• 한국염색가공학회지
• /
• 제3권2호
• /
• pp.34-42
• /
• 1991

The effects of electrolyte on dyeing properties of cotton fiber with Congo Red have been studied at 90, 70 and $40^{\circ}C$. Each dyeing carried into an infinite bath with $1\times10^{-4}$ mol/l of Congo Red and with various concentration of electrolytes. The results obtained from this study were as follow; 1. The equilibrium adsorption of dye $(C_\infty)$ values decreased with increasing dyeing temperature, $C_\infty$ values increased in the order KCl>NaCl>LiCl. 2. The values of apparent diffusion coefficients $(D_a)$ increased with increasing dyeing temperature, but $D_a$ values decreased in the order KCl$D_a$ values decreased with increasing electrolyte concentration. 4. Effect of electrolytes decreased with increasing dyeing temperature. 5. The values of standard affinities of dyeing $(-\triangle\mu^{\circ})$, the standard heats of dyeing $(-\triangleH^{\circ})$, and the standard entropies $(-\triangleS^{\circ})$, increased in the order KCl>NaCl>LiCl. 6. Equilibrium adsorption isotherm curve were Freundlich type, and in the Equation y=a.x$^{n}$ , the values of a and n increased in the order KCl>NaCl>LiCl. 7. The value of $-\triangle\mu^{\circ}$, $-\triangleH^{\circ}$, and $-\triangleS^{\circ}$, decreased with increasing electrolyte concentration.

• Journal of Biosystems Engineering
• /
• 제35권1호
• /
• pp.21-30
• /
• 2010

This study was performed to develop an active tire pressure control system that can adjust tire pressure to the optimum level according to traveling and working condition of agricultural tractor. For the development of active tire pressure control system, pneumatic supplier, solenoid valve block including pneumatic supply line, infinite rotation type pneumatic supplier with rotary joint unit, tire pressure transceiver module and control algorithm were developed. Also, tire simulator was developed. Using this tire simulator, the feasibility of each part constructing actual system was tested by checking the performance. The average communication success ratio was 98.3% between tire pressure transmitter and receiver module according to the various tire rotational speed and data receipt position of receiver module. The communication performance of the developed transmitter and receiver module was very stable in any condition. The tire pressure control system was accomplished by using the proportional control algorithm in this study. Also tire pressure control performance of developed control system was analyzed by using the tire simulator. As a result of control performance analysis to the developed system, the developed control system took 307 seconds to inflate agricultural tractor's tire from 50 kPa to 180 kPa. In opposite case, it took 210 seconds. Also it was able to control the tire pressure accurately under ${\pm}0.9%$ (FS) in any condition.

• 한국실내디자인학회논문집
• /
• 제22권2호
• /
• pp.48-57
• /
• 2013

With the environmental changes of the times, consumers expect new experiences and seek hotels with various leisure facilities and sensuous design rather than existing static and conservative ones. In particular, boutique hotels connected to all the aspects of lifestyle including architecture, culture, art and fashion are trying out a variety of designs through collaborations in the ways of enhancing their brand images in the design industry. Design through collaboration between different fields has an infinite possibility of breaking from classicism and creating a new type of space in hotel design. Thus, this study attempts to analyze a few cases of boutique hotels by collaborative design that has recently been vitalized and to seek for a direction by suggesting the methods of utilizing design by collaboration for the hotel industry that will further be expanded in the future. For this purpose, first, the theories of collaboration and boutique hotel will be reviewed and the characteristics will be drawn out based on the examples of boutique hotels to which collaborations have been applied by enterprises and designers. By analyzing and classifying the cases of the domestic and foreign boutique hotels through practical experiences among the hotels recently designed by the collaborations between enterprises and designers based on the basic frame of the five characteristics drawn out: identity, symbolism, temporality, locality and interaction, objective values will be drawn out and data for presenting the future orientation will be built. In the Korean hotel industry that is gradually expanding, boutique hotel designs through the appropriate collaboration between enterprises and designers should be considered for the extensive development of the future hotel industry.

