• Journal of Preventive Medicine and Public Health
• /
• v.23 no.4 s.32
• /
• pp.391-403
• /
• 1990

In order to assess the degree of atmospheric pollution and noise and to contribute the health improvement of residents in Pusan, the author measured the levels of CO, $SO_2,\;NO_2$, TSP, HCHO and noise in 8 areas (industrial, residential and park areas) from January to March in 1990. The results were as follows : 1. Sasang industrial area was significantly higher($2.85{\pm}0.84ppm$) in the average concentration of CO than other areas. However, there no areas to affect the human body in terms of CO concentration. 2. In general, industrial area was significantly higher ($0.134{\pm}0.084ppm$) in the average concentration of $SO_2$ than other areas, and it was the lowest ($0.009{\pm}0.005ppm$) in the Namchon-dong area. 3. Industrial ($0.033{\pm}0.009ppm$) and residential area ($0.029{\pm}0.004ppm$) were significantly higher in the average concentration of $NO_2$ than Park area ($0.009{\pm}0.001ppm$). However, there were no areas to affect the human body in terms of $NO_2$ concentration. 4. Sasang industrial area was the highest ($580.4{\pm}415.26{\mu}g/m^3$) at the average concentration of TSP and Hae-Un Dae area was the lowest ($97.22{\pm}37.86{\mu}g/m^3$). But TSP concentration showed the level to affect the human body in most areas. 5. Industrial area was significantly higher ($2.25{\pm}1.15ppb$) in the average concentration of HCHO than residential ($1.13{\pm}0.25ppb$) and park area ($1.33{\pm}0.20ppb$). 6. Industrial area was significantly higher ($77.28{\pm}6.92dB(A)$) in the level of noise than residential ($65.77{\pm}3.76dB(A)$) and park area ($64.65{\pm}5.25dB(A)$). In comparison with regional Standard Noise Level, howeverm the average noise level of residential and park area was higher than that of the Standard. In general, the level of pollution of industrial complex areas was relatively higher than those of residential and park areas. Among the industrial areas, sasang area was worst in most items. Both $SO_2$ and TSP showed the level to affect the human body in most of studied areas. It is necessary to install a new Air Quality Standard for HCHO to screen our environmental pollution.

• International Journal of Railway
• /
• v.5 no.4
• /
• pp.139-143
• /
• 2012

In Korea, almost 700 industrial parks are under operation. Generally, industrial parks consist of national industrial parks and local industrial parks which are managed by a central government and by local governments respectively. The developing countries such as Korea, China and Vietnam etc. have constructed many industrial parks, which result in the change of land use pattern and also affect future trip demands. Therefore, in estimating traffic demands, it is very important to consider the industrial park development. This study aims to improve the methodology in estimating a freight trip generation rate with the data based on a nationwide commodity freight survey. The result showed that it is desirable to apply freight trip generation rate by the industry sector in estimating freight trip generations and using the production area of firm as an indicator. Specially, the reliability of the rates through a survey could be made sure because a sample rate based on firms in industrial parks was over 25% and the response rate was over 67%. The sample rate and response rate are very superior as compared to surveys conducted in many other countries. Because industrial parks have significant effects on forecasting transportation demand in pre-feasibility studies of transport and logistics projects, it is expected that the accuracy of freight trip demands would be improved through the results of this study.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.242-242
• /
• 1996

• Bulletin of the Korean Chemical Society
• /
• v.10 no.5
• /
• pp.475-476
• /
• 1989

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.71-78
• /
• 2011

Korean government has promoted nationwide Eco Industrial Park (EIP) project to recycle by-products and wastes in industrial park since 2010. However, the corresponding management is insufficient to support the project. Considering the efficiency and effectiveness, GIS-based management can be an alternative of the current status. This study has focused on the construction of recycling network based on EIP using GIS approach. Two industrial parks located in Gyeonggi province were selected as study sites. GIS-based spatial location analysis was performed to determine the optimal location of recycling company, and to identify linkage of one manufacture to the other manufacturers based on the types of waste. Also, the optimal network for recycling of waste heat was established. Finally, the feasibility of the current GIS-based recycling network was established by performing benefit-cost analysis.

• 한국약용작물학회:학술대회논문집
• /
• 2010.10a
• /
• pp.157-158
• /
• 2010

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.100-109
• /
• 1993

This study was performed to evaluate the asbestos exposure levels and variations in textile, brake lining manufacturing and slate manufacturing industries. For this study, fifteen plants of brake lining manufacturing industry, 7 plants of textile industry, and 2 plants of slate manufacturing industry were selected and surveyed. Geometric means (GMs) of airborne asbestos concentrations in textile, brake lining manufacturing, and slate manufacturing industries were 1.42 f/cc(0.07-6.1O f/cc), 0.19 f/cc(<0.01-2.67 f/cc) and 0.08 f/cc(0.02-0.67 f/cc), respectively. In textile industry overall GMs of airborne asbestos concentrations in plants with less than 50 workers and in plants with more than 50 workers were 1.60 f/cc and 0.3 f/cc, respectively. Therefore, the size of plant showed some difference in the airborne asbestos concentrations. Three out of 7(42.9%) exceed the Korean standard, 2 f/cc, and every plant exceed the USA standard, 0.2 f/cc of the OSHA-Permissible Exposure Level(OSHA-PEL). Especially, one plant showed the highest average concentration of 2.87 f/cc. In brake lining manufacturing industry, the plants with less than 50 workers showed 0.22 f/cc. The plants with more than 50 workers showed 0.18 f/cc. All plants showed the exposure level below the Korean standard. Five of 15 (33.3%) were above the OSHA-PEL. One plant showed the highest average concentraton of 0.84 f/cc. In slate manufacturing industry, the average exposure level was 0.08 f/cc, and all of the plants were below the Korean standard and the OSHA-PEL.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.23-24
• /
• 2002

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.787-788
• /
• 2013

• Journal of the Korean Magnetic Resonance Society
• /
• v.2 no.2
• /
• pp.113-119
• /
• 1998