• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.42-49
• /
• 1979

In order to evaluate the utility of the anthocyanins of Amaranthys tricolor L. as an edible pigment, the present study was undertaken to investigate the effects of pH. temperature, ascorbic acid, sugars and their degradation products, quercetin, thiourea, sodium pyrophosphate and metal ions on the stability of the anthocyanins in the model systems. The results obtained from this study were as follows. 1. The degradation of total anthocyanins was retarded as the pH levels decreased from 8.0 to 1.0. At pH 1.0, however. the initial degradation reaction proceeded faster than at pH 2.0 to 3.0 2. On heating in buffered aqueous solution at $80^{\circ}C$, the total anthocyanin content was higher at pH 2.0 than other pH levels. Increasing the storage temperature accelerated greatly the pigment degradation. In darkness at $40^{\circ}C$, after 10 days, only 19% of the original amount was left, while at $2^{\circ}C$, under the same conditions of storage, approximately 90% of the pigment was retained. The half-life of the pigment, 63.0 days at $2^{\circ}C$, shortened to 1. 7 days at $40^{\circ}C$. 3. An increase in ascorbic arid concentration from 0. 15 to 0.50 mg/ml lowered the anthocyanin retention. 4. There was no significant difference between glucose and fructose in anthocyanin degradation effect. Furfural was more effective than other sugar degradation products, formic acid or levulinic acid in accelerating anthocyanin breakdown. 5. Neither quercetin nor sodium pyrophosphate had a protective effect on the anthocyanins in the presence of ascorbic acid, while, in the systems 0.5 or 1 mg/ml of thiourea with $150{\;}{\mu}g/ml$ of ascorbic acid, the loss of anthocyanins was significantly reduced. 6. Both mercuric and cupric ions in 30 ppm greatly accelerated anthocyanin degradation.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.259-267
• /
• 2010

The catalytic wet oxidations of the wastewater containing azo dye Reactive Black 5(RB5) with heterogeneous catalyst of CuO have been carried out to investigate the effects of temperature($190{\sim}230^{\circ}C$) and catalyst concentration(0.00~0.20 g/l) on the removals of colour and total organic carbon TOC. The wastewater colour was measured with spectrophotometer, and the oxidation rate was estimated with TOC. About 90% of colour was removed during 120 min in thermal degradation of the RB5 wastewater at $230^{\circ}C$, while TOC was not removed at all. As increasing reaction temperature and catalyst concentration, the removal rates of colour and TOC increased in the catalytic wet oxidations of RB5 wastewater. The effects of catalyst were already considerable even at 0.01 g CuO/l, while the removal rates of colour and TOC increased negligibly with increasing the catalyst concentration above 0.05 g CuO/l. The initial destruction rates of the wastewater colour have shown the first-order kinetics with respect to the wastewater colour. TOC changes during catalytic wet oxidations have been well described with the global model, in which the easily degradable TOC was distinguished from non-degradable TOC of the wastewater. The impacts of reaction temperature on the destruction rate of the wastewater colour and TOC could be described with Arrhenius relationship. Activation energies of the colour removal reaction in thermal degradation, wet oxidation, and catalytic wet oxidation(0.20 g CuO/l) of the RB5 wastewater were 108.4, 78.3 and 74.1 kJ/mol, respectively. The selectivity of wastewater TOC into the non-degradable intermediates relative to the end products in the catalytic wet oxidations of RB5 wastewater was higher compared to that in phenol wet oxidations.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.86-96
• /
• 2006

Ecoclimap-1, a new complete surface parameter global database at a 1-km resolution, was previously presented. It is intended to be used to initialize the soil-vegetation- atmosphere transfer schemes in meteorological and climate models. Surface parameters in the Ecoclimap-1 database are provided in the form of a per-class value by an ecoclimatic base map from a simple merging of land cover and climate maps. The principal objective of this ecoclimatic map is to consider intra-class variability of life cycle that the usual land cover map cannot describe. Although the ecoclimatic map considering land cover and climate is used, the intra-class variability was still too high inside some classes. In this study, a new strategy is defined; the idea is to use the information contained in S10 NDVI SPOT/VEGETATION profiles to split a land cover into more homogeneous sub-classes. This utilizes an intra-class unsupervised sub-clustering methodology instead of simple merging. This study was performed to provide a new ecolimatic map over Northeast Asia in the framework of Ecoclimap-2 global database construction for surface parameters. We used the University of Maryland's 1km Global Land Cover Database (UMD) and a climate map to determine the initial number of clusters for intra-class sub-clustering. An unsupervised classification process using six years of NDVI profiles allows the discrimination of different behavior for each land cover class. We checked the spatial coherence of the classes and, if necessary, carried out an aggregation step of the clusters having a similar NDVI time series profile. From the mapping system, 29 ecosystems resulted for the study area. In terms of climate-related studies, this new ecosystem map may be useful as a base map to construct an Ecoclimap-2 database and to improve the surface climatology quality in the climate model.

