• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.75-79
• /
• 2015

In this study, we investigated the electro-optical (EO) characteristic of fringe-field switching (FFS) mode cell by the ion beam alignment method on the a-C:H thin film. The suitable inorganic thin films for FFS cell and the aligning capabilities of nematic liquid crystal (NLC) using the new alignment material of a-C:H thin film were studied. An excellent voltage-transmittance (V-T) and response time curve of the ion beam aligned FFS-LCD was observed with oblique ion beam exposure on the a-C:H thin films. Also, the V-T hysteresis characteristics of the ion beam-aligned FFS-LCD with IB exposure on the a-C:H thin films is almost the same as that of the rubbing-aligned FFS cell on a polyimide surface.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.390.1-390
• /
• 2001

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.239-245
• /
• 1995

Mn-Zn ferrite thin films were deposited on $SiO_2(1000 \AA)/Si(100)$ by ion beam sputtering using a single ion source. A mosaic target consisting of a single crystal(ll0) Mn-Zn ferrite with a Fe metal strip on it was used. As-deposited films without oxygen gas flow have a wiistite structure due to oxygen deficiencies, which originated from the extra metal atoms sputtered from the metal strips during deposition. The as-deposited films with oxygen gas flow, however, have a spinel structure with (111) preferred orientation. The crystallization of thin films was maximized at the ion beam extraction voltage of 2.lkV, at which the deposited films are bombarded appropriately by the energetic secondary ions reflected from the target. As the extraction voltage increased or decreased from the optimum value, the crystallinity of thin films becomes poor owing to a weak and severe bombardment of the secondary ions, respectively. Crystallization due to the bombardment of the secondary ions was also maximized at the beam incidence angle of $55^{\circ}$. The as-deposited ferrite thin films with a spinel structure showed ferrimagnetism and had an in-plane magnetization easy axis.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.121-128
• /
• 2013

The concern for dissolved phosphate in water/wastewater has been increasing because of the risk for eutrophication. A variety of conventional and advanced technologies were applied to meet the enforced new regulation of phosphate around the world. However, there still remained a lot of challenge because most introduced/developed method, for example, biological and physic-chemical treatment is not easy to satisfy the new regulation of phosphate in water. In order to meet the new regulation, the application of ion exchanger has been tried which showed that the removal efficiency for phosphate was strongly determined by in the presence of the competing ion, especially sulfate. As results, a new class of ion exchanger governed by ligand exchange was developed and investigated to increase the selectivity for phosphate. The current study using organic/inorganic anion exchanger developed with Lewis acid-base interaction confirms the selectivity for phosphate over sulfate. According to isotherm test and column test, the value of the maximum phosphate uptake (Q) showed 64 mg/g as $po{_4}^{3-}$ and the breakthrough for phosphate occurs after 1000 min and completely finishes at 2500 min, respectively.

• Journal of Ecology and Environment
• /
• v.35 no.4
• /
• pp.351-358
• /
• 2012

To investigate the environmental adaptation and ecophysiological characteristics of Suaeda maritima and S. asparagoides under saline conditions, plant growth and density were analyzed according to environmental changes of habitats. The total ion content of soil decreased with time, which was caused by the predominance of exchangeable $Na^+$ and $Cl^-$ in the upper layers. The population of S. maritima was more densely distributed in the region with higher ion contents of $Cl^-$, $Mg^{2+}$, $K^+$ and $Na^+$ than the population of S. asparagoides. Both species were showed a decreased population density according to increases in plant growth. Under the conditions of a salt field, S. maritima and S. asparagoides contained high inorganic ions to maintain low water potential, but low water soluble carbohydrate contents. In the case of free amino acid, S. maritima showed an especially high proline content, and contained rather large amounts of free amino acids, whereas S. asparagoides did not. Both species showed high inorganic ion contents in the leaves, which might be a mechanism of avoiding the ionic toxicity by diluting the accumulated ionic concentration with a high ratio of water content to dry weight. This result suggests that S. maritima seems to adapt to saline conditions by accumulating proline in addition to inorganic ions. S. asparagoides seems to adapt by osmoregulation processes, using inorganic ions rather than free amino acids.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.22-30
• /
• 2021

