• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.64-69
• /
• 2007

This study is to develop heat recovery system using high performance heat pipe heat exchanger for Middle-high temperature range industrial exhaust gas. The naphthalene is used as working fluid of heat pipe in this study. Single naphthalene heat pipe could transport over 2,000 watts with $0.05^{\circ}C/W$. The heat pipe heat exchanger consist of 50 naphthalene heat pipes recovered 62 kW when over $400^{\circ}C$ gas exhausted and the maximum recovered heat rate was 173 kW in this study.

• 한국해양공학회지
• /
• 제14권4호
• /
• pp.62-97
• /
• 2000

Recently the research for utilization of waste heat produced from electric power plants, casting factories, heat treating factories or commercial are being afforded by the need for energy saving. The objective of this study is to develop a thermoelectric generation system which unused energy from close-at-hand sources such as garbage incineration heat and industrial exhaust etc. into electricity. This paper a thermoelectric technology on a optimum system design method and efficiency and cost effective thermoelectric element on order to extract the maximum power output from energy conversion of waste energy. It is shown that the longitudinal stresses of module contacted with two point constrained Al tubes could be released more than those with a one-point constrained.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권1호
• /
• pp.12-18
• /
• 2003

Recently the research for utilization of waste heat produced from electric power plants, casting factories, heat treating factories or commercial building are being afforded by the need for energy saving. The objective of this study is to develop a thermoelectric generation system which converts unused energy from close-at-hand sources such as garbage incineration heat and industrial exhaust etc. into electricity. This paper presents a thermoelectric technology on a optimum system design method and efficiency and cost effective thermoelectric element on order to extract the maximum power output from energy conversion of waste energy. It is shown that the longitudinal stresses of module contacted with two point constrained AI tubes could be released more than those with a one-point constrained.

• 한국지열·수열에너지학회논문집
• /
• 제7권1호
• /
• pp.59-64
• /
• 2011

Feasibility study on energy saving system by utilizing exhausted heat from subway, which is one of the unused energy, was carried out. General heat source system using absorption chiller-heater was used for comparing to the energy saving system, and payback period method using initial cost and running cost of two systems, was used to perform economic estimation. Payback period was about ten years, and this period might be shortened if nation's economic support enact.

• 한국환경과학회지
• /
• 제22권3호
• /
• pp.281-289
• /
• 2013

For the purpose of evaluating the eco-efficiency(EE) on surplus heat generated from industrial process, techniques of life cycle assessment are adopted in this study. Because it can be indicated both environmental impacts and economic benefits, EE is well known as a useful tool for symbiosis network on the sustainable development of new projects and businesses. To evaluate environmental impacts, the categories were divided into two areas of resource depletion and global warming potential. It can be seen that environmental impact increased a little but much higher economic benefit on the company, environmental performance and economic value were improved on the apartment by the district heating, respectively. In result, eco-industrial park(EIP) project on surplus heat should be found sustainable new business because the EE was in the area of fully positively eco-efficiency and, moreover resource depletion was taken place than the reduction of greenhouse gas.

• 분석과학
• /
• 제26권4호
• /
• pp.276-286
• /
• 2013

국내 유해폐기물의 적정 관리를 위해 폐유 및 액상연료 공정에서 발생한 폐기물 중 규제 무기물질류의 배출특성을 조사하였다. 사업장은 올바로시스템에 등록된 폐기물 배출업체를 대상으로, 유럽폐기물 분류체계(EWC, European Waste Catalogue)의 폐유 및 액상연료 공정(EWC 13)과 유사한 폐기물 발생업체를 선정하였다. 조사대상 사업장 37 개 업체를 현지 방문하여 원료, 생산제품, 생산 공정, 폐기물의 종류 및 배출과정을 조사하고 생산 공정에서 배출되는 51 개의 폐기물을 채취하여 무기물질류 16 항목(Cd, Pb, Cu, Hg, As, CN, Cr, $Cr^{6+}$, Ba, Be, F, Ni, Sb, Se, V, Zn)에 대한 함량분석을 수행하였다. 분석결과, 모든 공정에서 발생된 폐기물에서 주로 Sb가 검출되었고, 6~419(평균 98) mg/kg의 농도 범위를 나타내었다. EWC 판정 절차를 통해 국내 폐유 및 액상연료 공정에서 발생된 폐기물을 판정한 결과, EWC 중분류 24공정 중 절대유해폐기물로 분류해서 관리해야할 공정은 16 개, 상대유해폐기물로 관리가 필요한 공정은 8 개로 판단되었다. 폐기물의 배출특성을 통해 유해물질 함유 자료를 확보하고 폐기물 목록에 대한 데이터베이스를 구축함으로써 유해폐기물의 안전처리를 통한 환경오염을 방지할 수 있을 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2786-2793
• /
• 2009