• Childhood Kidney Diseases
• /
• v.10 no.1
• /
• pp.27-32
• /
• 2006

Purpose : Conservative management of multicystic dysplastic kidney(MCDK) without nephrectomy has recently been advocated. The purpose of this study was to determine the clinical course of conservatively managed MCDK and to find out possible predictive factors for involution of MCDK by ultrasonography(US). Methods : A retrospective analysis was made on 45 patients(26 boys and 20 girls) in whom MCDK was detected and had been traced by US between Dec. 1993 and Aug. 2005 at Severance Hospital. Results : Median follow-up time was 30 months(range 2-102 months). All patients under-went radionuclide scans and voiding eystourethrograms. The serial follow-up US showed complete involution in 11(24%), partial involution in 19(41%), and no interval change or increased in cyst size in 13(28%) patients. Nephrectomy was done in 3 patients(7%) due to relapsing urinary tract infection(UTI) and severe abdominal distension. The mean age of complete involution of MCDK was 37 months(range 12-84 months). Episodes of UTI were present in 17 patients(37%) and additional genitourinary(GU) abnormalities were found in 22 patients(44%). Hypertension and renal insufficiency was complicated in one patient. No child developed malignant tumor. Univariate analysis showed that five variables were associated with complete involution of the MCDK; gender, site, UTI episode, additional GU abnormalities, and renal length on initial US. After adjusting using the Pearson model, the presence of additional GU abnormalities was exclusively associated with complete involution among the 5 variables(P=0.034). Conclusion : In our review of 46 cases of MCDK, non-surgical approach for patients with MCDK was advisable and we could predict poor prognosis when MCDK is associated with other GU anomalies.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.507-512
• /
• 2017

There has been increasing concern regarding misuse of disinfectants and sanitizers such as ethanol, sodium hypochlorite, and hydrogen peroxide for food contact surfaces in the food industry. Examining the efficacy of the concentration of currently used disinfectants and sanitizers is urgently required in the Korean society. This study aimed to develop predictive reduction models for Escherichia coli and Staphylococcus aureus in suspension, as a function of $ClO_2$ (chlorine dioxide) and contact time using response surface methodology. E. coli ATCC 10536 and S. aureus ATCC 6538 (initial inoculum, 8-9 log CFU/mL) in tryptic soy broth were treated with different concentrations of $ClO_2$ (5, 20, and 35 ppm) for different contact times (1, 3, and 5 min) following a central composite design. The polynomial reduction models for $ClO_2$ on E. coli and S. aureus were developed under the clean condition. E. coli reduction by 35 ppm $ClO_2$ for 1, 3, and 5 min was 2.49, 2.70, and 3.65 log CFU/mL, respectively. Also, S. aureus reduction by 35 ppm $ClO_2$ for 1, 3, and 5 min was 4.59, 5.25, and 5.81 log CFU/mL, respectively. The predictive response polynomial models developed were $R=0.43231-0.056492^*X_1-0.097771^*X_2+9.24167E-003^*X_1^*X_2+3.06333E-003^*X_1{^2}$ ($R^2=0.98$) on E. coli and $R=1.10542-0.20896^*X_1-0.046062^*X_2+8.30000E-003^*X_1^*X_2+8.73300E-003^*X_1{^2}$ ($R^2=0.99$) on S. aureus, where R was the bacterial reduction (log CFU/mL), $X_1$ was the concentration and $X_2$ was the contact time. Our predictive reduction models should be validated in developing the optimal concentration and contact time of $ClO_2$ for inhibiting E. coli and S. aureus on food contact surfaces.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.77-83
• /
• 2016

