• Journal of Information Display
• /
• v.13 no.1
• /
• pp.43-49
• /
• 2012

Depth sensitivity is considered one of the factors influencing 3D displays the most. In this paper, the perceptual 3D depth was quantitatively measured to compare the depth difference among the display devices. No difference was found in the typical display performance among the devices, but the subjective evaluation of the depth sensitivity where the disparity was varied showed that the organic light emitting diode (OLED) had the highest performance, mainly due to its almost 0% crosstalk, one of the features of OLED. Crosstalk is a form of image superposition that greatly affects the depth sensitivity. The experiment results showed that the quantitative depth sensitivity varies due to geometric factors such as disparity, viewing distance, and subjective sensitivity, depending on the display image characteristics, such as crosstalk and contrast.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.213-217
• /
• 2011

Printing technologies were applied to fabricate a flexible organic thin-film transistor (OTFT) backplane for electrophoretic displays (EPDs). Various printing processes were adopted to maximize the figures of each layer of OTFT: screen printing combined with reverse offset printing for the gate electrodes and scan bus lines with Ag ink, inkjet for the source/drain electrodes with glycerol-doped Poly (3,4-ethylenedioxythiophene): Poly (styrenesulfonate) (PEDOT:PSS), inkjet for the semiconductor layer with Triisopropylsilylethynyl (TIPS)-pentacene, and screen printing for the pixel electrodes with Ag paste. A mobility of $0.44cm^2/V$ s was obtained, with an average standard deviation of 20%, from the 36 OTFTs taken from different backplane locations, which indicates high uniformity. An EPD laminated on an OTFT backplane with $190{\times}152$ pixels on an 8-in panel was successfully operated by displaying some patterns.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1137-1138
• /
• 2008

The purpose of this study is to implement a landscape lighting system that displays full color video by precisely controlling the R, G, B (Red, Green, Blue) LEDs which have a resolution of 256 each. The system implemented in this study consists of a PC, MASTER, SLAVEs and MODULEs. The PC sets the various landscape lighting displays, and the image files can be sent to the MASTER through a virtual serial port connected to the USB (Universal Serial Bus). The MASTER sends a sync signal to the SLAVE. The SLAVE uses the signal received from the MASTER and the landscape lighting display pattern.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.919-922
• /
• 2003

This paper presents a novel low power driving circuit for passive matrix organic lighting emitting diodes (OLED) displays. The proposed driving method for a low power OLED driving circuit which reduce large parasitic capacitance in OLED panel only use current driving method, instead of mixed mode driving method which uses voltage pre-charge technique. The driving circuit is implemented to one chip using 0.35${\mu}{\textrm}{m}$ CMOS process with 18V high voltage devices and it is applicable to 96(R.G.B)X64, 65K color OLED displays for mobile phone application. The maximum switching power dissipation of driving power dissipation is 5.7mW and it is 4% of that of the conventional driving circuit.

• Journal of Information Display
• /
• v.10 no.2
• /
• pp.68-71
• /
• 2009

A replica-molding method of fabricating a dual-gap substrate for transflective liquid crystal (LC) displays is demonstrated. The dual-gap substrate provides homeotropic alignment for the LC molecules without any surface treatment and embedded bilevel microstructure on one of the two surfaces to maintain different cell gaps between the transmissive and reflective subpixels. The proposed transflective LC cell shows no electro-optic disparity between two subpixels and reduces the panel thickness and weight by 30% compared to the conventional transflective LC cell, which has two glass substrates.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.180-183
• /
• 2009

A stamping-assisted rubbing technique for generating bidirectional alignment in the fabrication of wide-viewing twistednematic (TN) liquid crystal displays (LCDs) was developed. A patterned layer of a fluorinated acrylate polymer was transferred onto the first rubbed alignment layer prepared on a substrate by stamping. The fluorinated acrylate polymer provides a protective layer that covers the first alignment layer during the second rubbing process to facilitate the bidirectional alignment of the LC molecules. The LC cell in the twisted geometry with two bidirectional-alignment layers showed stable electro-optic properties and wide-viewing characteristics. The stamping-assisted rubbing technique serves as a mask-free alignment method of producing multidomains for wide-viewing LCDs.

• Journal of Information Display
• /
• v.10 no.2
• /
• pp.80-86
• /
• 2009

The variation of the electrical characteristics of thin-film transistors (TFTs) causes a non-uniform image quality problem, and the differential aging of organic light-emitting diode (OLED) devices causes an image-sticking problem. A video data correction method is proposed herein as an effective solution to the non-uniform electro-optical characteristics of the pixels in activematrix organic light-emitting diode (AMOLED) displays. The results of the simulation that was conducted show that the proposed method successfully senses the electrical characteristics of TFTs and the degradation of OLEDs and effectively compensates for them.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.10-14
• /
• 2007

LCD performance is generally evaluated in terms of luminance and color versus viewing angle. In the present paper, we show that this type of display can be favorably characterized in terms of polarization. We show that ELDIM EZContrast instrument which is routinely used for viewing angle measurements can be upgrade for measuring the polarization state of the light at each incidence and azimuth angle. More precisely, the degree of polarization of light, its ellipticity and polarization direction can be measured at each incidence angle between 0 and $88^{\circ}$ and for all the azimuth angles (from 0 to $360^{\circ}$). Important differences between the displays can be detected and related to their internal structures when luminance and color profiles are quite similar. The same setup can also be used to characterize optical components of the LCDs.

• Journal of Information Display
• /
• v.11 no.2
• /
• pp.57-62
• /
• 2010

A method of characterizing time-sequential stereoscopic 3D displays based on the measurement of the temporal behavior of the systems vs. the grey levels is proposed. An Nvidia 3D vision kit with a 3D-ready SAMSUNG 2233RZ LCD display is characterized in the paper. OPTISCOPE SA especially designed for the precise measurements of the luminance and temporal behavior of LCD displays was used. The transmittance and response time of the shutter glasses was first evaluated. Then the grey-to-grey response times of the display were measured. The 2D and 3D behaviors of the display were then compared. Finally, the temporal behavior of the complete system was modeled, and the grey-level variations on one view were deduced as a function of the synchronization and level of the other eye. The main sources of imperfection were identified and quantified, and a full computation of the system performances was done.

• Journal of Information Display
• /
• v.6 no.4
• /
• pp.40-44
• /
• 2005

Nanometer-sized bismuth oxide with a diameter of about 80 nm was used as a new electron reflection material in a 29" Real Flat CPT. This bismuth oxide was well dispersed over pH8 in slurry. Spray coating was performed clearly and uniformly and was ensured that there was no clogging of shadow mask hole. Coating thickness was expressed to the brightness of chromaticity for the sprayed layer and was also well controlled during the spraying process. Doming was improved by about 10% in spite of the similar coating weight in comparison with the average 3.5 ${\mu}m$ of the conventional bismuth oxide.