• Journal of Pharmaceutical Investigation
• /
• 제24권4호
• /
• pp.233-243
• /
• 1994

Precipitation was formed during the preparation of decoction from a mixture of Scutellariae Radix and Coptidis Rhizoma or Phellodendri Cortex according to the prescription of Hwang-ryean-hae-dog-tang. Baicalin and berberine were identified in coprecipitated product and these components were the active ingredients of two herbal medicine. The coprecipitated product was very slightly soluble in water and sparingly soluble in ethanol. The stoichiometric ratio of baicalin and berberine was found to be 1:1. The lipid-water partition coefficients of coprecipitated product were increased more than baicalin and berberine in chloroform, but were decreased in other organic solvents. The content of baicalin and berberine in coprecipitated product, determined by HPLC, were 23.08% and 26.75%, but the content of active ingredients in supernatant were 0.66% and 0.26%, respectively. The dissolution profile of baicalin of coprecipitated product was increased more than extract of Scutellariae Radix in artificial gastric juice, but was decreased in artificial intestinal juice. The dissolution rate of berberine of coprecipitated product was lower than extract of Coptidis Rhizoma in artificial gastric juice and intestinal juice commonly.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.339-346
• /
• 2021

본 연구에서는 더 나은 음식 주문 메커니즘을 제공하고 글로벌 고객의 맞춤형 음식 주문에 대한 레시피 성분 비율을 실시간으로 선택할 수 있는 인터페이스를 구현하였다. 각 레시피 재료의 기본 비율을 보여주는 주문 시스템 화면에 선택 메뉴를 배치하여 글로벌 고객에게 적절한 음식을 제공하고, 단순히 음식 메뉴를 선택하고 주문하는 시스템 없이 레시피 그래프를 구성하여 맞춤형 레시피 재료 구성 비율을 제공하는 알고리즘을 연구하였다. 상호 작용을 가능하게 하여 사용자가 음식 메뉴 주문 장치에서 다양한 레시피 재료의 비율 조정을 통해 맞춤형 서비스를 제공한다.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.174-180
• /
• 2017

Recently, the world faces the environmental problem such as air pollution due to harmful gas discharged from car and abnormal climate due to the green-house gases increased by the discharge of $CO_2$. Compressed Natural Gas (CNG), one of alternative for this problem, is less harmful, compared to the existing fossil fuel, as gaseous fuel, and less carbon in fuel ingredients and carbon dioxide generation rate relatively favorable more than the existing fuel. However, CNG fuel has the weakness of slow flame propagation speed and difficult fast burn. On the other hand, hydrogen does not include carbon in fuel ingredients, and does not discharge harmful gas such as CO and HC. Moreover, it has strength of quick burning velocity and ignition is possible with small ignition energy source and it's has wide Lean Flammability Limit. If using this hydrogen with CNG fuel, the characteristics of output and discharge gas is improved by the mixer's burning velocity improved, and, at the same time, is possible to have stable lean combustion with the reduction of $CO_2$ expected. Therefore, this research tries to identify the characteristics of engine and emission gas when mixing CNG fuel and hydrogen in each portion and burning them in spark igniting engine, and grasp the lean combustion limit and emission gas characteristics according and use it as the basic data of hydrogen-CNG premixed engine.

• 한국식품영양과학회지
• /
• 제26권5호
• /
• pp.878-885
• /
• 1997

Effect of various ingredients and cooling methods on the quality of modified Jeung-pyun(traditional Korean steamed rice cake) were studied. Three different kinds of wheat flours(strong, medium, and weak) were studied to evaluate the volume and firmness of Jeung-pyun. Weak flour showed the maximum volume and good sensory results. The optimum ratio of ingredients was flour : water ; sugar ; Tak-Ju=100 : 20 : 20 : 50 for steaned Jeung-pyun. When three different cooking methods were compared, the maximum volume showed from convection oven method, but the crust color of Jeung-pyun was like bread. Steaming method showed higher volume than that of product heated by microwave method. The optimum formula ratio for the microwave method was flour ; water ; sugar ; Tak-Ju = 100 : 30 : 20 : 50, which required 10% higher added water content than that of steaming. When wheat flour was used instead of rice flour, the addition of 5% normal corn starch increased volume of both steamed and microwave cooked products. In the case of added modified starches to Jeung-pyn, 5% $\alpha$-waxy corn starch showed the highest volume in steaming method. When rice flour was used, the addition of 5%$\alpha$-waxy corn starch also showed highest volume f both steamed and microwave cooked products. The firmness of steamed wheat flour Jeung-pyun, containing 5%$\alpha$-corn starch was higher firmness than that of control and other added samples. Microwave cooked products showed two or three times higher firmness of steaming products. The use of wrap(uni-wrap) and stabilizer(METHOCEL) decreased the firmness of microwave cooked wheat flour Jeung-pyun to 200~300g compared with that of untreated Jeung-pyun.