Objectives: The objectives of this study were to develop a quality control protocol of inorganic acids using ion chromatograph and to evaluate analytical proficiency of the legally designated agencies. Methods: This study prepared inorganic acid samples by injecting three anion certified solutions (chloride, nitrate, and sulfate) on the quartz filters. To investigate the storage stability and concentration consistency of the samples, 240 samples for each anion were tested at weeks 0, 2, 4, 8, 12, and 16 while storing at 4℃ and 25℃. To evaluate analytical proficiency, two separate testings were administrated for six skilled analysts and 46 analysts affiliated with legally designated agencies. Results: Average recoveries of the three ions after 16 weeks of storage were fairly high (over 95%). In addition, average recoveries (chloride = 97%, nitrate = 96%, and sulfate = 103%) after 16 weeks of storage at low temperate were relatively higher than those (94%, 93%, and 98%) at room temperature. The coefficients of variation (CV) for the three ions were less than 5% except for the sulfate sample at 5.56 ㎍ (CV = 12.4%). The average ratios of the concentration values analyzed by the legally designated agencies to the injected concentrations were close to 1. However, their CVs were relatively greater (chloride ≤ 49%, nitrate ≤ 14%, and sulfate ≤ 28%), which implies a need for quality control. Conclusions: The quality control protocol used in this study for the three inorganic acids can be utilized in the quality control for ion chromatography.

• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.1
• /
• pp.90-96
• /
• 1994

Changes in haemolymph proteins, hydrolases such as esterase(EST), acid phosphatase(ACP) and alkaline phosphatase(ALP) , and inorganic ion(Na+, K+ and Cl- ) contents were induced by the injection of Bacillus thuringiengis into haemocoel of the last instar larva of Heliothis assulta. Protein concentration of haemolymph was increased until 24 hrs after injection, and decreased thereafter. Among the 8 basic protein bands identified through acid - polyacrylamide gel electrophoresis(PAGE), 2 bands(bands a and b) became stronger by the bacterial infection. Activities of EST and ALP increased until 12 hrs after injection and then fell down, whereas ACP activity was decreased continuously with time after injection. Contents of inorganic ions were all increased by the bacterial injection, showing slow rate of increase in the chloride ion, but rapid in the sodium and potassium ions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1155-1158
• /
• 2004

Various inorganic alignment layers of nematic liquid crystal (NLC) molecules were investigated. Ar ion beam (IB) irradiation was utilized for alignment method and homogenous and homeotropic orientations with tilt angle were obtained on the suitable inorganic thin films. Proper doping materials were added to diamond-like carbon (DLC) films. In the case of homogeneous alignment, nitrogen doping affected the increase of pretilt angle, while the fluorine bonding in the DLC films was induced the tilted homeotropic alignment cause its extreme hydrophobic property. These results showed that ion beam irradiation method could be applied to the various alignment mode of NLC such as IPS, TN and MVA.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.328-329
• /
• 2005

Inorganic alignment layer (IAL) was deposited on an indium-tin-oxide (ITO) by using reactive sputtering deposition method. After deposited, IAL was irradiated by $Ar^+$ ion beam (IB) for liquid crystal (LC) alignment. IAL treated by various conditions such as IB energy, IB incident angle, and IB irradiation time had excellent alignment property and electro-optical property the same as that of PI. We investigated into the stability of ion beam treated IAL after a lapse of long time. However IAL irradiated IB did not occur degradation of electro-optical property. The results implied that IAL irradiated IB was adopted as LC alignment layer instead of rubbed polyimide.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.30-36
• /
• 1998

The plasma-spray technique is currently the most frequently used method to produce calcium phosphate coatings. Hydroxyapatite(HAp), one form of calcium phosphate, is preferred by its ability to form a direct bond with living bone, resulting in improvements of implant fixation and faster bone healing. Recently, concerns have been raised regarding the viable use and long-term stability of plasma-spray HAp coatings due to its nature of comparatively thick, porous, and poor bonding strength to metal implants. Thin layers (maximum of few microns) of calcium phosphate were formed by an e-beam evaporation with and without ion bombardments. The Ca/P ration of film was controlled by either using the evaporants having the different ration of Ca/P with addition of CaO, or adjusting the ion beam assist current. The Ca/P ration had great effects on the structure formation after heat treatment and the dissolution bahavior. The calcium phosphate films produced by IBAD exhibited high adhesion strength.