• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.1-12
• /
• 1995

Under accelerated industrial developments environment pollution comes out to be very stirious. Especially the ions of heavy metal from wastewater, even if they are minimal, accumulated in ecology circle and do finally injury to human health. The general process for removal of heavy metals include coagulation and following sedimentation, ion -exchange and active carbon adsorption and sedimentation that applicate in popular, needs the expense of coagulant the additional treatment of sludge on the general process of coagulation and sedimentation. It is also a serious problem that the second pollution caused by coagulant. However chelating adsorption that uses natural chelating high- molecular compound has not pollution problem Among chelating high- molecules, the diminishing chitin that contained in crustaceans as crawfish and crab in our country with affluent water resources are easy to get. So it is advantageous to use this ubiquitous material for removing heavy metals because we could reuse natural resource. In this research, the author tested the effectiveness of the adsorption and removal of heavy metal ions by chitin and its derivatives. Chitin and cellulose became beads and used as flocculant, in this test. The results are as follows . First, bead showed higher removal ratio than powder in the comparative test on adsorbents such as chitin, chitosan and cellulose. Secondly, in the variety test by the kinds of adsorbent and time. chitosan bead and cellulose bead that showed the highest removal ratio. One hour need to remove the ions of heavy metal. Thirdly, the results of the adsorption degree test by pH revealed high removal ratio adsorption of chitin, cellulose and chitosan bead in alkalin condition but chitosan bead in acidic condition.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.2
• /
• pp.89-100
• /
• 2007

Object: The purpose of this study was to survey the government official support status of the agricultural diseases, injuries and accidents among Korea and foreign countries and to suggest the agricultural policy of Korea. Methods: For this purpose, we analyzed the current national management support status among four foreign countries and Korea about agricultural diseases, injuries and accidents of farmers. For the foreign countries and the national support current status of agricultural diseases, injuries and accidents, related literature such as books, theses, articles, and web documents from the government organization of each countries were collected and analyzed. Key words for web-site and web documents were agricultural diseases, injuries, and accidents, government official system, safety and health, farmer's welfare, and farmer's official support system. UK, United States of America, France, and Japan were selected as the foreign countries' cases. Results and Conclusions: Implications for the agricultural diseases, injuries and accidents derived from the reviews among foreign countries and Korea were as follows: governmental supports should include (1) efforts on unifying administrative systems, (2) special support and management systems focusing on special subjects such as the agriculture that have been neglected, (3) aligned strategies including vision, goals, long-term plans about national safety and health projects, (4) development of supporting systems considering the features of agriculture, (5) systemized national surveys about occupational injuries and accidents for basic statistics and national studies, (6) active prevention efforts of agricultural diseases, injuries and accidents, and (8) specialized funds for safety and health of Korean farmers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.4
• /
• pp.301-308
• /
• 2012

Objectives: To evaluate the pulmonary toxicity of 2 Korea asbestos(chrysotile, anthophyllite), Sprague-Dawely rats were exposed to 2 mg domestic asbestos by intratracheal instillation(IT). Methods: Lung function of rats was analyzed by pressure transducer(MAX1320, Buxco Electronics, USA). The effects of 2 mg asbestos(chrysotile ; $8,814,244{\times}10^{6}$ fibers/mg, average diameter 0.08 ${\mu}m$, average length 4.39 ${\mu}m$, anthophyllite ; $5,182{\times}10^{6}$ fibers/mg, average diameter 0.95 ${\mu}m$, average length 7.29 ${\mu}m$) on pulmonary function and pathological changes were evaluated at after a single IT. Lung function and histopathological evaluation were assessed in 5 animals from each group at each time point. Results: Due to differences in fiber numbers, chrysotile induce marked lung pathology and lung function change than anthophyllite at the same mass dose. Chrysotile showed notable thickening of interstitial areas surrounding the alveolar ducts and terminal bronchioles. Conclusions: On a mass dose basis, chrysotile that have 1,700 times numbers of fibers per unit weight than anthophyllite produced a greater persistent lung injury than anthophllite for at least 4 weeks after exposure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.231-237
• /
• 2017

