• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.201-208
• /
• 2004

In this study a general Galerkin FE lubrication analysis method was utilized to analyze the complex lubrication performance of a spiral groove seal having an additional inner circular groove, which was designed for a chemical process mixer operating at a low speed of the maximum 500 rpm. Equilibrium seal clearance analyses under varying outer pressure revealed that the seal maintains a certain levitation seal clearance under the outer pressure of more than about 1.5 bar, regardless of a rotating speed. Also, under the normal outer pressure of 11 bar, the axial stiffness of the seal was predicted to have a high value of more than 7.0e+07 N/m, regardless of a rotating speed and thereby, the seal is expected to maintain a stable thickness of lubrication film under a certain external excitation acting.

• Tribology and Lubricants
• /
• 제21권2호
• /
• pp.53-62
• /
• 2005

In this study a general Galerkin FE lubrication analysis method was utilized to analyze the complex lubrication performance of a spiral groove seal having an additional inner circular groove, which was designed for a chemical process mixer operating at a low speed of the maximum 500 rpm. Equilibrium seal clearance analyses under varying outer pressure revealed that the seal maintains a certain levitation seal clearance under the outer pressure of more than about 1.5 bar, regardless of a rotating speed. Also, under the normal outer pressure of 11 bar, the axial stiffness of the seal was predicted to have a high value of more than 7.0 e + 07 N/m, regardless of a rotating speed and thereby, the seal is expected to maintain a stable thickness of lubrication film under a certain external excitation acting. A seal levitation test rig was designed and constructed. Experimental results at 500 rpm agreed well with analytical predictions and the applied lubrication analysis method was verified.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.859-867
• /
• 1998

An oil lubricated Herringbone aroove jounal bearing(HGJB) with eight-circular-profile grooves on the non-rotating bearing surface is analyzed numerically and experimentally. The load carrying capacity, attitude angle, stiffness and damping coefficients are obtained numerically for the various bearing configurations. The onset speed of instability is also examined for the various eccentricity ratios. The configuration parameters of HGJB, such as groove depth ratio, groove width ratio, and groove angle, are dependent on each other because the grooves are generated by using eight small balls rolling over the inner surface of the sleeve with press fit. Therefore, it is not allowed to suggest a set of optimal design parameters such as the one for the rectangular profile HGJB. The overall results from numerical and experimental analysis prove that the circular profile HGJB has an excellent stability characteristics and the higher load carrying capacity than the plain journal bearing.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.92-98
• /
• 2014

Transmission fluid film behaviors in the gap between the wet clutch pad and separator plate are analyzed using the CFD software ADINA. Three pattern groove designs are selected and are used to validate the fluid film behaviors based on the outlet flow in the gap when the wet clutch pad and separator plate are engaged. The main design goal for pattern grooves is faster engagement. In most cases, much of the outlet flow of transmission fluid in the gap occurs on the outer radius boundary due to the centrifugal force generated by the clutch pad circular motion. Groove patterns are created to ensure faster transmission fluid outlet flow in the direction of the inner radius boundary. Computational results of the selected groove patterns are compared.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.150-157
• /
• 2003

In this paper, the large deformation of hollow silicon rubber gasket is treated. The frictional contact occurs between groove and the outer part of hollow gasket, and the frictional self-contact exists in the inner parts of hollow gasket. The silicon rubber has the nonlinear elastic behavior and its material property is approximately incompressible. Hence, the stress analysis requires an existence of a strain energy function, which is usually defined in terms of invariants or stretch ratio such as generalized Mooney-Rivlin and Ogden model. Considering large compressive deformation and friction, Mooney-Rivlin 3rd model and Coulomb's friction model are assumed. The numerical analysis is obtained by the commercial finite element program MARC. But, due to large deformation, the elements degenerate in the inner parts of hollow gasket. This means that the analysis of subsequent increments is carried out with a very poor mesh. In order to continue the analysis with a sufficient accuracy, it is necessary to use new finite element modeling by remesh. Experiments are also performed to show the validity of present method. As a conclusion, numerical results by this research have good agreements with experiments.

• 한국가금학회지
• /
• 제26권3호
• /
• pp.171-177
• /
• 1999

This study was conducted for the histological observation of the infundibulum of the oviduct of the laying Korean native pheasants. The results are as follows : 1. The infundibular wall is composed of the epithelium, lamina propria, muscle layer(inner circular and outer longitudinal muscle), and serosa. The funnel lip is divided into the inner, and outer lip of the epithelium and muscle layer. 2. The epithelium of the funnel lip and most region of the cranial part of the funnel are composed of ciliated columnar cells. In the surface and lateral part of the folds, ciliated cells and non-ciliated secretory cells tend to alternate in the epithelium of the caudal funnel and the necks, but are also found in groups of the simple cuboidal epithelium at the bases of the grooves between the ridges and tubular glands found in the subepithelium. 3. The secretory material of the non-ciliated secretory cills contains PAS-positive and alcian blue-positive granules, and these materials show purple colour in the basic fuchsin-methylene blue stain. 4. The cells of the glandular groove and tubular gland of the neck portion of the oviduct mostly show weak PAS-positive, and alcian blue stain negative reaction. The tubular gland cells of the infndibulum contain pink of purple colour granules, and without reaction in the anterior neck portion of the infundibulum in basic fuchsin and methylene blue stain.