• 한국광학회지
• /
• 제20권3호
• /
• pp.156-165
• /
• 2009

가우스 괄호법을 이용하여 무한 물점을 포함한 모든 유한 물점을 대상으로 하는 모든 복잡한 줌 렌즈에서 사용가능한 일반적인 근축광선 줌 궤적 추적식을 유도하였다. 이를 Visual Basic으로 프로그램화하여 수치해석적으로 줌 궤적을 구하였다. 이 결과 이 식의 해는 물체의 거리에 관계없이 모든 종류의 줌 렌즈에서 줌 궤적에 대한 초기설계에 유연하면서 통합적으로 적용할 수 있다. 이 식의 유용성을 증명하기 위하여 $M_{4a}$와 $M_{4h}$ 형태의 4군 줌 렌즈들과 $M_{5n}$ 형태의 5군 줌 렌즈의 줌 궤적을 유한 물점에 대해서 빠르게 산출할 수 있음을 보였다.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.181-186
• /
• 2012

본 논문에서는 변수 불확실성과 필터이득 섭동을 가지는 시스템에 대한 견실비약성 $H_{\infty}$ 칼만형필터 설계기법을 제안한다. 필터가 존재할 충분조건과 견실비약성 $H_{\infty}$ 필터 설계기법을 선형행렬부등식 (LMI: Linear Matrix Inequality 접근법으로 제안하고 시스템과 필터의 불확실성을 매개변수화 선형행렬부등식(PLMI: Parameterized Linear Matrix Inequality)으로 구조화된 불확실성의 형태로 표현한 후 Lyapunov 함수를 통해 시스템의 불확실성과 더불어 필터이득섭동을 고려한 칼만형 $H_{\infty}$ 필터가 존재할 충분조건과 필터설계기법을 PLMI 형태로 보인다. PLMI는 무한개의 LMI의 형태로 나타나므로 완화기법(relaxation technique)을 적용하여 유한개의 LMI의 형태로 변환한 후 견실하고 최적화된 필터이득과 필터섭동범위를 계산하고, 예제와 모의실험을 통해 제시된 필터의 타당성을 검증한다.

• 한국항해항만학회지
• /
• 제34권6호
• /
• pp.417-422
• /
• 2010

정수중 부선 주위의 유동 특성을 조사 및 분석하기 위하여 부선의 저항성능을 모형시험과 CFD를 이용한 수치계산에 의하여 해석하였다. 모형실험은 무한수심 조건에서의 회류수조에서 저항과 선측파형 등을 관측하였으며, 유동장 해석을 위하여 VOF(Volume of Fluid)법을 기초로 한 수치 시뮬레이션을 이행하였다. 부선의 형태에 따르는 유동특성을 파악하기 위하여 서로 다른 모습의 부선 모형을 제작하였으며, 모형실험은 설계속도를 7kts로 정하고 역조와 순조의 조류 영향을 고려하여 5kts~10kts의 구간에서 실험을 실시하여 각 속도에 따르는 저항 특성을 비교 검토 하였다. 수치 시뮬레이션은 일정 속도에서 만재상태를 기준으로 하여 계산을 수행하였으며 수조 실험 결과와 상호 비교함으로서 본 수치계산법의 타당성을 검증할 수 있었으며, 부선의 저항성능 및 선체 주위 유동장의 특성을 분석하였다. 저속일 때 25% 정도의 저항의 차이가 발생하고, 7kts부터 유효마력이 급격히 증가하는 현상을 파악할 수 있었다.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.25-32
• /
• 2016

지반공학에서 평면변형율을 가정하는 2차원 사면안정해석은 일반적으로 널리 사용되고 있다. 이 가정은 사면활동이 넓은 영역에 걸쳐서 발생되는 가정이므로 3차원 효과가 무시된다. 대다수 연구에서 2차원해석의 최소안전율값은 3차원해석에 비하여 작게 평가되는 보수적인 결과를 나타낸다. 최근에는 컴퓨터의 소프트웨어와 하드웨어를 포함한 해석방법의 발달로 3차원해석에 대한 요구가 커지고 있다. 본 논문에서는 원호모드, 병진모드사면을 이용하여 유한요소에 의한 2, 3차원해석 및 2차원 한계평형해석을 통하여 수치해석을 실시하였다. 해석결과 매개변수(요소망크기, 체적팽창각(dilatency angle), 경계조건, 응력이력, 모델차원)에 따른 사면안정해석에 미치는 영향을 분석하였다. 해석결과 2차원 해석보다 3차원 해석에 의한 사면의 안전율 값은 항상 크게 평가되며, W 뱡향 경계조건이 롤러지지인 경우, 사면폭에 의한 결과 차이는 없는 것으로 조사되었다.

