• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.733-742
• /
• 2007

A data stream is a massive unbounded sequence of data elements continuously generated at a rapid rate. Due to this reason, memory usage for data stream analysis should be confined finitely although new data elements are continuously generated in a data stream. To satisfy this requirement, data stream processing sacrifices the correctness of its analysis result by allowing some errors. The old distribution statistics are diminished by a predefined decay rate as time goes by, so that the effect of the obsolete information on the current result of clustering can be eliminated without maintaining any data element physically. This paper proposes a grid based clustering algorithm for a data stream. Given a set of initial grid cells, the dense range of a grid cell is recursively partitioned into a smaller cell based on the distribution statistics of data elements by a top down manner until the smallest cell, called a unit cell, is identified. Since only the distribution statistics of data elements are maintained by dynamically partitioned grid cells, the clusters of a data stream can be effectively found without maintaining the data elements physically. Furthermore, the memory usage of the proposed algorithm is adjusted adaptively to the size of confined memory space by flexibly resizing the size of a unit cell. As a result, the confined memory space can be fully utilized to generate the result of clustering as accurately as possible. The proposed algorithm is analyzed by a series of experiments to identify its various characteristics

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.117-122
• /
• 2013

This research was carried out to clarify the germination characteristics with reference to hard seed coat in safflower. Morphologically, seed coat surface has hilum and micropyle which were evident during seed development stage. In the flower of developing seeds, the hilum area is connected with placenta of maternal tissue while the micropyle area is connected with the style of pistil. When the seeds imbibed, the hilum surface began to crack and the embryo protrudes through the hilum. To investigate the route for moisture absorption and gas exchange on the seed coat, the hilum and the micropyle were artificially sealed by paraffin. The seeds whose hilum were sealed could not germinate, which indicates that the exchange of moisture and oxygen takes place through hilum in safflower seeds. The germination was tested at $15^{\circ}C$, $20^{\circ}C$, and $25^{\circ}C$ by three substrates with different moisture conditions; top of paper method (hilum submerged in water), between-paper method, and soil seeding. The germination percentages were 31.3% at $15^{\circ}C$, 15.7% at $20^{\circ}C$ and 6.0% at $25^{\circ}C$ in the top of paper method; and 45.5% at $15^{\circ}C$, 30.0% at $20^{\circ}C$ and 14.0% at $25^{\circ}C$ in the between-paper method; and 80.0% at $15^{\circ}C$, 77.0% at $20^{\circ}C$ and 78.0% at $25^{\circ}C$ in the soil seeding, respectively. When the internal structure of hilum was investigated through SEM, it was found out consisting of vascular bundle element. In conclusion, the hilum of safflower seed was closely related with water absorption and gas exchange during initial germination process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.195-202
• /
• 2004

The shell due to the effect of initial normal pressures on the shell surface was based on the assumption that the directions of the pressures are always normal to the undeformed shell surface, and that the change in the surface area of the shell is negligible. But the fact that the pressure are always normal to the deforming surface leads "follower force". The follower effect in the analysis can significantly alter the solution for natural frequency and buckling load as compared to the case when the direction of the pressures are assumed to be normal to the uniform shell surface. The expression for the part of strain energy contribution from normal pressure due to the effect of follower force was derived and added to the element stiffness matrix of axisymmetric shell. In the case of increasing external pressure, the natural frequencies decrease until one of them reaches zero. Theoretically the smallest applied load that reduces the frequency of any mode to zero, will have same magnitude as that of the buckling load. In order to determine the bucking load of the shell a few sets of frequencies are computed and the results considering the follower effects are well with the exact solution while the case without that are quite different. But in case of hemispherical dome, there are little difference in buckling pressure between with and without the effect of follower force.

• Korean Journal of Comparative Education
• /
• v.23 no.5
• /
• pp.53-75
• /
• 2013

This article explores the impact of mergers on the experiences of students. A case design is used to gain an in-depth understanding of the students in a Korean university that was combined with a two-year college in 2007. Semi-structured interviews of 11 direct entrants, 5 transfer students, and 7 professors were conducted in 2010 for the data collection. The results suggest that mergers do not necessarily ensure the integration of the students involved. Since mergers pose enormous challenges to both transfer students and direct entrants, university leaders need to give careful attention to students' persistence and integration as the campus changes. The results also reveal that students' experience of mergers may be affected by cultural backgrounds as well as the hierarchical structure of higher education. In Korean society, where credentialism prevails, mergers can have different impacts on students who come from initial institutions of differing perceived quality, and thus mergers may incite tension among the students. In light of these concerns, this study's findings highlight the importance of student integration as a key element in mergers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.18-23
• /
• 2018

FPSO consists of topside modularized plants for production of crude oil, and hullside structures that serve as support for the topside and storage of produced crude oil. The structural behavior of the FPSO topside module and its supporting hull depends on the interface structure that connects them, and the interface structure consists of a combination of individual unit support structures called Module Support Seat (MSS). Types of interface structures are various and, accordingly, the basic design of the FPSO topside module structure is greatly influenced, so various design methods should be considered from the initial design phase. Structural design of FPSO topside module requires consideration of the number of MSSs, connection type, and structural analysis options such as the range of finite element models, load conditions, and boundary conditions for verification of structural strength. In this study, the comparison combination cases for the above considerations were derived and the strength evaluation was performed, and the structural behavior characteristics of the topside module were compared and analyzed through a detailed review of the analysis results. The results of this study are considered to be a good reference for designing a more reliable topside module structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.83-94
• /
• 2019