Objectives: This study was conducted to determine firefighters' work-related accident rate and investigate the factors affecting their on-site safety. Methods: We developed a web-based self-reported questionnaire designed to inquire into firefighters' work-related accident experience and the factors (4M; Man, Machine, Media, Management) affecting firefighters' on-site safety. We distributed questionnaires to all members of firefighting organizations in South Korea by e-mail and 9,149 were returned, resulting in a response rate of 23.1%. Results: Fifteen point seven percent of the respondents reported work-related injuries within the past one year, and 35.1% answered that current accident investigation reports are not helpful for preventing the same accident from recurring. Among the 4M factors, the one most affecting firefighters' on-site safety in the order of priority is the Man factor, followed by Machine, Media, and Management. However, the results from detailed sub-categorical factors showed some differences. 'Lack of human resources', one of the Management factors, was the most influential (70.3%), followed by 'worn-out equipment' under the Machine factor (67.2%). The viewpoint of elements of the Man factor including 'forgetting instructions' and 'fatigue and illness' were significantly different according to firefighters' rank. The higher the firefighter's rank, the more they answered 'forgetting instructions,' while the opposite was the case for 'fatigue and disease'. Conclusions: The present firefighters' accident investigation report needs to be improved, and the 4M method could prove very useful. In addition, it is necessary to set up a proper firefighters' accident investigation and prevention system.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.1
• /
• pp.45-50
• /
• 2020

The number of elevators in Korea has surpassed 700,000 units in 2019, which is the 8th in the world by number of installed units and 3rd in the world by new units. The word 'lift' is a representative word, and the category includes elevators, escalators, dumb waiters, and moving walks. Those who live in the city will experience using elevators once or twice a day, and these elevators are becoming an indispensable means of transportation when using high-rise apartments or subways. However, such a convenient elevator also has a lot of risks that threaten the safety of the user and actually cause many accidents every year. In particular, escalators (including moving walks), which account for as little as 5% of all elevators, account for 70% of all elevator accidents. According to Heinrich's chain of thought theory, accidents are caused by a combination of factors, which are divided into five stages: Stage 1: Genetic Factors and Social Environment, Stage 2: Individual Defects, Stage 3: Unsafe behavior and Unsafe conditions, Stage 4: Accident, Stage 5: Injury. Heinrich said that three of these five phases, unsafe behavior and unsafe conditions, require safety management and efforts to prevent accidents. In escalator accidents, the analysis of accident cases that have occurred so far will be related to unsafe behaviors and unsafe conditions, and the effective management of these causes of accidents will enable safer and more convenient use of escalators. This study analyzed accident cases of elevator users, focusing on escalator accidents over the last 10 years (2010 ~ 2019), and safety management to prevent safety accidents of elevator users by analyzing the behavior of actual users and questionnaires of experts in related fields. The method was studied.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.2
• /
• pp.130-138
• /
• 1999

The lower extremity injuries are extremely increasing with the development of industrial & transportational technology. For the lower extremity injuries that result from high-energy forces, particularly those in which soft tissue and large segments of bone have been destroyed and there is some degree of vascular compromise, the problems in reconstruction are major and more complex. In such cases local muscle coverage is probably unsuccessful, because adjacent muscles are destroyed much more than one can initially expect. Reconstruction of the lower extremity has been planned by dividing the lower leg into three parts traditionally The flaps available in each of the three parts are gastrocnemius flap for proximal one third, soleus flap for middle one third and free flap transfer for lower one third. Microvascular surgery can provide the necessary soft tissue coverage from the remote donnor area by free flap transfer into the defect. Correct selection of the appropriate recipient vessels is difficult and remains the most important factor in successful free flap transfer. Vascular anastomosis to recipient vessels distal to the zone of injury has been advocated and retrograde flow flaps are well established in island flaps. Retrograde flow anastomosis could not interrupt the major blood vessels which were essential for survival of the distal limb, the compromise of fracture or wound healing might be prevented. During 5 years, from March 1993 to Feb. 1998, we have done 68 free flap transfers in 61 patients to reconstruct the lower extremity. From analysis of the cases, we concluded that for the reconstruction of the lower extremity, free flap transfer yields a more esthetic and functional results.

