• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.481-489
• /
• 2023

Drained cyclic triaxial tests were conducted on a saturated sand to examine its deformation characteristics under either axial or lateral cyclic loading condition. To apply lateral cyclic loading, the cell pressure was cycled while maintaining a constant vertical stress. The strain accumulations and flow direction in the soil were presented and discussed considering various initial stress ratios (η₀), cyclic stress amplitudes and cyclic stress paths. The results indicate that axial strain accumulation shows an exponential increase with the maximum stress ratio (η^max). The initial deviatoric stress has comparable effects with lateral cyclic stress amplitude on the accumulated axial strain. In contrast, the accumulated volumetric strain is directly proportional to the lateral cyclic stress amplitude but not much affected by η₀ values. Due to the anisotropy of the soil, the accumulated axial and lateral bulging strains are greater in lateral cyclic loading when compared to axial cyclic loading even though η^max is the same. It is also found that η^max affects soil's lateral deformation and increasing the ratio could change the lateral deformation from contraction to bulging. The flow direction depends on η^max in the sand under lateral cyclic loading, regardless of η₀ values and the cyclic stress amplitudes, and a large η^max could lead to great deviatoric strain but a little volumetric strain accumulation.

• 한국지진공학회논문집
• /
• 제18권5호
• /
• pp.231-240
• /
• 2014

This study reviews the status and validity of seismic design criteria (SDC) for major facilities in Korea, which are composed of performance criteria and technical standard. Various facilities with different seismic design response spectra are analyzed to identify their seismic performance and necessity of eventual retrofit. The results are used to derive improvement directions of SDC. It is also concluded that the technical standard should be improved after the revision of the performance criteria.

• 비파괴검사학회지
• /
• 제15권3호
• /
• pp.467-481
• /
• 1995

• 한국지반신소재학회논문집
• /
• 제20권1호
• /
• pp.45-55
• /
• 2021

본 연구에서는 수치해석모형을 통하여 수위변동시 필댐의 거동 특성을 분석하고 저수지의 안전관리 방안을 고찰하였다. 수치해석 프로그램(GTS NX 및 LIQCA)을 이용하여 필댐의 상·하류측 Shell 및 Core에서 수위승강에 따른 소성전단변형률, 수평변위, 응력경로, 간극수압 등을 분석하였다. 제체의 거동을 분석한 결과, 제체 내의 수위가 빠른 속도로 상승하면 간극수압 및 변위 또한 급격하게 증가하는데, 수위의 상승은 제체 내의 간극수압 증가와 제체의 포화도 증가를 유발하며, 제체의 유효응력을 감소시키는 것으로 나타났다. 이러한 수위승강 시 필댐의 거동 특성은 제체의 강도 및 강성이 저하되는 원인이 되고, 침투로 인해 발생하는 제체의 변형에 의해 소성전단변형률이 축적되어 변위 증가를 유발하는 것으로 판단된다. 본 연구를 통해 저수지의 정밀안전진단 상태평가 기준 개선안을 제안하였으며, 향후 저수지 안전진단지침 개정안 마련 시 기초자료로 활용될 수 있을 것으로 판단된다.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2002년도 제21회 하계학술발표회 논문집
• /
• pp.157-179
• /
• 2002

Many advanced scholars and policy makers say that biotechnology is and will be the most important technology in 21th century. And biotechnology has a lots of character which are new and high tech industry, costing too much on early R&D stage and so on. One of them is that it can't be developed all seater by one single firm. So effective and efficient way to solve this generic problem is using the infrastructure which is given by government for flourishing the bio industry, especially, Knowledge infrastructure. The purpose of this study is to understand and give the information about which knowledge infrastructure affects biotechnology firms to obtain competitive advantage in technological improvement. To develop this object, I made 5 variables about infrastructure in biotechnology such as high-skilled researchers infrastructure, R&D policy infrastructure, industrialization infrastructure that supports the biotechnology industry, networking infrastructure between firms, universities, research centers, and finally bio-safety infrastructure. According to this study, to obtain technological competitive advantage for Korean bio firms, all main actors those are government, industry, university, research center they try to develop bio sector at the same time. After this cooperated effort, Korean bio firms and industry can get a international competitiveness in the global society which no one conquer the market.