Recently, the importance of Total Life Cycle System Management (TLCSM) and LIFE-CYCLE COSTS management is increasing in the development of weapon systems. In cost management, cost forecasting is important from the initial development stage, but it is difficult to predict the total life cycle cost at the development stage. In this study, we propose efficient management cost calculation and management at the development stage of the weapon system by comparison analysis between the PRICE-HL model and NemoSIM to calculate the maintenance cost under the CAIV concept. Based on the study results, further in-depth analyzes of the PRICE-HL model and NemoSIM input values / results are performed. In addition, we provide a more accurate method of calculating the cost of maintaining and operating the weapon system and a plan to utilize the result of NemoSIM in the ILS element development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.175-181
• /
• 2019

In the case of a conventional single stage decompression regulator used for large depressurization in the hydrogen fuel cell system of a fuel cell electric vehicle (FCEV), problems can arise, such as pulsation, slow response, hydrogen brittleness, leakage, high weight, and high cost due to high decompression. Most of these problems can be overcome easily using two decompression mechanisms (two-stage structures). In addition, a wide outlet-pressure control range can be secured if an electronic solenoid is applied to the second decompression. Accordingly, it is necessary to improve the precision of the outlet pressure of a two-stage pressure-reducing regulator and develop techniques, such as leakage prevention, durability, light weight, and price reduction. Therefore, to improve the outlet pressure accuracy and prevent leakage, the structural part before and after decompression to improve the air tightness were divided and the analysis was carried out assuming that the valve part was closed (open ratio: 0%) after each initial internal pressure application.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.8
• /
• pp.117-128
• /
• 2018

The central of Ulsan was formed and has been developed in alluvial plains the Riverfront of Taehwa River and Dongcheon River Fortresses including Gyebyeonseong of the late Silla, Chisoseong of the Goryeo, Ulsan Gyeonsangjwabyeongyeongseong, Ulsaneupseong, Ulsanwaeseong and Yeompoyeongseong as well as Gugangseowon and Old Ulsanhyanggyo and other facilities well display such fact. In the southern areas of Taehwa River, Byeokpajeong of Samsan, Buddhist temples and pavilion architectures used to be located. In its upstream areas, Eonyangeupseong, Eonyanghyanggo, Banguseowon and Daegokcheon Petroglyph exist as well. As such, the Riverfront of Taehwa River are a central space where the civilization of Ulsan has grown and developed, and are regarded as a core scenic asset of Ulsan. However, the look and nature of Taehwa River changed significantly due to Ulsan irrigation project and the construction of modern bridges such as Ulsangyo and Ulsan railway bridge during the period of Japanese occupation. The old look of the area started to be ruined by water contaminations and developments of waterfront lands that resulted from the development of Ulsan Industrial Center in 1962. The water quality of Taehwa River has been improved as a result of allotting a huge budget and administrative powers before and after 1997, the year when Ulsan was elevated to a metropolitan city. However, the surrounding views around Taehwa River changed greatly due to various urban development projects including apartment complex constructions. This is because the development of the Riverfront started from a land utilization project, in which the construction of apartment complexes was included in the initial phase; as a result, the areas were changed to be private scenic assets for those apartments. Aware of such issue, this study aims to identify major scenic elements that were present in the period before such developments in the river's surrounding areas from literature and geography materials; and to reveal how various urban development projects that have been performed from the period of Japanese occupation have changed the scenic elements of Riverfront of Taehwa River. The purpose of this study is to identify qualitative and quantitative changes in scenic elements of the Riverfront of Taehwa River as well as the characteristics of the resulting changes in the surrounding scenery.

• MARITIME LAW REVIEW
• /
• v.29 no.2
• /
• pp.115-144
• /
• 2017

The impact of the global financial crisis, which began in the United States in 2007, had a major impact on the domestic shipping and shipbuilding industries. In this regard, the domestic shipyard has established an order-taking strategy in several ways as an alternative to lowering the amount of construction of commercial vessels due to deterioration of the shipping industry, and selected industrial sector was the offshore plant sector. However, the domestic shipyard has under performed the offshore plant in order to just increase sales and secure work without any risk analysis for EPC contracts. As a result, the shipyard has been charged more than the initial contract price with the offshore plant contractor, or the shipyard has become a legal issue requiring payment of liquidated damages due to delays in delivery of the product. The main legal disputes are caused by the thorough risk analysis and the inexperience of process control that can occur during offshore plant construction. and In particular, there is no sufficient review of the unequivocal provisions in the contract as an element of risk management. There is no human resource to review these contractual clauses. Therefore, this study identifies the existence of specific risks that could lead to delays in offshore plant construction, and examined the existence of any unequivocal clauses in contracts for offshore plant construction. and also discussed how the toxic clause applies to the actual parties and how the concrete risk factors in the construction contracts are transferred and expressed by referring to the interviews with the project manager of the domestic shipyard and the previous research. As a result, This paper examined the legal liability of the contracting parties regarding delayed delivery of the products due to the offshore plant construction contract. And to improve the domestic shipbuilding industry.

• Journal of the Korea Society for Simulation
• /
• v.30 no.2
• /
• pp.1-9
• /
• 2021

Many factors such as wind direction, wind strength, temperature, and obstacles affect a munition's trajectory. Since these factors eventually determines the probability of hit and the hitting point of a target, these factors should be considered to obtain reliable weapon effectiveness data. In this study, we propose the extension of the MSDL(Military Scenario Definition Language) to reflect these factors to improve the reliability of weapon effectiveness data. Based on the existing MSDL, which has been used to set the initial condition of a military simulation scenarios, the newly identified subelements are added in ScenarioID, Environment, Organizations, and Installations as a scenario schema. Also, DamageAssessment and DesignOfExperiments element are added to make weapon effectiveness data easily. The extended MSDL enables to automatically generate the simulation scenarios that reflect various factors which affect the probability of hit or kill. This extended MSDL is applied to an integrated simulation software of weapon systems, named AddSIM version 4.0 for generation of weapon effectiveness data.