The measurement of total fresh weight of plants provides an essential indicator of crop growth for monitoring production. To measure fresh weight without damaging the vegetation, image-based methods have been developed, but they have limitations. In addition, the total plant fresh weight is difficult to measure directly in hydroponic cultivation systems because of the amount of nutrient solution. This study aimed to develop a real-time, precise method to measure the total fresh weight of Romaine lettuce (Lactuca sativa L. cv. Asia Heuk Romaine) with growth stage in a plant factory using a nutrient film technique. The total weight of the channel, amount of residual nutrient solution in the channel, and fresh shoot and root weights of the plants were measured every 7 days after transplanting. The initial weight of the channel during nutrient solution supply (Wi) and its weight change per second just after the nutrient solution supply stopped were also measured. When no more draining occurred, the final weight of the channel (Ws) and the amount of residual nutrient solution in the channel were measured. The time constant (${\tau}$) was calculated by considering the transient values of Wi and Ws. The relationship of Wi, Ws, ${\tau}$, and fresh weight was quantitatively analyzed. After the nutrient solution supply stopped, the change in the channel weight exponentially decreased. The nutrient solution in the channel slowly drained as the root weight in the channel increased. Large differences were observed between the actual fresh weight of the plant and the predicted value because the channel included residual nutrient solution. These differences were difficult to predict with growth stage but a model with the time constant showed the highest accuracy. The real-time fresh weight could be calculated from Wi, Ws, and ${\tau}$ with growth stage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Journal of Nutrition and Health
• /
• v.52 no.4
• /
• pp.342-353
• /
• 2019

Purpose: The Dietary Reference Intakes for Koreans (KDRIs) suggest that the goal for the intake of sodium should be less than 2,000 mg, which is thought to be infeasible to achieve when eating the typical Korean diet. This study aimed to obtain the new intake goals for sodium with improved feasibility to achieve, and also to design optimized food intake patterns for Korean adults by performing linear programming. Methods: The data from a one day 24-hour dietary recall of the 2010 ~ 2014 Korea National Health and Nutrition Survey were used to quantify food items that Korean adults usually consumed. These food items were categorized into seven groups and 24 subgroups. The mean intakes and intake distributions of the food groups and the food subgroups were calculated for eight age (19 ~ 29, 30 ~ 49, 50 ~ 64, and over 65 years old) and gender (male and female) groups. A linear programming model was constructed to minimize the difference between the optimized intakes and the mean intakes of the food subgroups while meeting KDRIs for energy and 13 nutrients, and not exceeding the typical quantities of each of the food subgroups consumed by the respective age and gender groups. As an initial solution of the linear programming, the optimized intake of seasonings, including salt, was calculated as 0 g for all the age and gender groups when the sodium constraint was inserted not to exceed 2,000 mg. Therefore, the sodium constraint was progressively increased by 100 mg until the optimized intake of seasoning was obtained as the values closest to the $25^{th}$ percentile of the intake distribution of seasonings for the respective age and gender groups. Results: The optimized food intake patterns were mathematically obtained by performing linear programming when the sodium constraint values were 3,600 mg, 4,500 mg, 4,200 mg, 3,400 mg, 2,800 mg, 3,100 mg, 3,100 mg, and 2,500 mg for the eight age and gender groups. Conclusion: The optimized food intake patterns for Korean adults were designed by performing linear programming after increasing the sodium constraint values from 2,000 mg to 2500 ~ 4,500 mg according to the age and gender groups. The resulting patterns suggest that current diets should be modified to increase the intake of vegetables for all the groups, milk/dairy products for the female groups, and fruits for the female groups except for the females aged 50 ~ 64 years.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Korean Journal of School Psychology
• /
• v.17 no.3
• /
• pp.401-419
• /
• 2020

The purpose of this study was to validate the Korean Implementation Fidelity Checklist of Tier 1 School-Wide Positive Behavior Support (KIFC-T1) for use in the Korean educational system. Tier 1 support, which is universal supports, within a multi-tiered, school-wide positive behavior support (SWPBS) model, aims to provide support to and prevent problem behaviors among all students in a school. The initial KIFC-T1 consisted of 48 items and 11 factors and was developed based on a literature review. Its content was validated by experts. The validated KIFC-T1 was introduced to 185 special school teachers who had experience implementing SWPBS and who used the instrument to assess the degree to which their schools had implemented Tier 1 support. Based on their responses, the construct validity of the KIFC-T1 was examined using factor, item, and internal consistency reliability analyses. The concurrent validity of the tool was examined using the PBS Evaluation Tool, School Climate Questionnaire, School Discipline Practice Scale, and PBS Effectiveness Scale. The analyses revealed that KIFC-T1 had a stable five-factor structure with 35 items, had good reliability (Cronbach's α=.956, each factor's Cronbach's α=.834-.951), and its results were statistically significantly correlated with those of the PBS Evaluation Tool, School Discipline Practice Scale, and the PBS Effectiveness Scale. However the KIFC-T1's results were not statistically significantly correlated with the results of the School Climate Questionnaire. These results suggest that KIFC-T1 is a reliable and valid tool for assessing the fidelity of universal support implementations.