• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.8-14
• /
• 1999

The active devices used at microwave frequency have the different phase shift according to input power. Especially, The difference of the phase shift is large in the saturation region of the amplifier. In this paper, we disigned the phase control system for fixing the different phase shift at device. With the high frequency nonlinear amplifier, we fabricated such system that the phase shift to be fixed automatically using the varible phase shifter. The variable phase shifter fixed total phase variation of the circuit using the information that was obtained from the comparison of imputsignal phase with output signal phase. Even though the input signal is 2-tone or FM type, we could estimate and also fix the phase variation on DUT Dynamic range is about 10dB. It has been experimented at 1960MHz using Teflon (H=31mil, ${\varepsilon}r$=3.2)

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.30-39
• /
• 2011

In this note, a systematic design of a new robust nonlinear continuous variable structure control system(VSCS) based on the modified state dependent nonlinear form is presented for the control of uncertain affine nonlinear systems with mismatched uncertainties and matched disturbance. After an affine uncertain nonlinear system is represented in the form of state dependent nonlinear system, a systematic design of a new robust nonlinear VSCS is presented. The uncertainty of the nonlinear system function is separated into the tow parts, i.e., state dependent term and state independent term for extension of target plants. To be linear in the closed loop resultant dynamics and in order to easily satisfy the existence condition of the sliding mode, the transformed linear sliding surface is applied. A corresponding control input is proposed to satisfy the closed loop exponential stability and the existence condition of the sliding mode on the linear transformed sliding surface, which will be investigated in Theorem 1. For practical application, the discontinuity of the control input as the inherent property of the VSS is improved dramatically. Through a design example and simulation studies, the usefulness of the proposed controller is verified.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.254-260
• /
• 2013

This paper deals with electromagnetic characteristics of IPMSM (Interior Permanent Magnet Synchronous motor) caused by field weakening current control. In order to extend operation speed, field weakening current control is generally used in IPMSM operation. During field weakening, distorted linkage fluxes are resulted by saturation of core material. Therefore, distorted input voltage waveform is required for sinusoidal current input. As the current vector angle increases for field weakening, distortion of linkage flux and back-emf becomes significant. This situation is analyzed by 2-dimensional finite element analysis and verified by experiment. With the results, it is concluded that motor parameters, such as linkage flux by permanent magnet, phase resistance, d-q axis inductance, are insufficient for estimating required voltage for given speed especially in field weakening and additional considerations for increased harmonics of voltage are required.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.85-92
• /
• 2017

Recently, electric propulsion systems are used for unmanned surface vehicle, fish finder boat, etc. Some of these propulsion systems can be constructed of two electric motors and propellers for advanced impellent force. In this case, the speed difference generated between two propellers, namely, the synchronous error has a bad influence on the energy efficiency and course error. In this study, a synchronous control system is designed to restrain synchronous error caused by disturbance and mismatched dynamic characteristics. The control system is composed of the reference model, pre-filters, speed controllers, and synchronous controllers. The reference model is used for calculating the decoupled synchronous error and control input for each propulsion system. The pre-filters and speed controllers are designed in order that the propulsion system may follow the reference signal without overshoot and input saturation. And the synchronous controllers are designed from the viewpoint of stable and quick synchronization through root locus mothed approach. Finally, the simulation results show that the designed control system is effective for the disturbance.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.15-21
• /
• 1999

The scalability of optical cross-connect nodes is analyzed based on the limiting factor of transmission performance. The limiting factors considered are ASE noise accumulation and gain saturation in the optical amplifiers, and crosstalk in both wavelength multiplexers/demultiplexers and optical switches. When the wavelength multiplexer/demultiplexers crosstalk is lower than 25dB, Power Penalty is below 1dB for the cascaded transmission of 10 nodes with 4 input/output ports. When 10Gbps signals are transmitted through nodes with 4 and 16 input/output Ports, performance degradation due to switch crosstalk is dominant compared to that due to ASE noise accumulation if the switch crosstalk is larger than 30dB and 45dB, respectively. For the single stage transmission of 10Gbps signal with 21dB fiber link loss, the maximum loss of optical cross-connect nodes must be under 34dB to achieve the BER of $10^{-12}$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.26-33
• /
• 2002

