• 대한수의학회지
• /
• 제40권1호
• /
• pp.35-41
• /
• 2000

We established a new method to analyze abamectin using HPTLC (high performance thin layer chromatography) in order to obtain its pharmacokinetic profiles in pigs. Recovery of abamectin in pig serum after fluorescence derivatization was $80.01{\pm}3.82%$ at 0.1ppm and $83.67{\pm}3.63%$ at 10ppm, respectively. Detection reproducibility in terms of coefficient variation (c.v.) was 3.09% and 2.74% (intra-day), and 3.71% and 51.7%(inter-day), for 0.1 and 10ppm, respectively. Pharmacokinetics of abamectin was studied in five Yorkshire-Landrace mixed bred male pigs ($35.0{\pm}2.7kg$) administered intramuscularly 0.3mg/kg b.w. Pharmacokinetic profiles of abamectin in pigs were described by the 1-compartment open model with first-order absorption and first-order elimination. AUC (area under the curve) was $262.65{\pm}16.44ng{\cdot}day/ml$ and the biological elimination half-life ($t_{1/2},\;k_e$) was $5.28{\pm}0.84$ days, indicating somewhat high bioavailability and long half-life by the intramuscular route. We suggest intramucular injection of abamectin could be also used in place of the recommended route of its subcutaneous administration so far.

• 약학회지
• /
• 제45권1호
• /
• pp.71-77
• /
• 2001

We recently developed a high efficiency expression vectors pCK, which drives a high level of gene expression in the skeletal muscles of mice. In this study, we investigated the pharmacokinetics and biodistribution of pCK-VEGF expressing human VEGF165 after intravenous or intramuscular administration. The quantity of pCK-VEGF in the tissues of mice was measured by the PCR method which has a detection limit of approximately 1 pg of the exogenously added plasmid. In the case of intravenous administration, the half life of the pCK-VEGF plasmid in the bloodstream was 1.68 min. After intra-muscular administration, the half life of pCK-VEGF plasmid in the bloodstream was 6.78 min. At 90 min post-administration, 30% of the injected pCK-VEGF was found at the site of injection, where it persisted for up to 8 hours. Less than 1.6% of the injected pCK-VEGF plasmid DNA was detected in highly vascularized tissues such as the lung, kidney; and liver at 90 min post-administration, but the plasmid was undetectable at later time points. These results suggested that intramuscularly administrated pCK-VEGF persisted for longer periods of time in muscles than in other tissues and that direct intra-muscular injection of pCK-VEGF might be useful for local therapeutic angiogenesis.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2173-2181
• /
• 2016

Permanent magnet synchronous motors (PMSMs) have higher torque and superior output power per volume than other types of AC motors. They are commonly used for applications that require a large output power and a wide range of speed. For precise control of PMSMs, knowing the accurate position of the rotor is essential, and normally position sensors such as a resolver or an encoder are employed. On the other hand, the position sensors make the driving system expensive and unstable if the attached sensor malfunctions. Therefore, sensorless algorithms are widely researched nowadays, to reduce the cost and cope with sensor failure. This paper proposes a sensorless algorithm that can be applied to a wide range of speed. The proposed method features a robust operation at low-speed as well as high-speed ranges by employing a gain adjustment scheme and intermittent voltage pulse injection method. In the proposed scheme the position estimation gain is tuned by a closed loop manner to have stable operation in tough driving environment. The proposed algorithm is fully verified by various experiments done with a 1 kW outer rotor-type PMSM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.75-78
• /
• 2007

To detect partial discharge of 154kV joint box, we have made experiment by using the HFCT sensor. Generally the signals which are detected in partial discharge test of underground power transmission cable are accompanied with both noises of high voltage and noises of surrounding power cable. The most noise in near to end part of joint box is corona, beside other noises flowed from surrounding area. Partial discharge test is difficulty due to these noises. First, we test reliability on both injection of calibration signal in NJB and removal of low frequency. After that, we had analyzed frequencies by measuring signals in IJB with 300[m] distance from NJB. Also we had measured S/N ratio by using the indirected injection method of calibration signal in IJB. In this experiment, two measurement methods were difference of detection acquisition, but these had the equal frequency properties.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.800-812
• /
• 2012

This paper analyses the mathematical model and control strategies of a Hybrid Active Power Filter with Injection Circuit (IHAPF). The control strategy based on the load harmonic current detection is selected. A novel control method for a IHAPF, which is based on the analyzed control mathematical model, is proposed. It consists of two closed-control loops. The upper closed-control loop consists of a single fuzzy logic controller and the IHAPF model, while the lower closed-control loop is composed of an Adaptive Network based Fuzzy Inference System (ANFIS) controller, a Neural Generalized Predictive (NGP) regulator and the IHAPF model. The purpose of the lower closed-control loop is to improve the performance of the upper closed-control loop. When compared to other control methods, the simulation and experimental results show that the proposed control method has the advantages of a shorter response time, good online control and very effective harmonics reduction.

