• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.3397-3413
• /
• 2016

Considering that the layered cellular automata (LCA) are naturally fit for representing image data in various applications, a novel reverse iterative image encryption scheme based on LCA is proposed. Specifically, the plain image is set as the final configuration of an 8-layer CA, and some sequences derived from a random sequence are set as the pre-final configuration, which ensure that the same plain image will never be encrypted in the same way when encrypted many times. Then, this LCA is backward evolved by following some reversible two order rules, which are generated with the aid of a newly defined T-shaped neighborhood. The cipher image is obtained from the recovered initial configuration. Several analyses and experimental results show that the proposed scheme possesses a high security level and executive performance.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.1-9
• /
• 2007

A major concern for Autonomous Military Robot in the rough terrain is the problem of moving robot from an initial configuration to goal configuration. In this paper, We generate a local path to looking for the best route to move an goal configuration while avoiding known obstacle from world model, not violating the mobility constraints of robot. Trough a Simulator for Unmanned Autonomous Vehicle, We can simulate a traversability of unmanned autonomous vehicle based on steering, acceleration, braking command obtained from local path planning.

• Journal of Electrical Engineering and information Science
• /
• 제2권4호
• /
• pp.8-13
• /
• 1997

This paper describes a scalable systolic synchronous memory for digital signal processing and packet switching. The systolic synchronous memory consists of the 2-D array of small memory blocks which are fully pipelined and communicated in three directions with adjacent blocks. The maximum delay of a small memory block becomes the operation speed of the chip. The array configuration is scalable for the entire memory size requested by an application. it has the initial latency of N+3 cycles with NxN array configuration. We designed an experimental 200 MHz 4Kb static RAM chip with the 4x4 array configuration of 256 SRAM blocks. It was fabricated is 0.8$\mu\textrm{m}$ twin-well single-poly double-metal CMOS technology.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.490-491
• /
• 2004

Recently, sectionalizing switches have been coming to be operated by remote control through the distribution SCADA system. However, the problem of determining the optimal switching sequence is a combinatorial optimization problem, and is quite difficult to solve. Hence, it is imperative to develop practically applicable solution algorithms for this problem. Several efficient algorithms have been developed for finding approximate solutions to such problems. these algorithms create a new arbitral distribution system configuration from an initial configuration, and some of these algorithms do not show a load transfer sequence to reach the objective system.

• Smart Structures and Systems
• /
• 제30권3호
• /
• pp.239-243
• /
• 2022

We investigate the influence of nonlinear viscoelastic damping on the response of a cantilever sensor covered by piezoelectric layers in a symmetric or asymmetric configuration. We formulate an initial-boundary-value problem which consistently incorporates both geometric and material nonlinearities including the effect of viscoelastic damping which cannot be ignored for micro- and nano-mechanical sensor operation in a vacuum environment. We employ an asymptotic multiple-scales methodology to yield the system nonlinear frequency response near its primary resonance and employ a model-based estimation procedure to deduce the system damping backone curve from controlled experiments in vacuum. We discuss the effect of nonlinear damping on sensor applications for scanning probe microscopy.

• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.237-247
• /
• 2011

현수교의 초기평형상태를 결정하기 위한 개선된 초기부재력법을 제시한다. 먼저 현수교의 주케이블과 행어가 만나는 절점에서 힘의 평형조건을 이용하여 초기평형상태를 결정한 뒤, 이 때 계산된 주 케이블의 절점좌표와 각 케이블 부재의 무응력장을 입력 값으로 하여 초기부재력을 도입한 비선형 해석을 수행하였다. 일반적인 초기부재력법의 경우 각 단계에서 계산된 부재력을 통하여 케이블의 무응력장을 재산정하지만, 본 연구에서는 각 케이블 부재의 무응력장을 매 계산 단계에서 고정된 값으로 취한다. 2차원 및 3차원 현수교 모델에 공통적으로 적용할 수 있다. 수치예제 결과 값의 비교를 통하여 연구의 타당성을 검증하였다.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.12-20
• /
• 1999

In this paper, method for mapping a three-dimensional shape into the two-dimensional plane will be introduced. This method is referred to geometric modelling and means a transformation between the flat sheet and final surface. The initial blank shape represents the original configuration of the final shape formed into three dimensional surface. The initial constant constant area mapping hypothesis was used in this paper. This technique will be applied to the basic data for an interactive computer design capable of dealing with typical stamping process, including deep parts and complex shapes.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.36-42
• /
• 2005

In this paper, the optimal position of optical phase conjugator(OPC) excellently compensating distorted WDM channels with initial frequency chirp due to both chromatic dispersion and self phase modulation(SPM) is numerically investigated. Highly-nonlinear dispersion shifted fiber(HNL-DSF) is used as a nonlinear medium of OPC in order to widely compensate WDM signal band. It is confirmed that if the OPC position was shifted from mid-way of total transmission length dependence on the initial frequency chirp as well as modulation format and fiber dispersion coefficient, it is possible to cancel the performance degradation owing to the initial frequency chirp. Using proposed configuration, it is possible to remove all in-line dispersion compensator, reducing span losses and system costs in the long-haul broadband WDM systems.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.17-26
• /
• 1999

Vaporization, ignition and combustion of fuel droplets in tandem array are theoretically investigated to understand the droplet interactions in combustors. Including the effects of density variation in gas-phase, internal circulation and transient liquid heating, a numerical studies are performed by changing parameters such as initial droplet temperatures, initial droplet spacings, initial Reynolds numbers, surrounding gas temperatures, and activation energies of fuel vapors. Combustion regime maps classify the droplet combustion phenomena according to the configuration and location of the flame with respect to injection Reynolds numbers and surrounding gas temperatures. In addition, it is shown that the dynamic histories of droplets and ignition delay times are dependent on droplet size ratios and initial spacings of tandem droplets.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.277-289
• /
• 2005

본 논문은 강사장교의 극한강도를 다루고 있다. 강사장교의 극한강도를 평가하기 위하여 비선형 비탄성 해석 접근법과 분기점 좌굴 고유치해석 접근법인 유효접선탄성계수$(E_f)$법을 사용하여 예제를 수행하였다. 이를 위하여 초기형상을 고려한 실용적인 비선형 비탄성 해석기법을 제시하였다. 초기형상 해석 시각 형상해석 단계마다 보-기둥 부재의 부재력 대신 개선된 구조물형상을 고려하였다. 보-기둥 부재의 기하학적 비선형은 안정함수를 사용하여 고려하였고, 재료적 비선형은 CRC 접선계수와 포물선 함수를 사용하여 고려하였다. 또한, 케이블 부재의 기하학적 비선형은 할선탄성계수 값을 사용하여 고려하였다. 본 연구에서 제안한 해석기법으로 예측된 하중-변위 곡선들이 다른 연구에 의한 결과들과 비교 검증 되었으며, 제시된 3차원 강사장교 모델들에 대하여 제안한 해석기법과 비탄성 좌굴해석을 사용하여 극한강도를 비교하였다.