• 융합정보논문지
• /
• 제10권9호
• /
• pp.147-153
• /
• 2020

드론 산업이 최근 4차 산업 혁명을 주도하는 분야로 발표되면서 드론 시장을 창출하기 위해 많은 투자와 연구가 이루어지고 있다. 그러나 드론 시험비행에 대한 수요가 급격히 증가함에 따라 고흥 항공센터만으로는 시험비행 요구를 충족시키기가 어려우며, 드론과 같이 신규 개발하였거나 기존 형상을 개조한 비행체가 비행시험장이 아닌 곳에서 시험비행을 수행할 시 예측할 수 없는 비행성능이나 조종 미숙으로 인한 잠재적 사고 위험성을 가지고 있다. 따라서 유인 및 무인 항공기의 안전 검증을 위해 충분한 시험비행 공간의 확보가 필수적이다. 따라서 본 연구는 국내 비행시험장의 상태와 ICAO DOC 9184-AN / 902 Part 1을 분석 하여, 종합적인 비행 테스트 인프라를 구축하기 위한 비행 테스트 사이트 예비 평가 방법과 인프라 사이트 평가 방법을 제시하였다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.432-439
• /
• 2009

This research project was carried out to develop the technique to assess quantitatively and rapidly the stability of a tunnel by using the measured displacement at the tunnel construction site under excavation. To achieve this purpose, a critical strain concept was introduced and applied to an assessment of a tunnel under construction. The new technique calculates numerically the strains of the surrounding ground by using the measured displacements during excavation. A numerical practical system was developed based on the proposed analysis technique in this study. The feasibility of the developed analysis module was verified by incorporating the analysis results obtained by commercial programs into the developed analysis module. To verify the feasibility of the developed analysis module, analysis results of models both elastic and elasto-plastic grounds were investigated for the circular tunnel design. Then the measured displacements obtained in the field are utilized practically to assess the safety of tunnels using critical strain concept. It was verified that stress conditions of in-situ ground and ground material properties were accurately assessed by inputting the calculated displacement obtained by commercial program into this module for the elastic ground. However for the elasto-plastic ground, analysis module can reproduce the initial conditions more closely for the soft rock ground than for the weathered soil ground. The stability of tunnels evaluated with two types of strains, that is, the strains obtained by dividing the crown displacement into a tunnel size and the strains obtained by using the analysis module. From this study, it is confirmed that the critical strain concept can be fully adopted within the engineering judgment in practical tunnel problems and the developed module can be used as a reasonable tool for the assessment of the tunnel stability in the field.

• 한국터널지하공간학회 논문집
• /
• 제17권5호
• /
• pp.553-561
• /
• 2015

본 연구에서는 국내에 활발히 적용되기 시작한 쉴드 TBM 터널의 합리적인 유지관리를 위한 성능평가 기준을 제시하였다. 이를 위해 국내 외 성능평가 기준을 분석하였고, 국내 시공된 쉴드 TBM 터널에 대한 현장조사 및 정밀안전진단 보고서 분석을 통한 변상사례를 조사하여 성능평가 항목을 균열, 누수, 파손, 박리, 층분리 및 박락, 백태, 품질상태, 철근노출, 탄산화, 단차, 볼트상태, 배수상태, 지반상태, 접속부상태, 공동구 상태로 선정하였다. 또한 다중의사결정기법인 AHP 기법을 활용하여 선정된 성능평가에 대한 합리적인 가중치를 산정하였다.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.29-36
• /
• 2015

Common utility tunnel is essential to the daily lives of people underground utilities (electricity, gas and supply facilities such as water, communication facilities, sewer facilities, etc.) to improve the appearance by co-acceptance and disaster prevention, important for the conservation of the city's population was concentrated road construction the city-based facilities. There is recognition of the importance of the various supply treatment facilities in common utility tunnel as infrastructure to accommodate joint according to the city expanded, the demand for infrastructure. In this paper, a cost-benefit analysis using a one-time occurrence, without simply relying on cost or current cost, project manager for the city-dimensional feasibility study conducted, the user level of the maintenance costs and user costs, including social costs items from various angles can be investigated and proposed a mechanism of economic feasibility common utility tunnel. Evaluation of the proposed technique is cost-benefit and cost caused by installing common utility tunnel the existing pipeline area - was investigated by the benefit analysis, extended and repeated common utility tunnel installation depends much affected by the excavation, so users of reducing the number of repeat excavation convenience can be seen that this occurs.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1358-1365
• /
• 2010

Estimating condition of slope is difficult because of nonlinear time dependency and seasonal effects, which affect the displacements. Displacements and displacement patterns of landslides are highly variable in time and space, and a unique approach cannot be defined to model landslide movements. Characteristics of movements are obtained by using a statistical method called Principal Component Analysis(PCA). The PCA is a non-parametric method to separate unknown, statistically uncorrelated source processes from observed mixed processes. In the non-parametric approaches, no physical assumptions of target systems are required. Instead, since the "best" mathematical relationship is estimated for given data sets of the input and output measured from target systems. As a consequence, non-parametric approaches are advantageous in modeling systems whose geomechanical properties are unknown or difficult to be measured. Non-parametric approaches are consequently more flexible in modeling than parametric approaches. This method is expected to be a useful tool for the slope management of and alarm systems.