• 한국분말재료학회지
• /
• 제7권4호
• /
• pp.205-211
• /
• 2000

Distribution of $Y_2BaCuO_5$ (211) Particles within $YBa_2Cu_3O_{7-x}/$ (123) grains of melt infiltration processed YBCO oxides was investigated. Processing parameters were a temperature, atmosphere (air and $O_2$) and initial 211 size. The 211 particles were distributed randomly within the 123 grains when the initial 211 size was large, while they made x-like pattern and/or butterfly-like patterns when the 211 size was small. The 211 patterns were more clearly observed in the samples prepared at higher temperatures and under $O_2$ atmosphere. The 211 distribution was explained in terms of the interfacial energy relationship among the solid, particle and melt.

• Clinics in Shoulder and Elbow
• /
• 제24권3호
• /
• pp.135-140
• /
• 2021

Background: We hypothesized in this study that the characteristics of retear cases vary according to surgeon volume and that surgical outcomes differ between primary and revision arthroscopic rotator cuff repair (revisional ARCR). Methods: Surgeons performing more than 12 rotator cuff repairs (RCRs) per year were defined as high-volume surgeons, and those performing fewer than 12 RCRs were considered low-volume surgeons. Of the 47 patients who underwent revisional ARCR at our clinic enrolled in this study, 21 cases were treated by high-volume surgeons and 26 cases by low-volume surgeons. In all cases, the interval between primary surgery and revisional ARCR, degree of "acromial scuffing," number of anchors, RCR technique, retear pattern, fatty infiltration, retear size, operating time, and clinical outcome were recorded. Results: During primary surgery, significantly more lateral anchors (p=0.004) were used, and the rate of use of the double-row repair technique was significantly higher (p<0.001) in the high- versus low-volume surgeon group. Moreover, the "cut-through pattern" was observed significantly more frequently among the cases treated by high- versus low-volume surgeons (p=0.008). The clinical outcomes after revisional ARCR were not different between the two groups. Conclusions: Double-row repair during primary surgery and the cut-through pattern during revisional ARCR were more frequent in the high- versus low-volume surgeon groups. However, no differences in retear site or size, fatty infiltration grade, or outcomes were observed between the groups.

• Investigative Magnetic Resonance Imaging
• /
• 제25권1호
• /
• pp.23-34
• /
• 2021

Purpose: Differentiating between glioblastoma and solitary metastasis is very important for the planning of further workup and treatment. We assessed the ability of various morphological parameters using conventional MRI and diffusion-based techniques to distinguish between glioblastomas and solitary metastases in tumoral and peritumoral regions. Materials and Methods: We included 38 patients with solitary brain tumors (21 glioblastomas, 17 solitary metastases). To find out if there were differences in the morphologic parameters of enhancing tumors, we analyzed their shape, margins, and enhancement patterns on postcontrast T1-weighted images. During analyses of peritumoral regions, we assessed the extent of peritumoral non-enhancing lesion on T2- and postcontrast T1-weighted images. We also aimed to detect peritumoral neoplastic cell infiltration by visual assessment of T2-weighted and diffusion-based images, including DWI, ADC maps, and exponential DWI, and evaluated which sequence depicted peritumoral neoplastic cell infiltration most clearly. Results: The shapes, margins, and enhancement patterns of tumors all significantly differentiated glioblastomas from metastases. Glioblastomas had an irregular shape, ill-defined margins, and a heterogeneous enhancement pattern; on the other hand, metastases had an ovoid or round shape, well-defined margins, and homogeneous enhancement. Metastases had significantly more extensive peritumoral T2 high signal intensity than glioblastomas had. In visual assessment of peritumoral neoplastic cell infiltration using T2-weighted and diffusion-based images, all sequences differed significantly between the two groups. Exponential DWI had the highest sensitivity for the diagnosis of both glioblastoma (100%) and metastasis (70.6%). A combination of exponential DWI and ADC maps was optimal for the depiction of peritumoral neoplastic cell infiltration in glioblastoma. Conclusion: In the differentiation of glioblastoma from solitary metastatic lesions, visual morphologic assessment of tumoral and peritumoral regions using conventional MRI and diffusion-based techniques can also offer diagnostic information.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 추계학술대회
• /
• pp.128-131
• /
• 1993

In order to get the basic data for the study of the heat stimulation of burning moxa, the pattern of combustion temperature, which is one of the important factors of thermal characteristics, was measured by density of cone moxa along the time procedure. The following results have been obtained 1) The pattern of combustion temperature by moxa burning was classified into input period which means the infiltration of heat into the area and output period which means the radiation of heat from the area. The input period consists of preheating and heating periods, while the output period consists of heat retaining and cooling periods. 2) The pattern of combustion temperature showed the same type or curve, which was not influenced by the moxa weight. However, Its pattern gradient are varied by density. It is considered that the pattern of combution temperature is primarily influenced by the rate of combustion temperature, gradient temperature and duration of combustion.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.200-203
• /
• 2008