• 한국의류산업학회지
• /
• 제4권1호
• /
• pp.19-30
• /
• 2002

The word 'lace' comes from the Latin, lacium, meaning a knot. There are two broad categories of lace: needlepoint lace and bobbin lace. Lace has enjoyed a multitude of uses, embellishing both liturgical and domestic objects. It has also played a major role in the history of western fashion, adorning the apparel of men as well as women. Lace lappets and cap crowns, cravat ends and veils were made for those who could afford them. Before the end of the sixteen century, more complex techniques were employed. The baroque period, needlepoint lace evolved from the early simple geometric patterns of punto in aria Which enhanced ruffs, to deeply scalloped designs, often referred to as collar lace, and thence to the bold and magnificent relief effects of Venetian gros point. Through the seventeenth century is noted for the infinite variety of its cravat, collar and kerchief, most of them lace trimmed and all artfully contrived for the wearer. The type of sleeve in women's dress reaching just below the elbow, ending in ruffles of lace which was called engageantes. Sometimes the ends of a fichu or headdress decorated of lace. In the nineteenth century, empress Eugenie's love of lace resulted in a marked increase in the use of that lovely, delicate fabrication. It was lavished upon sleeves, hats, capes, and handkerchieves. Entire flounces, parasols, jackets, and shawls of lace were created by skilled lace makers of Europe. By the time this magnificent piece was created, most lace was being produced by machine. Today, the tradition of handmade lace continues, but glorious examples are no longer made. However, the techniques have been taken up and revitalized within the fiber art movement.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.1-8
• /
• 2004

The microstructural features and mechanical behavior of directionally solidified $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fibers after extended beat treatment in oxidizing environment were investigated. The fiber was grown continuously by an Edge-defined Film-fed Growth (EFG) technique. The microstructure was characterized using X-Ray Diffraction (XRD) and Scanning Electron Microscopy(SEM). The microstructure of the fiber in the as-fabricated state consists of highly oriented colonv and fine lamellar microstructure along the fiber axis. Tensile strength of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber remained unchanged with heat treatment at temperatures between $1200^{\circ}C$ and $1500^{\circ}C$ up to 300h. The weibulls modulus remained fairly constant after extended thermal exposure. The fracture toughness and crack propagation behavior were investigated. The fracture toughness ($K_{1C}$) of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber in the as-fabricated state were measured to be 3.6 ${\pm}$ 0.5 MPa${\cdot}m^{1/2}$ by an indentation technique and 2.2 ${\pm}$ 0.2 MPa${\cdot}m^{1/2}$ by assuming elliptical flaw of a semi-infinite solid, respectively. The $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber showed a radial (Palmqvist) crack type and exhibited an orthotropic crack growth behavior under 100 g load.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.35-44
• /
• 1998

본 연구에서는 전류스트레스 및 필터소자의 용량저감을 고려한 다이오드 정류기의 입력LC필터 설계법을 기술하였다. 입력교류전류의 제3고조파 성분에 대하여 무한한 임피던스를 갖도록 LC병렬 공진회로와 출력측 직류콘덴서로 구성된 새로운 필터를 단위법(Per Unit)에 의해 설계하였다. 제안된 LC필터를 다이오드정류기에 적용하여 정상상태에서 실험한 결과, 입력교류전류의 제3고조파성분을 8.8〔%〕로 감소시켰으며, 입력역률은 종전의 표준형의 입력역률이 0.76인데 비하여 0.913으로 개선시켰다. 또한 필터소지자의 전압.전류용량감소와 함께, 설계된 입력LC필터는 다이오드 정류기계통에 악영향을 미치지 않았으며, 따라서 종래의 표준형 LC필터에 의한 방법과 비교하여 제안된 방법이 83.5〔%〕의 저용량의 필터로도 고역률의 정류가 가능함을 입증하였다.