• 동아시아식생활학회지
• /
• 제16권6호
• /
• pp.747-752
• /
• 2006

This study developed gasiogapidduk to increase the functional value and flavor of traditional Baiksulgi by adding gasiogapi powder. Powdered nonglutinous rice was mixed with powdered leaves (1%, 2%, 3%), powdered stems roots (1%, 3%, 5%), and powdered freeze-dried root extracts (5%, 10%, 15%) of Acanthopanax senticosus, known as the second ginseng, in order to find the combination ratio optimal to the senses. Sensory evaluation and texture characteristic evaluation of gasiogapidduk were used to develop a functional rice cake appealing to the largest number of people. Sensory evaluation consisted of evaluating color, smell, taste and texture, preference quality which reflects overall appeal. Texture characteristics were evalauated on hardness, adhesiveness, cohesiveness, springiness and gumminess. As a result, AE5 mixed with 5% powdered freeze-dried Acanthopanax senticosus extract proved to be the most desirable in both sensory evaluation and texture characteristics.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.97-113
• /
• 2014

In the present work appropriate concrete material models have been proposed to predict drying shrinkage and specific creep of High-performance concrete (HPC) using Artificial Neural Network (ANN). The ANN models are trained, tested and validated using 106 different experimental measured set of data collected from different literatures. The developed models consist of 12 input parameters which include quantities of ingredients namely ordinary Portland cement, fly ash, silica fume, ground granulated blast-furnace slag, water, and other aggregate to cement ratio, volume to surface area ratio, compressive strength at age of loading, relative humidity, age of drying commencement and age of concrete. The Feed-forward backpropagation networks with Levenberg-Marquardt training function are chosen for proposed ANN models and same implemented on MATLAB platform. The results shows that the proposed ANN models are more rational as well as computationally more efficient to predict time-dependent properties of drying shrinkage and specific creep of HPC with high level accuracy.

• Computers and Concrete
• /
• 제10권1호
• /
• pp.49-57
• /
• 2012

Nano-particle-reinforced cement mortars have been the basis of research in recent years and a significant growth is expected in the future. Therefore, optimization and quantification of the effect of processing parameters and mixture ingredients on the performance of cement mortars are quite important. In this work, the effects of nano-silica, water/binder ratio, sand/binder ratio and aging (curing) time on the compressive strength of cement mortars were modeled by means of artificial neural network (ANN). The developed model can be conveniently used as a rough estimate at the stage of mix design in order to produce high quality and economical cement mortars.

• 동아시아식생활학회지
• /
• 제4권3호
• /
• pp.147-169
• /
• 1994

This study was conducted to ivestigate the quality of modeled chinese-cabbage Kimchi. The mutual action of sub-ingredients and optimum mixing conditions were examined by analyses of pH, acidity, content of vitamins, carotenes, number of total microorganism, and Lactobacilli, the activities of softening related to enzymes (polygalacturonase and ${\beta}$-galactosidase), and sensory quality during fermentation. The result about the mutual action of red pepler powder and garlic showed that the pH was decresed as concentration of garlic was higher and that of red peppler powder became lower. Kimchi had unpleasant taste and undesirable odor when the adding ratio of the peper powder and garlic was unbalanced. As the concentration of garlic became higher, the content of vitamin C in Kimchi tissue decreased while that of vitamin C in Kimchi juice increased. The contents of vitamin B1, B2 and carotene increased as the concentration of garlic became lower. The optimum mixing ratio of red pepper powder and garlic evaluated by overall eating quality was 4.66% and 3.45%, respectively. The result about the mutual action of ginger and green onion was that pH became higher as the concentration of ginger was 1.84% and that of green onion was 5.96%. The intensity of fresh taste and odor became stronger as the concentration of ginger increaed to 2.76% and that of green onion decreased to 2.98%. The balance of sour, salty and hot taste became better as the concentration of ginger increased and that of green onion decreased. The optimum mixing condition evaluated by overall eating quality was 2.94% in ginger ＋ 2.78% in green onion. The contents of vitamin B1, B2 and C were high in this condition. The result about the mutual action of leek and salted anchovy juice was that pH became lower as the concentration of leek increased and that of salted anchovy juice decreased. Sour, hot and sweet tastes were good in the condition of leek 12%, salted anchovy juice 4.69%. Palatable, fresh taste and odor became weaker when the one of both sub-ingredients was too much little. The optimum mixing condition evaluated by overall easting quality was 9.76% in leek ＋ 7.32% in salted anchovy juice. The contents of vitamin B1, B2, C and carotene were high in this condition and other sensory qualities were good. The result about the mutual action of salt and sugar was that pH became lower as the concentration of sugar became higher and that of salt became lower. The sweet taste was reduced of hot taste than salty taste. Palatable and fresh tastes were desirable when Kimchi fermented with less salt and more sugar. The optimum mixing condition evaluated by overall eating quality was 3.29% in sugar ＋ 4.80% in salt. The contents of vitamin B1, B1, C and carotene were high in this condition. The result of model Kimchi fermented at 20$^{\circ}C$ was that the number of Lactobacilli in model Kimchi was higher than that of in control Kimchi. The fermentation period was extended under pH 4.0 and the contents of vitamin B1, B1,C and carotene were high through the whole edible period. The activity of polygalacturonase was low, but that of ${\beta}$-galactosidase was high during fermentation.

