• Textile Coloration and Finishing
• /
• v.3 no.2
• /
• pp.34-42
• /
• 1991

The effects of electrolyte on dyeing properties of cotton fiber with Congo Red have been studied at 90, 70 and $40^{\circ}C$. Each dyeing carried into an infinite bath with $1\times10^{-4}$ mol/l of Congo Red and with various concentration of electrolytes. The results obtained from this study were as follow; 1. The equilibrium adsorption of dye $(C_\infty)$ values decreased with increasing dyeing temperature, $C_\infty$ values increased in the order KCl>NaCl>LiCl. 2. The values of apparent diffusion coefficients $(D_a)$ increased with increasing dyeing temperature, but $D_a$ values decreased in the order KCl$D_a$ values decreased with increasing electrolyte concentration. 4. Effect of electrolytes decreased with increasing dyeing temperature. 5. The values of standard affinities of dyeing $(-\triangle\mu^{\circ})$, the standard heats of dyeing $(-\triangleH^{\circ})$, and the standard entropies $(-\triangleS^{\circ})$, increased in the order KCl>NaCl>LiCl. 6. Equilibrium adsorption isotherm curve were Freundlich type, and in the Equation y=a.x$^{n}$ , the values of a and n increased in the order KCl>NaCl>LiCl. 7. The value of $-\triangle\mu^{\circ}$, $-\triangleH^{\circ}$, and $-\triangleS^{\circ}$, decreased with increasing electrolyte concentration.

• Journal of Biosystems Engineering
• /
• v.35 no.1
• /
• pp.21-30
• /
• 2010

This study was performed to develop an active tire pressure control system that can adjust tire pressure to the optimum level according to traveling and working condition of agricultural tractor. For the development of active tire pressure control system, pneumatic supplier, solenoid valve block including pneumatic supply line, infinite rotation type pneumatic supplier with rotary joint unit, tire pressure transceiver module and control algorithm were developed. Also, tire simulator was developed. Using this tire simulator, the feasibility of each part constructing actual system was tested by checking the performance. The average communication success ratio was 98.3% between tire pressure transmitter and receiver module according to the various tire rotational speed and data receipt position of receiver module. The communication performance of the developed transmitter and receiver module was very stable in any condition. The tire pressure control system was accomplished by using the proportional control algorithm in this study. Also tire pressure control performance of developed control system was analyzed by using the tire simulator. As a result of control performance analysis to the developed system, the developed control system took 307 seconds to inflate agricultural tractor's tire from 50 kPa to 180 kPa. In opposite case, it took 210 seconds. Also it was able to control the tire pressure accurately under ${\pm}0.9%$ (FS) in any condition.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.48-57
• /
• 2013

With the environmental changes of the times, consumers expect new experiences and seek hotels with various leisure facilities and sensuous design rather than existing static and conservative ones. In particular, boutique hotels connected to all the aspects of lifestyle including architecture, culture, art and fashion are trying out a variety of designs through collaborations in the ways of enhancing their brand images in the design industry. Design through collaboration between different fields has an infinite possibility of breaking from classicism and creating a new type of space in hotel design. Thus, this study attempts to analyze a few cases of boutique hotels by collaborative design that has recently been vitalized and to seek for a direction by suggesting the methods of utilizing design by collaboration for the hotel industry that will further be expanded in the future. For this purpose, first, the theories of collaboration and boutique hotel will be reviewed and the characteristics will be drawn out based on the examples of boutique hotels to which collaborations have been applied by enterprises and designers. By analyzing and classifying the cases of the domestic and foreign boutique hotels through practical experiences among the hotels recently designed by the collaborations between enterprises and designers based on the basic frame of the five characteristics drawn out: identity, symbolism, temporality, locality and interaction, objective values will be drawn out and data for presenting the future orientation will be built. In the Korean hotel industry that is gradually expanding, boutique hotel designs through the appropriate collaboration between enterprises and designers should be considered for the extensive development of the future hotel industry.

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.156-165
• /
• 2009

We theoretically derive the set of general paraxial zoom locus equations for all zoom lens systems with finite object distance, including the infinite object distance case, by using the Gaussian bracket method and matrix representation of paraxial ray tracing. We make the zoom locus program by means of a numerical calculation method according to these equations in Visual Basic Language. Consequently, the solutions of this method can be consistently and flexibly used in all types of zoom lens in the step of initial design about zoom loci. Finally, in order to verify the justification and usefulness of this method, we show that two examples, such as $M_{4a}$ and $M_{4h}$ types of 4 groups, and one example, $M_{5n}$ type of 5 groups, which are very complicated zoom lens systems, can be rapidly and diversely traced through various interpolations by using this program.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.181-186
• /
• 2012

In this paper, we describe the synthesis of robust and non-fragile Kalman filter design for a class of uncertain linear system with polytopic uncertainties and filter gain variations. The sufficient condition of filter existence, the design method of robust non-fragile filter, and the measure of non-fragility in filter are presented via LMIs(Linear Matrix Inequality) technique. And the obtained sufficient condition can be represented as PLMIs(parameterized linear matrix inequalities) that is, coefficients of LMIs are functions of a parameter confined to a compact set. Since PLMIs generate infinite LMIs, we use relaxation technique, find the finite solution for robust non-fragile filter, and show that the resulting filter guarantees the asymptotic stability with parameter uncertainties and filter fragility. Finally, a numerical example will be shown.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.417-422
• /
• 2010

