• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.599-603
• /
• 2000

Objectives : In lumbar spine surgery it is observed that the ligamentum flavum(LF) is bilayered, and the inner layers can be left in situ to prevent peridural adhesion in open lumbar disc surgeries. The purposes of this study are to investigate ultrastructural differences between the inner and outer layer of lumbar LF by electron microscopic examination, and to see whether these differences are, if present, more prominent in chronic degenerative lumbar spinal disorders as compared with acute lumbar disc diseases. Methods : Biopsy specimens of LF were obtained from nine patients undergoing lumbar spine surgery, five of them for degenerative spinal stenosis and four for acute disc herniation. During the surgery the outer layers of LF were carefully dissected from the inner layer, and four pieces($1{\times}1{\times}1-mm$) of biopsy samples were made from each layer. These were examined with electron microscope for the morphologies and the contents of the elastic and the collagen fibers. Results : The outer layer of LF showed elastic fiber degeneration as evidenced and decreased fiber content, while the inner layer was relatively preserved in both cases of degenerative spinal stenosis and acute disc herniation. The ultrastructural changes of the layers were more evident in the outer layer. Conclusion : With these observations the authors believe that the LF degeneration may occur mainly in the outer layer, and that this fact may aid in making the rationale for using the inner layer as physiologic barrier to prevent peridural adhesion in open lumbar disc surgeries.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1552-1561
• /
• 1997

In this numerical study, it is investigated for the ice-formation phenomena for water flow in a concentric tube. The freezing layers of ice in both the inner and outer wall of a concentric tube are simultaneously considered. In the solution strategy, the complete set of governing equations in both the solid and liquid regions are resolved. Numerical results are obtained by varying the inner/outer wall temperatures and Reynolds number. The results show that the inner/outer wall temperatures have the great effect on the thickness of the solidification layer thereof. The shapes of ice layer in both the inner and outer wall can be expressed as a function of inverse Graetz number. As the wall temperature in inner or outer tube decreases, the heat transfer coefficients in both inner and outer ice layer surfaces increase absolutely.

• Korean Journal of Rural Living Science
• /
• v.10 no.2
• /
• pp.78-84
• /
• 1999

This study was performed to find out the usefulness of chestnut powder recovered from the inner layer, which used to be discarded. After the Physicochemical properties of the chestnut powder were examined, breads were prepared with 10-50% of chestnut Powder and the sensory quality was compared by QDA. Bread could be made even using up to 50% of chestnut powder, and in 20-30% of chestnut powder, the sensory quality was acceptable enough compared with wheat bread. Even though the low purity of the chestnut powder affected the flavor and color, the breads contained it were generally acceptable. Therefore, the chestnut powder recovered from the inner layer can be used as the effective food resource as itself, and with the higher purification to remove inner layer, it can be applied to more diverse food.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.36-44
• /
• 2013

This study is focused on the debarking and xylem separation yield of Paper Mulberry. We investigated the most efficient manual on the automatic debarking and xylem separator machine. The bast tissues of Paper Mulberry were separated in three layers including black outer layer, green inner layer, and white inner layer. A target is to save the white inner layer of these three layers as much as possible. The experimental machine most characterize xylem separation and debarking by frictional force between the bulges and Paper Mulberry by the drum rotation. It is possible automatically to operate the machine by controlling the temperature sensor and the time. Debarking process can be know that removed black outer layer has beem accumulate and measured the weight. The content of the extract, holocellulose, lignin and ashes of the white inner layer was analyzed. It is result that conditions of optimum process of the experimental machine is 45 RPM, temperature at $60^{\circ}C$(60 min.) and $80^{\circ}C$(60 min.), mixing bulge of 10 mm(120ea) and 30 mm(120ea) and capacity of Paper Mulberry 10 kg.

