• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.629-638
• /
• 2016

In this study, the effect of inorganic constituents on the physicochemical properties of pyrolytic products produced from empty fruit bunch (EFB) by fast pyrolysis were investigated. Inorganic constituents were removed from the EFB by means of washing treatment with hydrofluoric acid (HF) and distilled water (D.I water). Ash content decreased from 6.2 wt% (EFB) to 2.4 wt% (HF-EFB) and 3.5 wt% (D.I-EFB), respectively. As a result of the inorganic component, a quantity of potassium in EFB has showed the highest removal efficiency in both HF and D.I water (HF: 80.3%, D.I water: 72.8%). Fast pyrolysis was performed with demineralized EFB in the fluidized bed reactor under the temperature of $500^{\circ}C$ at the residence time of 1.3 sec. The yield of bio-oil was determined to 57.3 wt% for HF-EFB and 52.1 wt% for D.I-EFB, respectively. Biochar yield decreased whereas yield of non-condensable gas increased with decreasing inorganic content of EFB. Water content decreased from 26.9% (EFB) to 9.9% (HF-EFB) and viscosity increased from 16.1 cSt (EFB) to 334 cSt (HF-EFB).

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.171-176
• /
• 1991

Field experiment was conducted to investigate the seasonal change in inorganic nitrogen content in grassland soil profile after urea application. Urea was applied at the levels of 0 (0N), 14 (14N), and 28 (28N) Kg N per 10a. Soil samples were taken at every 20 cm interval upto 100 cm soil depth in spring (May 26), summer (July 27), and autumn (October 18) and analysed for total and inorganic nitrogen ($NH_4-N$ and $NO_3-N$). The results obtained are as follows ; 1. In spring, the $NH_4-N$ content of ON treatment was higher than $NO_3-N$ content both in surface and subsoil. The urea application increasing both $NH_4-N$ and $NO_3-N$ contents in the surface soils and these contents decreased with soil depth. 2. In summer, increase in urea application rate elevated the $NO_3-N$ content in soil profile of 0 to 100cm and the content reached upto 42 ppm in the 28N treatment. 3. The seasonal difference in $NH_4-N$ content between summer and autumn was insignificant throughout soil profile. Soil $NO_3-N$ content in autumn were 7 and 14 ppm for 14N and 28N respectively, showing very low values compared with that of summer. 4. The ratio of inorganic nitrogen to total nitrogen increased with soil depth and with urea application rates.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.28-29
• /
• 2016

Recently, the attention on high tensile, and high performance cementitious composite (HPFRCC) which can minimize the damage from explosion of inflammable gas and chemicals has been increased. In spite of outstanding tensile performance, HPFRCC has the drawbacks of fiber ball, undesirable cost, and high autogenous shrinkage. therefore, in this research, to develop the optimum HPFRCC, the fundamental properties and autogenous shrinkage of HPFRCC was analyzed depending on various combination and content of organic and inorganic fibers.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.4
• /
• pp.273-279
• /
• 2010

The study result survey platycodon cultivation regions of Jinju(2), Sacheon(4), Hapcheon(3), Haman(3), and Sancheong(3) of Gyongnam regarding chemical properties of soil, inorganic nitrogen phosphorus by type of composition is as follows: pH and EC value were highest where platycodon cultivated for under 3 years in soils. Content of O.M equal to or less than 25 mg $kg^{-1}$, the average value for platycodoncultivation in korea. Content of exchangeable calcium in soils were 12, 14 $cmol^+kg^{-1}$ in Hapcheon and Haman regions where platycodon was cultivated for two years which is 2~3 time higher level compared with the average upland soil of korea. Water solution boron confirmed approximated level of 3.0 mg $kg^{-1}$ in all survey regions, and the finding is about five times higher than average upland soil of korea which is 0.5 mg $kg^{-1}$. In the case of nitrogen, a significant difference was found depending on cultivation regions and continuous culture. Content of nitrogen in soils were difference according to cultivation area and continuous culture. The composition ratio according to the type of inorganic phosphorus showed the highest in order of Al-P > Ca-P > Fe-P > Saloid-P in all survey regions except for Hapcheon (five, seven years cultivated soils). The correlation showed high significance between available phosphate and inorganic phosphorus.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.27-33
• /
• 2018