Water mist fire suppression system utilizes the fire suppression features such as cooling of fire source, dilution of ambient oxygen, and shielding of radiation heat with the evaporation of microscopic water droplets. The momentum of water mist is relatively low and the infiltration of water mist to the fire source is not effective. In addition to lower penetration force, the evaporated water vapor is liable to decline to limited portion of fire source due to its light weight and sparse density. On the other hand, the cycling water mist system is expected to improve the penetration force of water mist as well as the dilution coverage capability with the stratified spray characteristics. At this paper we present the analyzed fire suppression capability of intermittent water spray pattern by use of FDS which is computational fire dynamics fire model. We expect this analysis shall be supportive to the development of the prototype of water mist nozzle.

• 한국농공학회지
• /
• 제31권2호
• /
• pp.104-115
• /
• 1989

In an effort to clarify the wetted patterns of sandy loam soil under trickle irrigation conditions, the distance of wetted zone, infiltration capacity and soil wetted patterns, etc. were measured by gypsum block as soil moisture sensor located every 5 cm vertically and horizontaly in the soil bin under the such conditions as a). irrigation rates set to 2, 4, 6, 8 liters per hour b). total amount of water applied fixed to 14.62 liters per soil bin c) the hearing force of soil measured by plate penetrometer ranging from 1.04 to 1.22kg/cm$_2$ The results can be summarized as follows ; 1. The wetted distance in horizontal direction(H), the wetted distance in vertical direction(D), the horizontal infiltration capacity (iH) and the vertical infiltration capacity(in)could by explained as a function of time t. 2. The horizontal wetted distance (H) is explained by an exponetial function H= a$.$ t where b was found ranging from 021 to 026 under surface trickle irrigation, which was considered a lotlower than the classical value of 0.5 and these measurements were indifferent to the increasing irrigation rates. 3. As for the surface trickle irrigation where horizontal infiltration capacity(iH) is explained as iH = A $.$ t h, the coefficient A increases with respect to irrigation rates within the limits of 0.89~1.34. 4. In terms of surface trickle irrigation of the ratio of Dm Which is maximum vertical wetted distance to Hm, which is maximum horizontal wetted distance, found to be within range of 1.0 to 1.21. It was also noted that the value of Dm decreses when irrigation rates increases while the value of Hm changes the opposite direction. 5. The optimum location of sensors from emitter for surface trickle irrigation should he inside of hemisphere whose lateral radius is 28~30cm long and vertical radius is 10~12cm long. The distance between emitters should be within 60cm long. 6. In the study of vertical wetted distance( D) where D= a $.$ tb, the exponential coefficient b ranged from 0.61 to 0.75 in surface trickle irrigation, and from 0A9 to 0.68 for subsurface trickle irrigation. These measurements showed an increasing tendency to with respect to irrigation rates. 7. In case of vertical infiltration capacity( in), where iD= A $.$ t 1-h, the coefficient A for surface trickle irrigation found to be within range of 0.16 to 0.19 and did not show any relationships with varying degree of irrigation rates. However, the coefficient was varying from 0.09 to 0.22 and showed a tendency to increase vis-a-vis irrigation rates for subsurface trickle irrigation, in contrast. 8. In the observation of subsurface trickle irrigation, it was found that Dm/Hm ratio was within 1.52 to 1.91 and showed a decreasing tendency with respect to increasing rates of irrigation. 9. The location of sensors for subsurface trickle irrigation follows same pattern as above, with vertical distance from emitter being 10~17cm long and horizontal 22~25cm long. The location of emitter should be 50 cm. 10.The relationship between VS which is the volume of wetted soil and Q which is the total amount of water when soil is reached field capacity could be explained as VS= 2.914Q0.91and the irrigation rates showed no impacts on the above relationship.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.300-310
• /
• 1996

