• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.157-157
• /
• 2017

To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.136-139
• /
• 2003

Thermal imaging system is electro-optical imaging device which can make visible the difference of infrared energy naturally emitted by objects. It is acquire the same images at any time of the day or night. There it has been readily available to the night observation such as fire control systems. In this study, we are manufacturing thermal image Al flat mirror. The surface roughness 3.539nm Ra and power 0.382 fringe(at 632.8nm), irregularity 0.835 fringe(at 632.8nm) for form waviness of thermal image Al flat mirror are very satisfied. The results will be reflected for development of the ultra precision application. And a brief review of Ultra-precision system in the field of Ultra-precision at Korea photonics technology institute (KOPTI) is present in this paper.

• 한국멀티미디어학회논문지
• /
• 제8권1호
• /
• pp.46-55
• /
• 2005

본 논문에서는 소형 위협체를 조기에 탐지하여 위치를 알려주는 파노라믹 적외선 영상 경보 장치를 구현하였고, 경보 성능 향상을 위한 적외선 영상 향상 기법을 제안하였다. 구현 장치는 센서 헤드 유닛, 신호 처리 유닛 등으로 구성된다. 센서 헤드 유닛은 1차원 다중 배열 적외선 센서를 정속으로 고속 회전하여 360도의 넓은 시계 영역을 가지는 파노라믹 열영상을 획득한다. 신호 처리 유닛은 파노라믹 영상을 90도의 부영상으로 나누고, 각 부영역의 통계적 특성에 따라 적응적 평탄역값(adaptive plateau value)을 구한다 그리고 적응적 평탄역값으로 히스토그램을 변화시킴으로써 위협체을 두드러지게 하였으며, 실시간 처리를 위하여 DSP와 FPGA를 이용하여 장치를 구현하였다. 구현 시스템에 제안한 영상 향상 기법을 적용한 결과 기존 기법에 비해 오경보율이 낮음과 시각적으로 위협체의 식별이 용이함을 확인하였다.

• 도시과학
• /
• 제8권1호
• /
• pp.7-14
• /
• 2019

Recently, interest in solar energy, which is the center of new government energy policy, is increasing. However, the focus is on mass production of solar power plants, and policies and related technologies for maintenance and management of existing installed PV modules are insufficient. In this study, we use UAV (Unmanned Aerial Vehicle) to acquire RGB and infrared images, apply it to the structure-from-motion (SfM) based image analysis tool, model the three- And the position of the hot spot was monitored and coordinates were detected. As a result, it is possible to provide basic spatial information for maintenance of solar module by monitoring and position detection of hot-spot suspected solar cells by superimposing infrared image and RGB image based on unmanned aerial vehicle.

• 한국전자통신학회논문지
• /
• 제19권1호
• /
• pp.301-307
• /
• 2024

본 연구는 다양한 스케일 조건에서 열화상 이미지를 향상시키기 위한 새로운 캐스케이드 융합 구조를 제안한다. 특정 스케일에 맞춰 설계된 방법들은 다중 스케일에서 열화상 이미지 처리에 한계가 있었다. 이를 극복하기 위해 본 논문에서는 다중 스케일 표현을 활용하는 캐스케이드 특징 융합 기법에 기반한 통합 프레임워크를 제시한다. 서로 다른 스케일의 신뢰도 맵을 순차적으로 융합함으로써 스케일에 제약받지 않는 학습이 가능해진다. 제안된 구조는 상호 스케일 의존성을 강화하기 위해 엔드 투 엔드 방식으로 훈련된 합성곱 신경망으로 구성되어 있다. 실험 결과, 제안된 방법은 기존의 다중 스케일 열화상 이미지 향상 방법들보다 우수한 성능을 보인다는 것을 확인할 수 있었다. 또한, 실험 데이터셋에 대한 성능 분석 결과 이미지 품질 지표가 일관되게 개선되었으며, 이는 캐스케이드 융합 설계가 스케일 간 견고한 일반화를 가능하게 하고 교차 스케일 표현 학습을 더 효율적으로 수행하는 데 기여하는 것을 보여준다.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.51-58
• /
• 2020

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm^-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH₂-), a methyl group (-CH₃), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH₃=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH₂·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.717-720
• /
• 2005

Recently as large sized urban development and the city ward drifting of population are caused, the urban surface temperature is raised very seriously and rapidly. These artificial developments have destroyed the inner and outer landscapes such as topography and have changed complex local climate such as a sudden rise in temperature, the change of wind field and air pollution. In order to clarify this problem visually, the studies on extracting the thermal infrared and the characteristic analysis of local climate in urban area had been performed by using the sixth band of Landsat TM and ETM+. However, there is a need to alternate Landsat TM and ETM+ because these satellite images are not applied any more. Therefore, in this paper it is proposed to use 2 Aster image (2004.4.17 daily 2b03, 2004.10.10 night 2b03) of EOS AM and to extract the surface temperature. Also, the pattern of surface temperature in urban area and the application possibility in local climate study are proposed by verifying the correlation with A WS data. Also, IKONOS image was used to figure out the artificial development area in visual.