PURPOSES : The purpose of this study is to estimate the optimum content of an inorganic additive for cold-recycled asphalt mixtures and evaluate its performance. METHODS : An indirect tensile test, a tensile-strength ratio test, and an indirect tensile-fatigue test were conducted on cold-recycling asphalt mixtures with various additives. RESULTS : The laboratory performance tests indicated that granulated blast-furnace slag mixed with inorganic and cement activators provided optimum performance. The performance results of the cold-recycled asphalt pavement were similar to the inorganic and cement activators' performance in terms of the indirect tensile strength, tensile strength ratio, and indirect tensile-fatigue test. CONCLUSIONS : Overall, the performance of a cold-recycled asphalt mixture using inorganic additives and emulsion asphalt was comparable to a warm-recycled asphalt mixture. However, more experiments aimed at improving its performance and studying the effect of the inorganic additives must be conducted.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.137-142
• /
• 2017

PURPOSES :The objective of this study is to evaluate the performance of asphalt mixtures containing inorganic additive and a high content of reclaimed asphalt pavement (RAP). METHODS : The laboratory tests verified the superior laboratory performance of inorganic additive compared to cement, in cold recycled asphalt mixtures. To investigate the moisture susceptibility of the specimens, tensile strength ratio (TSR) tests were performed. In addition, dynamic modulus test was conducted to evaluate the performance of cold recycled asphalt mixture. RESULTS :It was determined that NaOH solution mixed with $Na_2SiO_3$ in the ratio 75:10 provides optimum performance. Compared to Type B and C counterparts, Type A mixtures consisting of an inorganic additive performed better in the Indirect tensile strength test, tensile strength ratio test, and dynamic modulus test. CONCLUSIONS : The use of inorganic additive enhances the indirect strength and dynamic modulus performance of the asphalt mixture. However, additional experiments are to be conducted to improve the reliability of the result with respect to the effect of inorganic additive.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.967-974
• /
• 2000

By testing compressive strength, water absorption and water premeablity, to establish the standard of quality of waterproofing admixture of power type for concrete, we propose guide line as following ; $.$Setting time: more than 1 hour, within 10 hours $.$Slump: To be satisfied with request of user $.$Air content: To be satisfied with request of user $.$Safety: Without crack or deformation $.$Ratio of compressive strength: $\circled1$ At 3 days : more than plain specimen by 0.9 (An inorganic material) more than plain specimen by 0.4 (An inorganic material mixed organic) $\circled2$ At 7, 28 days : more than plain specimen by 1.0 $.$Ratio of water absorption Coefficient: $\circled1$An inorganic material: less than plain specimen by 1.0 $\circled2$ An inorganic material mixed organic : under than plain specimen by 0.8 $.$Ratio of water premeablity : $\circled1$ An inorganic material : less than plain specimen by 1.0 $\circled2$ An inorganic material mixed organic : under than plain specimen by 0.8

• Journal of the Korean institute of surface engineering
• /
• v.22 no.3
• /
• pp.109-117
• /
• 1989

The effect of heft treatment on the characteristic properties of insulation layer is studied for two kinds of non-oriented silicon steels, which were insulation-coates with various kinds of inorganic and inorganic-organic complex coating solutions. In addition, how the carbon contained in the insulation layer would affect the carbon content and the magnetic properties of the steel substrates is examined. Lower temperature heat treftment ($480^{\circ}C$ for 0.5hr) is found to render morw favorable surface qualities, wheras higher temperature heat treatment ($790^{\circ}C$ for 2hr) better core loss due to grin growt occurred during the heat treatment. Decarburization of the steel substrate is also found unaffectrd by the presence of carbon in the insulation layer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.50-58
• /
• 2020

When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.

• Particle and aerosol research
• /
• v.6 no.4
• /
• pp.151-164
• /
• 2010

Inorganic ions and water are major components of ambient fine particles. Water content in fine particles is mainly determined by ambient meteorological conditions and the concentrations of hygroscopic species such as inorganic ions. Thus, to reduce fine particle mass concentration, it is important to accurately estimate the relationship between water content and the concentration of ions in fine particles. Water content in fine particles in Seoul are estimated by using a gas/particle equilibrium model to understand the characteristics of fine particle mass concentration. In addition, sensitivity of fine particle mass concentration to the changes of particulate ionic species (sulfate, nitrate, and ammonium) is estimated. It was found that water content in Seoul is mostly determined by the concentrations of the hygroscopic ionic species, especially, sulfate and ammonium, and ambient relative humidity.