In this paper, a new four-quadrant MOS analog multiplier Is proposed using the quarter-square technique, which is based on the quadratic characteristics of MOS transistor operating in the saturation region and the difference operation of a source-coupled differential circuits. The proposed circuit has been fabricated in a p-well CMOS process. The multiplier achieves a total harmonic distortion of less than 1 percent for the both input ranges of 50 percent of power supply, a -3㏈ bandwidth of 30㎒ a dynamic range of 81㏈ and a power consumption of 40㎽. The active chip area is 0.54㎟. The supposed multiplier circuit is simple and adjust high frequency application because one input signal transfer output by one transistor.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.623-624
• /
• 2006

In this paper, we introduce the design and fabrication of V-band power amplifier MMIC with excellent gain-flatness for IEEE 802.15.3c WPAN system. The V-band power amplifier was designed using ETRI' $0.12{\mu}m$ PHEMT process. The PHEMT shows a peak transconductance ($G_{m,peak}$) of 500 mS/mm, a threshold voltage of -1.2 V, and a drain saturation current of 49 mA for 2 fingers and $100{\mu}m$ total gate width (2f100) at $V_{ds}$=2 V. The RF characteristics of the PHEMT show a cutoff frequency, $f_T$, of 97 GHz, and a maximum oscillation frequency, $f_{max}$, of 166 GHz. The gains of the each stages of the amplifier were modified to have broadband characteristics of input/output matching for first and fourth stages and get more gains of edge regions of operating frequency range for second and third stages in order to make the gain-flatness of the amplifier excellently for wide band. The performances of the fabricated 60 GHz power amplifier MMIC are operating frequency of $56.25{\sim}62.25\;GHz$, bandwidth of 6 GHz, small signal gain ($S_{21}$) of $16.5{\sim}17.2\;dB$, gain flatness of 0.7 dB, an input reflection coefficient ($S_{11}$) of $-16{\sim}-9\;dB$, output reflection coefficient ($S_{22}$) of $-16{\sim}-4\;dB$ and output power ($P_{out}$) of 13 dBm. The chip size of the amplifier MMIC was $3.7{\times}1.4mm^2$.

• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.642-649
• /
• 2018

The effect of gas sparging on sonochemical oxidation was investigated in a 300 kHz sonoreactor under various liquid height/volume conditions ($5{\sim}30{\lambda}$, 3.4 ~ 9.0 L), determined by the wavelength of the applied frequency. The electrical input power was maintained constant for all cases . Sonochemical activity drastically decreased from $15{\lambda}$ and the liquid height of $10{\lambda}$ was suggested as the optimal height for 300 kHz without gas sparging. In our previous research, the sonochemical activity observed was five-times higher when air sparging was applied for 36 kHz. On the other hand, no enhancement was obtained at 10, 15, 25 and $30{\lambda}$ using air sparging (1, 3, and 6 L/min) for 300 kHz in this study $20{\lambda}$ and optimization of gas sparging was conducted at $20{\lambda}$ using various gases including air, Ar, $O_2$, $N_2$, and mixtures of Ar and $O_2$. It was found that gas sparging using pure Ar or pure $O_2$ resulted in lower sonochemical activity compared to that of air sparging due to the imbalance between the intensity of cavitation phenomena and the generation of oxidizing radical species. Consequently, the gas mixture of $Ar:O_2$ = 80 % : 20 % (DO saturation ${\approx}100%$) was suggested as an optimal gas sparging condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.731-734
• /
• 2009

In this paper, we propose the method the vehicle color recognizing in the image including a vehicle. In an image, the color feature vector of a vehicle is extracted and by using the backpropagation learning algorithm, that is the multi-layer perceptron, the recognized vehicle color. By using the RGB and HSI color model the feature vector used as the input of the backpropagation learning algorithm is the feature of the color used as the input of the neural network. The color of a vehicle recognizes as the white, the silver color, the black, the red, the yellow, the blue, and the green among the color of the vehicle most very much found out as 7 colors. By using the image including a vehicle for the performance evaluation of the method proposing, the color recognition performance was experimented.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.339-343
• /
• 2022

In this study, a method for simplifying the structure of the VDES RF receiver, and the gain control method of the receiver to comply with the international standard in this structure was described. The input level of the wanted signal and unwanted signal to the receiver was defined, and when the two signals were input, the saturation state at the ADC was checked at the receiver output. As a result of the simulation by the circuit simulator, it was satisfied that the output power of the receiver was in the SFDR region of ADC with respect to the adjacent channel interference ratio, intermodulation, and blocking level. Through this study, it was found that the structure of th proposed RF receiver conforms to the international standard.