Recently, there have been attempts to obstruct the dentinal tubules and remove the smear layer by way of laser irradiation in the root canal during endodontic treatment. This treatment was designed to make the root canal to be nonporous. Using 33 extracted single rooted teeth, 30 teeth were divided into 3 groups (10 each), and 3 teeth were used as samples for SEM. Using Nd : YAG laser, the control group was not irradiated, experimental group l(1W group) was irradiated with 1W, 15pps, 15sec., 3 times, 6.7mJ and experimental group 2(3W group) was irradiated with 3W, 15pps, 15sec., 3 times 20mJ. Thereafter the roots were immersed in methylene blue for 8 hours, and the dye infiltration pattern was observed under stereomicroscope and canal wall surface change was observed under SEM. The results are as following ; 1. As a result of evaluating the dye infiltration rate of the apical and middle 1/3, there was significant difference between control group and 1W group, control group and 3W group and there was no significant difference between 1 W group and 3W group. 2. In each group, as a result of comparing the dye infiltration rate of the apical and middle 1/3, there was no significant difference in control and 1W group but significant difference in 3W group. 3. In the control group smear layer was scarecely found and many dentinal tubules were found to be open. 4. In the 1W group, the number of dentinal tubules were decreased and gradual changes of the dentin surface could be seen and 3W group, almost no dentinal tubules could be found and the dentin surface was changed a little more and showed signs of partial fusion.

• 한국임상수의학회지
• /
• 제20권4호
• /
• pp.496-500
• /
• 2003

A one-year-old male Japanese Chin with anorexia, retching, dyspnea and continuous coughing was brought to the Veterinary Teaching Hospital, Chungbuk National University. Chest radiographs showed moderate regional alveolar pattern with mild interstitial patterns in the caudo-dorsal lung fields and the ill-defined mass in the perihilar area which is consistent with perihilar lymphadenopathy. Although the dog showed severe eosinophilia in the complete blood count, the serum profile values were within normal ranges. There was no indication of any parasite infestation in the direct and floatation examination of feces, skin scraping test and heartworm examination. There was no growth of bacteria and fungi in the selected media such as Mueller Hinton broth, Sabouraud Dextrose agar and Potato Dextorse agar, which were inoculated with tracheal fluid collected using endotracheal tube and cultured for 3 days. In the tracheal fluid smear, most prominent cells were eosinophils, which are a almost 80% of total cells and other cells such as leukocytes, neutrophils and ciliated colummar cells were also observed. Any parasite was also not detected in its smear. Prednisolone (PDS; 1 mg/kg, BID SC), aminophylline (10 mg/kg, TID IV) and nebulization with gentamicin (50 mg) plus saline (3 ml) were given for 1 week. At 3rd day of treatment, blood eosinophil value was return to normal range and pulmonary condition was also improved. The allergen test with serum performed during therapy was positive in the 19 index including milk, barley, tomato pomace, catfish, bonito, house dust and wool, and borderline in 10 index including wheat, house dust mites and house fly. The patient is responding well to PDS therapy. Based on these findings, a possible diagnosis of pulmonary infiltration with eosinophils was made in this dog.

• 대한의생명과학회지
• /
• 제25권3호
• /
• pp.282-287
• /
• 2019

Skin flap necrosis remains a major complication of reconstructive surgery. Euterpe oleracea Mart., popularly known as "acai berry" contains hydroxybenzoic acid, antioxidant polyphenolics and anthocyanins. These and other compounds within the acai berry confer anti-inflammatory and anti-oxidative effects. In this current study, we evaluated the protective effect of acai berry extracts on survival of random-pattern skin flaps in a murine model by histologic analysis. ICR mice were subjected to skin elevation surgery and orally administered acai berry extract (100 mg/kg) daily for 7 days. Tissues were stained with hematoxylin-eosin or Masson's trichrome to observe tissue integrity and collagen deposition. In addition, $TGF-{\beta}$ and VEGF was stained by immunofluorescence to determine anti-inflammatory cell infiltration and neovascularization, respectively. We found a decrease in inflammatory cell infiltration and increase in collagen deposition in the acai berry extract treated mice compared to control mice. Immunofluorescence staining reveal a higher number of $TGF-{\beta}$ positive cells and enhanced VEGF staining in the acai berry extract treated mice. The results from this study indicate that oral uptake of acai berry extract can promote healing and survival of surgical skin flaps in mice providing an augmentative therapeutic approach to enhancing skin flap survival.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.277-278
• /
• 2018

Improvement of insulation performance of buildings is a major part. Adiabatic method The adiabatic method minimizes the heat loss of the building. External insulation uses insulation to prevent fire. Ambient air hazards are less prone to fire. When a fire occurs, a phenolic pattern is formed and bond strength with the wall increases. EPS insulation and phenol foam were used to compare external heat transfer and external heat transfer. The heat transfer properties of phenolic foam and styrofoam were evaluated as follows. In the mortar and styrofoam structure, the problem of styrofoam reaching the burning point occurred before the collapse of the mortar, and the phenol foam had a problem in that when the direct fire was continued on the phenol foam. The characteristics of continuous infiltration appeared. In the case of mortar and phenol foam + styrofoam, the heat penetrated into the interior due to the shrinkage due to the shrinkage of the carbon screen on the phenol foam. However, when reinforced with glass mesh on the outer surface, And to reduce infiltration.