• 대한공간정보학회지
• /
• 제25권1호
• /
• pp.71-78
• /
• 2017

최근 널리 보급되고 있는 태양광 발전소의 유지관리를 위해 다양한 연구들이 시도되고 있다. 본 연구에서는 unmanned aerial vehicle(UAV)기반 열적외선 센서를 이용하여 태양광 셀의 발열을 분석하는 것으로서 주요 결론은 다음과 같다. 먼저 UAV 기반 RGB 센서를 이용하여 정사영상과 digital surface model(DSM) 자료를 구축하였으며, 이를 통해 태양광 셀의 발열 분석에 필요한 태양광 모듈 레이어를 생성하였다. 또한 태양광 모듈 레이어의 위치정확도를 평가하기 위해 virtual reference service(VRS) 측량을 이용하여 검정점에 대한 수평오차를 분석한 결과, 표준오차가 $dx={\pm}2.4cm$, $dy={\pm}3.2cm$로 높은 위치정확도를 확보할 수 있었다. 그리고 태양광 셀의 발열 실험을 위해 고무패치를 설치한 후 UAV 열적외선 센서를 이용하여 발열이 생기는 고무패치의 위치를 효과적으로 분석할 수 있었다. 또한 고무패치 셀 비율과 UAV 열적외선 센서에 의한 셀 비율의 표준오차는 ${\pm}3.5%$로 나타났으며, 따라서 UAV 기반 열적외선 센서를 이용하여 태양광 셀의 발열을 효과적으로 분석할 수 있었다. 아울러 발열이 생기는 셀이 위치하고 있는 태양광 모듈의 코드를 자동으로 추출함으로서 효과적인 태양광발전소 유지보수가 가능하게 되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.148-150
• /
• 2006

In this paper, the applicability of an UET(ultrasound excited thermography) for a defect detection of the welded receptacle is described. An UET(ultrasound excited thermography) is a defect-selective and fast imaging tool for damage detection. A high power ultrasound-excited vibration energy with pulse durations of 280ms is injected into the outer surface of the welded receptacle made of Al material. An ultrasound vibration energy sent into the welded receptacle propagate inside the sample until they are converted into the heat in the vicinity of the defect. The injection of the ultrasound excited vibration energy results in heat generation so that the defect is turned into a local thermal wave transmitter. Its local heat emission is monitored by the thermal infrared camera. And they are processed by the image recording system. Measurement was performed on aluminum receptacle welded by using Nd:YAG laser. The observed thermal image revealed two area of defects along the welded seam.

• 동의생리병리학회지
• /
• 제20권2호
• /
• pp.488-493
• /
• 2006

To make a objective diagnosis of Dam Hun(痰暈), we investigated the 63 patients with Dam Hun(痰暈) and 34 normal people as control group. we compared the thermal difference between Chon-jung(CV17 ) and Chung-wan(CV12 中脘), Chon-jung(CV17 ) and Gwan-won(CV4 關元) and we compared the thermal difference of Yang-mun(ST21 梁門), Chun_chu(ST25 天樞), Su-do(ST28 水道), too. All 63 patients had dizziness and GI trouble. They had the symptom - fatigue, nausea vomitting, head heaviness, indigestion, cold limbs, headache, heart burn, constipation, diarrhea, anorexia. And some had edema, numbness, insomnia, palpitation, facial flushing, dysuria, ringing. Considering the average temparature of Chon-jung(CV17 ), Chung-wan(CV12 中脘), Gwan-won(CV4 關元), Yang-mun(ST21 梁門), Chun-chu(ST25 天樞), Su-do(ST28 水道) between the patients group and the control group, the patients group were lower than the control group except for Chon-jung(CV17 ), Gwan-won(CV4 關元), but the statistical significance was not. Considering the thermal difference of Chon-jung(CV17 ) and Chung-wan(CV12 中脘), Gwan-won(CV4 關元), Yang-mun(ST21 梁門), Chun-chu(ST25 天樞), Su-do(ST28 氷道) between the patients group and the control group, the temparature deviation of Chon-jung(CV17 ) and Chung-wan(CV12 中脘), Chon-jung(CV17 ) and Yang-mun(ST21 梁門) was significant. We suggest that coldness of upper abdomen is significant in diagnosis of Dam Hun(痰暈).