and risk assessment were conducted to evaluate the safety of operators when insecticide acetamiprid was applied to apple orchard using a speed sprayer. Dermal patches, cotton gloves, socks, and masks were used to monitor the dermal exposure, and personal air pump with solid sorbent was used to measure the potential inhalation exposure. In validation to analytical methods, the limit of detection and limit of quantitation were 0.25 ng and 1 ng, respectively. Good reproducibility (coefficient variation < 4%), linearity (coefficient determination > 0.999), and recovery (85.3-118.2%) were obtained. Trapping efficiency of solid sorbent was 96.4% while breakthrough did not occur. Only hand exposure was measured on the gloves during mixing/loading to give $33-1,132{\mu}g$. Exposure amount of operator 3 among 4 workers was noticeably high. The total volumes of spray liquid for operators were $535-1,235mL{\cdot}h^{-1}$, corresponding to 0.03-0.08% of the applied spray solution. Highest contaminated parts of body were thighs, chest, and lower legs. The inhalation exposure ratio to the total application amount was significantly low. However, wind seemed to affect the inhalation exposure of operator. For risk assessment, margin of safety was calculated by the application of cloth and dermal penetration rate to obtain values of much larger than 1 in all cases. Therefore, health risk of operators during treatment of acetamiprid in apple orchard could be of least possibility.