In this study, the resistance performances of barge are analyzed by model tests and computation using CFD to investigate the flow characteristics around a barge in still water. The model tests are carried out in infinite depth in Inha Technical College Circulation Tank to observe the resistance and the numerical simulations based on VOF(Volume of Fluid) method are performed to analyze the flow around the barge. We have selected two barge models to investigate the flow characteristics according to the different type of barges. The experiments are carried out with the models from 5kts to 10kts(designed speed 7kts) considering the effect of adverse and favorable current. The numerical simulations are performed to analyze the flow and resistance characteristics of barge in the full loaded condition with the target speed and compared with the experimental data to confirm the reliability of the numerical method. The result was that the difference of resistance with 25% occurred at low speed and EHP increased rapidly from 7kts.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.25-32
• /
• 2016

The two-dimensional (2D) analysis is widely used in geotechnical engineering for slope stability analysis assuming a plane-strain condition. It is implicitly assumed that the slip surface is infinitely wide, and thus three-dimensional (3D) end effects are negligible because of the infinite width of the slide mass. The majority of work on this subject suggests that the 2D factor of safety is conservative (i.e. lower than the 'true' 3D factor of safety). Recently, the 3D finite element method (FEM) became more attractive due to the progress of computational tools including the computer hardware and software. This paper presents the numerical analyses on rotational mode and translational mode slopes using the 2D and 3D FEM as well as 2D limit equilibrium methods (LEM). The results of the parametric study on the slope stability due to mesh size, dilatency angle, boundary conditions, stress history and model dimensions change are analysed. The analysis showed that the factor of safety in 3D analysis is always higher than that in the 2D analysis and the discrepancy of the slope width in W direction on the factor of safety is ignored if the roller type of W direction conditions is applied.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.19-30
• /
• 2002

The word 'lace' comes from the Latin, lacium, meaning a knot. There are two broad categories of lace: needlepoint lace and bobbin lace. Lace has enjoyed a multitude of uses, embellishing both liturgical and domestic objects. It has also played a major role in the history of western fashion, adorning the apparel of men as well as women. Lace lappets and cap crowns, cravat ends and veils were made for those who could afford them. Before the end of the sixteen century, more complex techniques were employed. The baroque period, needlepoint lace evolved from the early simple geometric patterns of punto in aria Which enhanced ruffs, to deeply scalloped designs, often referred to as collar lace, and thence to the bold and magnificent relief effects of Venetian gros point. Through the seventeenth century is noted for the infinite variety of its cravat, collar and kerchief, most of them lace trimmed and all artfully contrived for the wearer. The type of sleeve in women's dress reaching just below the elbow, ending in ruffles of lace which was called engageantes. Sometimes the ends of a fichu or headdress decorated of lace. In the nineteenth century, empress Eugenie's love of lace resulted in a marked increase in the use of that lovely, delicate fabrication. It was lavished upon sleeves, hats, capes, and handkerchieves. Entire flounces, parasols, jackets, and shawls of lace were created by skilled lace makers of Europe. By the time this magnificent piece was created, most lace was being produced by machine. Today, the tradition of handmade lace continues, but glorious examples are no longer made. However, the techniques have been taken up and revitalized within the fiber art movement.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2004

The microstructural features and mechanical behavior of directionally solidified $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fibers after extended beat treatment in oxidizing environment were investigated. The fiber was grown continuously by an Edge-defined Film-fed Growth (EFG) technique. The microstructure was characterized using X-Ray Diffraction (XRD) and Scanning Electron Microscopy(SEM). The microstructure of the fiber in the as-fabricated state consists of highly oriented colonv and fine lamellar microstructure along the fiber axis. Tensile strength of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber remained unchanged with heat treatment at temperatures between $1200^{\circ}C$ and $1500^{\circ}C$ up to 300h. The weibulls modulus remained fairly constant after extended thermal exposure. The fracture toughness and crack propagation behavior were investigated. The fracture toughness ($K_{1C}$) of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber in the as-fabricated state were measured to be 3.6 ${\pm}$ 0.5 MPa${\cdot}m^{1/2}$ by an indentation technique and 2.2 ${\pm}$ 0.2 MPa${\cdot}m^{1/2}$ by assuming elliptical flaw of a semi-infinite solid, respectively. The $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber showed a radial (Palmqvist) crack type and exhibited an orthotropic crack growth behavior under 100 g load.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.35-44
• /
• 1998

In this paper, input LC filter design of diode rectifiers considering filter V A rating reduction has been propoesd. It consisted of an input LC parallel resonent tank whose inductor and capacitor values are se$.$ lected so that the input filter presents an infinite impedance to harmonic input ac current component. The operation of proposed input filter has been analyzed in detail under steady state conditions. Performance evaluation and related design data have been provided on Per Unit basis for the proper implementation of diode rectification system. Finally, Detailed input and output current analysis has shown that the proposed input filter yield high quality input ac current waveforms, in particular, high input power factor values and more reliabilty which reducing the V A rating of passive components as compared to the standard type LC filter.filter.