• 한국식품조리과학회지
• /
• 제22권5호통권95호
• /
• pp.666-680
• /
• 2006

To obtain basic data for the utilization of saltwort (Salicornia herbacea L.) as a functional ingredient in steamed foam cake, the optimum component ratios for major raw ingredients (saltwort, salt, and wheat flour) as independent variables that affect the product quality were scientifically determined using RSM (response surface methodology) technique. A three-factor and five-level rotational central composite design was used for treatment arrangement. The complete design consisted of 16 experimental points. The three independent variables selected for the RSM experiment were amounts of saltwort (X$_1$, 5${\sim}$25 g), salt (X$_2$, 0${\sim}$10 g), and wheat flour (X$_3$, 470${\sim}$530 g). The optimum responses in specific gravity of the batter and volume, color, texture, and sensory evaluation result of the cake were obtained. The specific gravity and viscosity of the batter at p<0.01 was verified from the regression curve. The characteristic of the batter was influenced by all independent variables, but was extremely dependent on the amount of saltwort ordinary points of the surface responses from the batter formed the minimum points for specific gravities of the batter while viscosities of the batter appeared with the saddle points. Analysis of the response indicated that the amount of saltwort was the most influential factor over the physical properties of the cake, among the dependent variables. Ordinary points of the surface responses from the cake formed the maximum points for loaf volume, hardness gumminess, and chewiness, while Hunter colorimetric parameters appeared with the saddle points. The result indicated that level of the saltwort deviating more or less from the optimal amount decreased the volume and increased the specific gravity with less tender product. Ordinary points of the surface responses of the sensory evaluation scores from the cake formed the maximum points for appearance, flavor, softness, and overall acceptability, while color values appeared with the saddle points. The result also indicated that the level of the saltwort deviating more or less from the optimal amount reduced the preference for the product. Integration of the optimum responses common to all dependent variables that overlapped all the contour maps finally indicated that the combination of 8.3${\sim}$13.8 g saltwort, 2.5${\sim}$6.6 g salt, and 486.5${\sim}$511.5 g wheat flour under the selected preparation recipe optimized the physical and sensory properties in the teamed foam cakes. Practical preparation of the product with median amounts of the ingredients, i.e., 11.0 g saltwort, 4.6 g salt, and 499.0 g wheat flour resulted in similar qualities to the predicted responses. In conclusion, these study results indicated that preparation of steamed foam cake with added saltwort ingredient could potentially produce a more nutritious product with less salt. Further research is required to acquire the optimum levels for sub-ingredients to improve the product quality.

• 한국공간구조학회논문집
• /
• 제14권4호
• /
• pp.73-80
• /
• 2014

For the last decade many bridges and buildings have experienced flexural strengthening with the fiber reinforced polymer(FRP) bonding system, demands for increasing heavy traffic loads and the changing of the code application. Of the many strengthening systems, NSM(near surface mounted) system with FRP has become attractive and popular way of strengthening for the existed RC structures and many studies and applications of this technique have significantly increased all over the world. Meanwhile, polymer mortar that contains much of the same ingredients as cement but includes the addition of certain polymer resins for enhancing desired physical properties, has been used as an alternative adhesive. This paper focuses on flexural behaviour of CFRP-bar NSM system with variables such as kinds of adhesive, anchorage, sectional aspect ratio. Based on the test results and test-to-predicted ratio, this paper provides researchers and practical engineers a fundamental knowledge and intuition.