• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.270-279
• /
• 2003

Parametric studies have been conducted into the variability of the factors affecting the ultrasonic testing applied to weldments. The influence of ultrasonic equipment, transducer parameters, test technique, job parameters, defect type and characteristics on reliability far defect detection and sizing was investigated by experimentation. The investigation was able to build up substantial bank of information on the reliability of manual ultrasonic method for testing weldments. The major findings of the study separate into two parts, one dealing with correlation between ultrasonic techniques, equipment and defect parameters and inspection performance effectiveness and other with human factors. Defect detection abilities are dependent on the training, experience and proficiency of the UT operators, the equipment used, the effectiveness of procedures and techniques.

• 한국영양학회:학술대회논문집
• /
• 한국영양학회 2001년도 춘계연합학술대회 초록
• /
• pp.202.2-202
• /
• 2001

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.309-312
• /
• 2000

In this paper, The Influence of chromatic fiber dispersion on the transmission distance of MMW(millimeter-wave) link is analyzed and discussed. It is shown that dispersion significantly limits the transmission distance in intensity modulated direct detection and heterodyne links operating in the above 20㎓ frequency region by inducing a carrier to noise penalty on the transmitted signal. We analyze and discuss the influence of dispersion induced CNR(Carrier to Noise Ratio) penalty for direct detection and heterodyne method from simulation.

• Communications for Statistical Applications and Methods
• /
• 제10권2호
• /
• pp.519-524
• /
• 2003

We suggest a method of identifying outliers, using local influence, in regression when linear constraints are imposed on the regression coefficients. An example is given for illustration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1131-1134
• /
• 2007

To prevent biological influence of images upon viewers, we investigated the characteristics features of images and of viewing environments which can cause photosensitivity seizures and visually-induced motion sickness, and developed some methods of detection and conversion of images that can cause such influence.

• Journal of applied mathematics & informatics
• /
• 제26권5_6호
• /
• pp.1133-1138
• /
• 2008

A general method of detecting outliers based on a change of likelihood by using the influence function is suggested. It can be applied to all kinds of distributions that are specified by parameters. For the multivariate normal case, specific computations are made to get the corresponding conditional influence function. A numerical example is provided for illustration.

• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.569-594
• /
• 2014

Damage detection methods based on modal analysis have been widely studied in recent years. However the calculation of mode shapes in real structures can be time consuming and often requires dedicated software programmes. In the present paper the combined application of proper orthogonal decomposition and gapped smoothing method to structural damage detection is presented. The first is used to calculate the dynamic shapes of a damaged structural element using only the time response of the system while the second is used to derive a reference baseline to which compare the data coming from the damaged structure. Experimental verification is provided for a beam case while numerical analyses are conducted on plates. The introduction of a stiffener on a plate is investigated and a method to distinguish its influence from that of a defect is presented. Results highlight that the derivatives of the proper orthogonal modes are more effective damage indices than the modes themselves and that they can be used in damage detection when only data from the damaged structure are available. Furthermore the stiffened plate case shows how the simple use of the curvature is not sufficient when analysing complex components. The combined application of the two techniques provides a possible improvement in damage detection of typical aeronautical structures.

• 한국통신학회논문지
• /
• 제34권7C호
• /
• pp.715-723
• /
• 2009

본 논문에서는 나머지 주파수 옵셋이 (residuaI frequency offset: RFO) 존재하는 대역 확산 시스템의 부호 획득을 위해 듀얼셀 결합 (dual-cell combining: DCC) 검파 기법을 제안한다. RFO가 존채할 때, 부호 획득 과정 동안 검파에 사용되는 상관 첨두는 작은 진폭을 갖는 두 개의 주변 첨두로 나눠지게 되며, 이로 인해 부호 획득 성능이 하락하게 된다. DCC 겹파 기법은 두 개의 연속된 상판값을 결합하여 결정 변수로 사용함으로써 RFO가 상관 첨두에 미치는 영향을 완화시킬 수 있다. 또한, 성능 평가를 통해 DCC 검파 기법이 한 개의 상관값을 결정 변수로 사용하는 이제까지의 검파 기법에 비해 더 나은 평균 동기화 시간 성능을 갖는 것을 확인할 수 있다.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.563-572
• /
• 2017

Ordinary reinforced concrete (RC) and prestressed concrete bridges are two popular and typical types of short- and medium-span bridges that accounts for the vast majority of all existing bridges. The cost of maintaining, repairing or replacing degraded existing RC bridges is immense. Detecting the abnormality of RC bridges at an early stage and taking the protective measures in advance are effective ways to improve maintenance practices and reduce the maintenance cost. This study proposes a systematic method from influence line (IL) identification to damage detection with applications to RC bridges. An IL identification method which integrates the cubic B-spline function with Tikhonov regularization is first proposed based on the vehicle information and the corresponding moving vehicle induced bridge response time history. Subsequently, IL change is defined as a damage index for bridge damage detection, and information fusion technique that synthesizes ILs of multiple locations/sensors is used to improve the efficiency and accuracy of damage localization. Finally, the feasibility of the proposed systematic method is verified through experimental tests on a three-span continuous RC beam. The comparison suggests that the identified ILs can well match with the baseline ILs, and it demonstrates that the proposed IL identification method has a high accuracy and a great potential in engineering applications. Results in this case indicate that deflection ILs are superior than strain ILs for damage detection of RC beams, and the performance of damage localization can be significantly improved with the information fusion of multiple ILs.

• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.13-17
• /
• 2006

In this paper, we propose an audio extraction method to decrease the influence of the original signal by modifying the watermarking detection system proposed by P. Bassia et al. In the extraction of the watermark, we employ a simple mean filter to remove the influence of the original signal as a preprocessing of extraction and the repetitive insertion of the watermark. As the result of the experiment, for which we used about 20 kinds of actual audio data, we obtain a watermark detection rate of about 95% and a good performance even after the various signal processing attacks.