• 환경생물
• /
• 제37권3호
• /
• pp.396-405
• /
• 2019

A new species of free-living marine nematode is described from intertidal sediments of the East Sea, Korea. Phanoderma koreense sp. nov. is characterized by the presence of well-developed pharyngeal and cephalic capsule, six inner labial sensilla present as minute papillae around with circular groove, long and slender spicules with 4-5 serrated distal end, located at the base of the precloacal supplement, a series of eight to nine stout and short setae on the ventral cloacal region and conico-cylindrical tail with two pairs of blunt setae. In this study, we provide taxonomic descriptions and illustrations of a new species by differential interference contrast microscope and a pictorial key to the valid species of Phanoderma Bastian, 1865. This is the first record of the genus Phanoderma in the East Sea, Korea.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권1호
• /
• pp.18-24
• /
• 2013

Purpose: This study is performed to determine the effects of titanium cap with various sizes of pores on bone formation during guided bone regeneration (GBR). Methods: Calvaria from 10 adult male rabbits were chosen as the recipient sites. A trephine bur with a diameter of 10 mm was used to form one round groove on each side of sagittal suture of the cranium, and a round bur with a diameter of 1.5 mm was used to form 6 small holes on the inner circles of round grooves to induce bleeding. In the control group, bone graft was not conducted, and closed titanium cap was fixed in the round groove. Bone graft was not performed in groups 1 and 2, but fixed on titanium caps with 0.2 mm, and 0.5 mm sized pores, respectively. For groups 3, 4, and 5, a synthetic bone graft material (${\beta}$-tricalcium phosphate, Cerasorb$^{(R)}$, Germany) was transplanted, and titanium caps without pore, with 0.2 mm and 0.5 mm sized pore were fixed, respectively. The animals were sacrificed 4 weeks after, and clinical, radiographical, and histomorphometrical evaluation of bone regeneration was performed. Results: In all groups, there were no clinical signs of infection, inflammation or wound dehiscence. Radiographic evaluation revealed well-defined semi-circular radiopacity inside the titanium cap of groups 3, 4, and 5. Histologically, the inner surface of the hemisphere was evenly lined with newly formed bone tissue, as well as grafted bone material in the group 3. In groups 4 and 5, the insertion of connective tissue was observed along the inner surface. However, the overall surface area between the grafts with different holes yielded no statistical significance in the histomorphometrical evaluation. Conclusion: Although the total area of newly formed bone showed no significant difference, excellent bone formation tendency was observed histologically when closed caps were used with bone graft was accompanied.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.33-40
• /
• 2021

Current industrial flow is directed toward reducing the usage of raw materials by reusing parts, which is referred to as a circular economy (CE). Repair is one of the most value-added approaches in CE, which can be efficiently accomplished via additive manufacturing. The repair technology of metallic parts via the directed energy deposition process, which includes the selective removal and redeposition of damaged regions of metallic parts. Residual stress characteristics depend on the shape of the part and the shape of the redeposition region. The objective of this study is to investigate the effects of the radius and corner position of the substrate on the residual stresses for repair by using finite element analysis (FEA). The residual stress distribution of the 45° angle groove at the edge of the circular shape models on the outer and inner radii was analytically investigated. The analysis was accomplished using SYSWELD software by applying a moving heat source with defined material properties and cooling conditions integrated into the FEA model. The results showed a similar pattern of concentrated stress distribution for all models except the 40-mm and 60-mm radii, for which the maximum stress locations were different. The maximum residual stresses are high but lower than the yield strength, suggesting the absence of cracks and fractures due to residual stresses.

• 대한기계학회논문집B
• /
• 제40권11호
• /
• pp.755-759
• /
• 2016

전자 통신 분야에서 히트파이프를 활용한 방열기술은 점차 늘어나고 있다. 특히 전자 패키지 응용에서는 원형 단면 히트파이프에 비해 평판 형상의 얇은 히트파이프가 보다 더 적용하기에 용이하다. 압출 공정에 기반한 평판 히트파이프는 내벽에 사각 단면 그루브들로 이루어진 단순한 모세관 윅 구조를 갖는다. 그루브 윅이 내벽에 다수 개 설치가 된다고 하더라도 상대적으로 높은 모세관력을 달성하기는 어렵다. 본 연구에서는 그루브 윅의 모세관력 향상을 위해 와이어 다발을 적용한 평판 히트파이프의 제작 및 성능평가 실험을 수행하였다. 실험을 통해 와이어 다발을 윅으로 갖는 평판 히트파이프의 열저항 및 열전달률이 그루브 윅 평판 히트파이프에 비해 각각 3.4배와 3.8배 가량 우수한 것으로 나타났다. 본 연구를 통해 와이어 다발을 통한 모세관력 향상 효과를 실험적으로 확인하였으며, 향후 상용화를 위한 연구를 진행할 계획이다.