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.26-29
• /
• 2005

Nanosize cobalt aluminate($CoAl_2O_4$) power was coated as filter layer for us to improve the color purity and contrast performances on the inner face of CRT panel. We simulated color properties by measuring the transmittance and thickness of the coated filter layer. Contrast performance could be improved and color gamut was also changed by the selective light absorption of filter layer at 580${\sim}$605 nm.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.77-82
• /
• 2009

The egg shell of the tropical tasar silkworm, Antheraea mylitta is formed from the substances secreted by the follicular epithelium during the late vitellogenic stage. TEM study reveals the inner travecular and outer lamellar layer of chorion. The travecular layer is composed of the innermost wax layer, inner and outer chorionic layer. The inner and outer chorionic layers are connected to each other by vertical pillers forming of cavities. The lamellar layer is perforated by the aeropyles. SEM study reveals the differentiation of an anterior surface of the egg shell into four zones-micropylar, edge, aeropyles crown and disc zone. In the mycosis infected eggs the aeropyles and egg-shell surface are fully packed with the hyphae of the fungus, Aspergillus sydowi blocking of plastron respiration and causing the death of developing embryo so that mycosis infected eggs become sterile.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.16-23
• /
• 2007

Oocyte surface in two Korean minnows, Rhynchocypris oxycephalus and R. kumgangensis was examined by light and electron microscope. In two species, the development of the oocyte was similar, but the follicular layer surrounding full-grown oocyte showed an evident difference. In R. oxycephalus, the follicular layer at the yolk vesicle stage became bilaminar with the retention of its outer squamous cell layer and the acquisition of an inner cuboidal or round cell layer just over the zona radiata. As the oocyte grows, the cuboidal cells of the inner follicular layer began to be replaced by columnar cells. At the yolk granule stage, the columnar cells secreted mucin to their cytoplasm (adhesive materials) and then surround the entire oocyte, as bundles of fence-shaped structures. Whereas, although the follicular layer of R. kumgangensis had an outer squamous layer and an inner cuboidal or round cell layer at the yolk vesicles as in R. oxycephalus, no inner cells were more changed with the retention of its cuboidal or round cells. Finally, in R. kumgangensis, the adhesive materials did not occur. In Korean two minnows, the structural difference in the oocyte surface seems to be related to their habitats and spawning characteristics as well as taxonomic characters.

• Journal of the Korean Society of Costume
• /
• v.66 no.5
• /
• pp.66-81
• /
• 2016

This study is designed to understand the problems of existing Korean male soldiers' winter uniform tops by researching its current state, and contribute to developing uniforms with improved size and motion appropriateness. Military bases were visited to research satisfaction of size and motion appropriateness of the current winter uniform tops. 193 soldiers were surveyed and interviewed, and the shape and fit of the standard sizes of the inner and outer layers of the current winter uniform were analyzed. Findings of this study are as follows. 1) Compared to the new combat uniforms that soldiers were wearing in their appropriate size (of the 44 sizes), there were many cases where the soldiers were not wearing winter uniform inner (of the 8 sizes) or outer (of the 18 sizes) layers in the correct size for their body. 2) A total of 37 combat uniform sizes appropriate for the body shapes were expected to be newly applied, and inside and outside layers of winter tops would be presented as sets of 14 different sizes in step with the new combat uniform sizes, instead of the existing 8 inside layer sizes and 18 outside layer sizes. 3) The inner and outer layer of the existing winter uniform tops had several problems with the shape and fit. First, the inner layer was shorter than the combat uniform. Its shoulder width was wide, but the sleeve length was short creating lack of coverage, and the angle connecting the sleeve and bodice was very small creating a high sleeve cap curve and narrow sleeve width that make motions difficult and cause discomfort. As for the outer layer, the hem moved up when soldiers bent over or adjusted the waist string so the top could not sufficiently cover, the shoulder width was wide and the sleeve length was short, requiring improvements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1175-1178
• /
• 2005

Nanosize cobalt aluminate($CoAl_2O_4$) power as filter layer was coated to improve the color purityand contrast performances on inner face of CRT panel. We simulated color properties by measuring the transmittance and thickness of the coated filter layer. Contrast performance could be improved and color gamut was also changed because of the selective light absorption of filter layer at $580{\sim}605\;nm$.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.31-34
• /
• 2008

The L-bending of inner-structure bonded sandwich sheet metal is examined to reduce springback and defects of bent parts. The specimen is composed of top and bottom layers and a middle layer with dimple type-inner-structure and each layer is bonded by resistance welding. This specimen with hollow type-inner-structure shows different bending characteristics from the conventional sandwich sheet metals with solid type-inner-structure. The experiments were conducted for two kinds of working conditions, that is, clearance and movement of first bent specimen for second bending. The deformed profile, bend angle and springback were investigated and compared and then the proper working conditions for L-bending of sandwich sheet metal were prosed.