최근 화석에너지 고갈과 환경규제 강화로 신 재생에너지 개발 및 보급이 시급해지고 있다. 여러 가지 신재생 에너지 중 폐기물을 이용하는 방법이 에너지원의 잠재적 가치를 비교하였을 때 가장 유망한 에너지원으로 인정되고 있으며, 그 중에서도 폐기물을 고체연료로 가공하는 고형연료가 현실적이고 가장 경제적인 방법으로 인정받고 있다. 그러나 산업폐기물의 종류별 연소 시 발생되는 유해가스(HCl, Dioxin 등)와 중금속 등이 문제점으로 지적되고 있다. PVC, alkali metal chloride, alkaline earth metal chloride 등은 Cl을 발생시키는 대표적 물질이며, Cl는 열회수 장치의 부식과 같은 문제를 유발한다. 본 연구에는 두지역의 산업단지에서 고형연료의 재료가 되는 산업폐기물에 미량 존재하는 중금속 성분을 분석하였으며, Cl과 S의 농도를 분석한 결과 B산업단지의 농도가 A산업단지의 농도보다 약간 높게 나타났다. 이를 바탕으로 산업폐기물의 발생원과 연료로서의 RDF의 성능을 개선하기 위한 기초자료로 활용될 수 있을 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.565-570
• /
• 2001

Annually, Taiwan generates approximately 2 million tons of inorganic wastes in the form of sludge, fly ash and slug. To increase the added value of waste and maintain the increasingly insufficient supply of natural gravel, large public construction projects account for this large demand each year. future architectural trends are leading towards high-rise buildings. In light of the above, Center for Environmental, Safety and Health Technology Development, Industrial Technology Research Institute has developed the technology of manufacturing cold-bonding, sintering and bloating types of lightweight aggregates with a specific gravity ranging between 0.7~1.7, water absorption rate < 30%. The lightweight aggregate verified by physical property tests can be used as a substitute for the natural aggregate, which generally appears in replacing gravel in concrete, soundproofing and heat insulation materials. Doing so would not only moderate waste disposal problems, but also achieve the goal of resource recovery.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.53-60
• /
• 2011

The effect of exhaust heat recovery system can be evaluated by two well known method. First method is to measure the time duration from engine start under cold coolant temperature till coolant get warmed. By this methodology coolant warming duration can be index of warm-up effect. Second method is to analyze heat balance of the engine during warm-up phase under steady engine operation so that wasted energy by losses such as cooling and exhaust can be index of warm-up effect. This study focused on evaluation of warming-up effect by both methodology above mentioned using 2L SI engine under from idle to 2000rpm steady condition. Results, idle operation showed low heat recovery efficiency but under higher engine speed condition, remarkable heat recovery efficiency improvement was observed. In 2000rpm steady condition, warm-up duration of engine is decreased by exhaust heat recovery system.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.325-335
• /
• 1992

In this work, direct contact 4-stage fluidized bed heat exchanger is experimentally studied to develop a new type of heat exchanger which recovers the energy contained in the high temperature waste gas exhausted from the industrial furnaces. A sand is used as a heat transfer medium in this experiment. To determine the optimum operating condition, 11 different perforated plates which have a different free area ratio with different hole diameter are used in the experiment. From the room temperature experiment, the pressure drop which is caused by fluidized bed formation is observed. The high temperature experiment is carried out to seek the optimum operating condition of high heat efficiency at low heat exchanger operation cost. The results of experiment are as following. The pressure drop in the high temperature condition can be predicted from the results of the room temperature experiment. And Nusselt number becomes smaller due to the increased interference between sand particles as Reynolds number increases when the dilute phase fluidized beds are formed in nigh temperature condition. But heat transfer amount through the total sand surface area become larger due to the large resident amount of sand. Considering the heat transfer amount and the heat exchanger operation cost, perforated plates which have either a 30% or 35% of free area ratio with 15mm of hole diameter are best fitted for our goal of this work. The values of .phi. which is a dimensionless number representing the absorption heat amount per unit sand rate are in the range from 0.4 to 0.5, when Reynolds number of waste gas ranges from 25-30 with these perforated plates.