• 분석과학
• /
• 제14권6호
• /
• pp.471-475
• /
• 2001

$85{\mu}m$-polyacrylate(PA) 와 $100{\mu}m$-polydimethylsiloxane(PDMS) fiber를 사용하여 물증의 DBCP와 n-butylbenzene을 추출한 후 GC-MS로 분석하는 방법을 연구하였다. SPME 과정에 영향을 미치는 인자들, 즉 추출 시간, 주입 길이, 주입 온도, 탈착 시간 및 탈착 온도들에 대한 최적화 조건을 조사하였다. 검량선의 직선성(correlation coefficient, R)은 0.99 이상이었으며, 본 분석법의 검출한계는 1.5 와 $10.8{\mu}g/L$ 이었고, 분석법의 재현성은 RSD 10.4와 14.4 % 였다.

• 대한핵의학회지
• /
• 제37권1호
• /
• pp.24-33
• /
• 2003

Finding epileptogenic zone is the most important step for the successful epilepsy surgery. F-18 fluorodeoxyglucose positron emission tomography (FDG-PET) and single photon emission computed tomography (SPECT) can be used in the localization of epileptogenic foci. In medial temporal lobe epilepsy, the diagnostic sensitivity of FDG-PET and ictal SPECT is excellent. However, detection of hippocampal sclerosis by MRI is so certain that use of FDG-PET and ictal SPECT in medial temporal lobe epilepsy is limited for some occasions. In neocortical epilepsy, the sensitivities of FDG-PET or ictal SPECT are fair. However, FDG-PET and ictal SPECT can have a crucial role in the localization of epileptogenic foci for non-lesional neocortical epilepsy. Interpretation of FDG-PET has been recently advanced by voxel-based analysis and automatic volume of interest analysis based on a population template. Both analytical methods can aid the objective diagnosis of epileptogenic foci. Ictal SPECT was analyzed using subtraction methods and voxel-based analysis. Rapidity of injection of tracers, ictal EEG findings during injection of tracer, and repeated ictal SPECT were important technical issues of ictal SPECT. SPECT can also be used in the evaluation of validity of Wada test.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.59-62
• /
• 1993

Spectrophotometric determination of some heavy lanthanide ions by flow injection method is described. Xylenol Orange forms water soluble chelates with lanthanide ions in a tris[hydroxymethyl]-aminomethane-buffered medium having pH 8.3 and containing cetyltrimethylammonium bromide. The molar absorptivities of Ln(III)-XO complexes were increased by the ternary system with cetyltrimethylammonium bromide with the concomitant bathochromic shift of absorption maxium compared to those of the binary system without cetyltrimethylammonium bromide. The calibration curves are linear in the range 0.25-1.00 ppm for Gd(III), Dy(III), Er(III), Tm(III) and Yb(III) and the dynamic range are very wide. The detection limits (S/N=2) are from 2 ppb for Gd(III) to 30 ppb for Yb(III) and the relative standard deviations are from 1.2% for 0.5 ppm Gd(III) to 1.8% for 0.5 ppm Yb(III). The sample throughput was ca. 50 $h^{-1}$.

• Geomechanics and Engineering
• /
• 제24권1호
• /
• pp.1-14
• /
• 2021

In this study, a new approach using electrical resistivity measurement was proposed to detect grout penetration and to evaluate the grouting performance for such as waterproof efficiency in single rock fracture. For this purpose, an electrical resistivity monitoring system was designed to collect multi-channel data in real time. This was applied to a system for grout injection/penetration using a transparent fracture replica with various aperture sizes and water-cement mix ratio. The electrical resistivity was measured under various grout penetration conditions in real time, which results were directly compared to the visual observation images of grout penetration/distribution. Moreover, the grouting success status after the curing process was evaluated by measuring the electrical resistivity in relation to changes in frequency in fracture cells where grout injection and penetration were completed. Consequently, it was determined that the electrical resistivity monitoring system could be applied effectively to the detection of successful penetration of grouting into a target area and to actual field evaluation of the grouting performance and long-term stability of underground rock structures.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권3호
• /
• pp.1-10
• /
• 2022

Most wells developed in Jeju island before the enactment of the Groundwater Management Ordinance in 2002 are vulnerable to aquifer contamination due to inflow of upper groundwater having the high concentration of nitrate nitrogen, likely due to incomplete grouting in upper section of the wells. Although these wells require entire reinstallation, it is often necessary to rehabilitate the existing wells due to various constraints. Therefore, to identified the inflow section of contaminants, the thermal level sensor (TLS) technique was firstly applied for three wells, which enables to monitor temperature variations in every 50 cm depth. Then, the grouting material was injected to the upper section to prevent the inflow of upper contaminated groundwater into the entire aquifer. By applying TLS technique, it was found that the temperature deviations in the upper groundwater inflow section decreased sharply. Moreover, both the change in the concentration of nitrate nitrogen in the rainy/dry seasons and the average concentrations were found to decrease rapidly after grouting material injection. Consequently, the application of TLS proposed in the study turned out to be appropriate to prevent aquifer contamination.