• Health Policy and Management
• /
• v.16 no.4
• /
• pp.128-146
• /
• 2006

The objective of this paper is to examine the proportion and characteristics of non-emergent patients at emergency departments. The observational survey was conducted using a structured form used by emergency medicine specialists or senior residents on June 7-20, 2005. 1,526 patients at ten emergency centers took part in this study. The structural form contained type of insurance, route and means of emergency department (ED) visit, triage based on the Manchester Triage Scale(MTS)-modified criteria, emergency level based on the government defined rule, type of emergency centers (Regional Emergency Medical Center; REMC, Local Emergency Medical Center; LEMC, Local Emergency Agency; LEA), as well as patient's general information. Data were analyzed using SAS statistical program(V.8.2). Descriptive analysis was performed to describe the magnitude of non-emergent patients. ${\chi}^2-analysis$ and logistic regression analysis was performed to identify the nonurgent patients' characteristics. In the MTS-modified criteria, we found a 15.3% rate of non-emergent patients. This rate differed from that of non-emergent patients obtained using government's rule. In particular, there were inaccuracies in the definition of government rule on non-emergent patients, so it is necessary to apply the new government rule regarding classification of non-emergent patients. There were significant differences in the rate of non-emergent patients according to type of ED, means of ED visit, time to visit, and insurance. Non-emergent patients are more likely to visit a D-type ED(LEA having less than 20,000 patients annually), not to use ambulance, to have 'Automobile Insurance, Industrial Accident Compensation Insurance, or pay out-of-pocket'. Non-emergent patients tend to visit ED due to illness rather than injury. Further studies on the development' of triage scale and reexamination of the government's rule on emergency visits are required for future policy in this area.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.217-225
• /
• 2009

Recently, intensive research efforts are world-widely forced on the development of sport shoes improving both the injury protection and the playing performance by taking kinesiology and biomechanics into consideration. However, the success of this goal depends definitely on the reliable evaluation of the dynamic responses of sport shoes and human foot, particularly the landing impact characteristics. It is because the landing impact force is a main source of unexpected injuries and influences the playing performance in court sport activities. This paper addresses the application of finite element method to the evaluation of landing impact characteristics of barefoot and several representative court sport shoes in running. In order to accurately reflect the coupling effect between human foot and shoes accurately, we construct a fully coupled three-diemensional foot-shoe FEM model which does not rely on the independent experimental data any more. Through the numerical simulation, we assessed the reliability of the numerical FEM model by comparing with the experimental results and investigated the landing impact characteristics, such as GRF, MIF, acceleration and frequency responses, of representative court sport shoes.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.23 no.2
• /
• pp.231-238
• /
• 2011

Attacin is an insect antibacterial protein that plays an important role in immune response to injury and infection. In this report, we have isolated and characterized of cDNA encoding for the attacin from the immunized larvae of swallowtail butterfly, $Papilio$ $xuthus$. A full length cDNA of $P.$ $xuthus$ attacin was obtained by employing annealing control primer (ACP)-based differential display PCR and 5' RACE. The complete $P.$ $xuthus$ attacin cDNA was comprised of 949 bp encoding a 250 amino acid precursor. It contains a putative 18 amino acid signal peptide sequence, a 42 amino acid propeptide sequence, and a 190 amino acid mature protein with a theoretical molecular mass of 19904.01 and a pI of 9.13. The putative mature protein of $P.$ $xuthus$ attacin showed 48-52% and 24-30% identity in amino acid sequences with that of lepidopteran and dipteran insects, respectively. Semiquantitive RT-PCR results revealed that the transcript of $P.$ $xuthus$ attacin gene was up-regulated at significant levels after injection with bacterial lipopolysaccharide (LPS). We sub-cloned cDNA fragment encoding mature $P.$ $xuthus$ attacin into the expression vector, highly expressed in $E.$ $coli$ BL21 cells, and its antibacterial activity was analyzed. Recombinant $P.$ $xuthus$ attacin evidenced considerably antibacterial activity against Gram-negative bacteria, $E.$ $coli$ ML 35 and $Klebsiella$ $pneumonia$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.84-92
• /
• 2005

This paper is concerned with optimum design of a center-pillar assembly induced by the high-speed side impact of the vehicle. In order to simulate deformation behavior of the center-pillar assembly, simplified finite element model of the center-pillar and a moving deformable barrier are developed based on results of the crash analysis of a full vehicle model. In optimization of the deformation shape of the center-pillar, S-shaped deformation is targeted to guarantee reduction of the injury level of a driver dummy in the crash test. Tailor-welded blanks are adopted in the simplified center-pillar model to control the deformation shape of the center-pillar assembly. The thickness of each part which constitutes the simplified model is selected as a design parameter. The thickness of parts which have significant effect on the deformation mechanism are selected as design parameters with sensitivity analysis based on the design of experiment technique. The objective function is constructed so as to minimize the weight and lead to an S-mode deformation shape. The result shows that the simplified model can be utilized effectively for optimum design of the center-pillar members with remarkable saving of computing time.