• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.2
• /
• pp.79-83
• /
• 2006

We successfully extirpated all four hemopoietic organ-wing disc complexes of the fifth instar larvae of Bombyx mori, and found that most of the treated silkworms could still develop into the moths. We investigated the changes of the circulating hemocytes and evaluated the effects of extirpation on the hemopoiesis. The results showed that proliferation of circulating hemocytes was sufficient to allow development of the silkworms which complexes were totally extirpated. We also found that hemopoietic organ-wing disc complexes extirpation might cause a certain hemopoietic compensation of the remainder complexes during early spinning. Exogenous hormones such as $20-{\beta}-hydroxyecdysone$ and juvenile hormone analog had a positive effect on hemocytes proliferation.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.5
• /
• pp.557-561
• /
• 1993

The interaction of vanadium(V) with various a-hydroxycarboxylate ligands in aqueous solution at pH 3.2 have been studied by $^{51}V$ and $^{13}C$ NMR spectroscopies. From the results it is supposed that vanadates mainly form the octahedral complexes with lactate, 2-hydroxybutyrate, glycerate, and malate. While, vanadates form the trigonal-bipyramidal complexes with glycolate, tartarate, and 2-hydroxy-3-methylbutyrate, and tetrahedral complexes with pyruvate(diol), 2-hydroxyisobutyrate, and 2-hydroxy-3-methylbutyrate. The bipyramidal products are formed as monomeric compounds. The octahedral products are formed as dimeric compounds with no evidence for a significant proportion of the monomeric derivatives. The complexes are mainly formed through the coordination at the carboxylate and the 2-hydroxyl groups of the ligands.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.4
• /
• pp.208-216
• /
• 2016

This paper reports the results of a field evaluation which used sampling and analytical methods to determine the levels of airborne hexavalent chromium Cr(VI) in major industrial complexes in Korea over a seven year period (2007-2013). Cr(VI) concentrations were determined using cellulose filter sampling and ion chromatography analysis. In order to validate the analytical performance of these methods, studies were also carried out to investigate data quality control (QC) parameters, such as the method detection limit (MDL), repeatability, and recovery efficiencies. The average concentrations of Cr(VI) for the nine industrial complexes in Korea were in the range of 0.09 to $1.40ng/m^3$, which is similar to of the concentrations in other industrial areas around the world. The impacts of Cr(VI) emissions from industrial areas on Cr(VI) concentrations in neighboring-residential areas were considerably low, and the dispersion of Cr(VI) from industrial areas to residential areas was estimated to be 'not-significant'. Cr(VI) levels were not affected by seasonal variation, which suggests that chromium was emitted continuously from the industrial sources throughout the year. The concentration of Cr(VI) measured accounted for 0.7 to 9.4 percent of the total chromium level, which is a low percentage compared to those in other urban areas around the world. This is the first report in an international journal of a field study conducted in Korea to determine the concentration of Cr(VI) in the ambient air of industrial and residential areas.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.242-247
• /
• 1999

The characteristics of waste heat effluents from 11 industrial complexes of 7 areas were analyzed to investigate the possibility of waste heat recovery of huge amount of waste heat producing from various industrial complexes. This study presents a part of the research work for the industrial waste heat for development of energy integrated network system in broad city area, which will utilize industrial waste heat for residential and commercial areas, where they are located at some distances from the complexes. The amount of waste heat from the investigated complexes was detected as 148,913 TOE/year. However, It was analyzed 83% of the waste heat was analyzed the temperature range from 0$^{\circ}C$ to 200$^{\circ}C$. Also, it was evaluated that 82% of waste heat was exhausted by flue gases. Especially, the characteristics of waste heat for the areas where most heat concentrated, such as Tae-gu industrial complex, Ul-san petrochemitry complex, Yio-chun petrochemistry complex, and Chun-ju industrial complex were investigated more precisely. Total amount of waste heat discharged from these four areas were analyzed 114,402 TOE/year, which was occupied as 77% of the total waste heat for the studied areas, and 87% of the waste heat from the industries was exhausted by flue gaseous phase and temperature range was from 0$^{\circ}C$ to 200$^{\circ}C$ 18.1 million TOE/year waste heat was released from the fossil fuel power plants, however 95% of waste heat was analyzed as cooling water from surface condensers at power plants. The temperature range was measured from 27$^{\circ}C$ to 34$^{\circ}C$, which are unable to utilize due to its low temperature. Otherwise, 5% (894,800 TOE/year) waste heat released from power plants were observed as flue gas, which temperature ranged from 90$^{\circ}C$ to 170$^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.77-79
• /
• 2003

New cities and industrial complexes are being developed actively because of the government policies aiming population distribution and vitalization of construction industry. To determine the investment amount, number of power lines and substations for stable power supply to newly developed residential and industrial complexes, accurate estimation of power demand is necessary. This paper propose standards for the estimation of power demands for power company and construction company to settle the debates surrounding this issue. Through a survey and analysis of existing areas, new standards that will enable more accurate estimation of power demands in new cities complexes to be developed in the future are established by calculating the average load density, load factor, utilization factor by area, use and building size after dividing the facilities into building type and the areas into the areas planned to be developed and the areas not yet planned to be developed.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.271-276
• /
• 2000

The research centers on the health risk assessment of airborne toxic metals in Taejon third and fourth industrial complexes. Total suspended particulates were collected on glass microfibre filters by high volume air samplers. Fifteen toxic metals including 6 carcinogenic metals were analyzed by ICP-MS and ICP-AES after the pre-treatment of mixed acid extraction. The following results were summarized from the research : 1) the concentrations of TSPs were $17.7{\sim}219.6{\mu}g/m^3$ while the arithmetic mean concentration was $101.7{\mu}g/m^3$; 2) the arithmetic mean concentrations of human carcinogens such as arsenic, hexavalent chromium and nickel subsulfide were 10.22, 6.96 and 6.42 $ng/m^3$, respectively while those of probable human carcinogens such as beryllium, cadmium and lead were 0.13, 3.41, 97.65 $ng/m^3$, respectively; 3) the point risk estimate for the inhalation of carcinogenic metals was $1.5{\times}10^{-4}$, which was much higher than a risk standard of $10^{-5}$; 4) approximately 93% of the cancer risk were to the inhalation of human carcinogens, arsenic and hexavalent chromium, which should be properly managed in Taejon third and fourth industrial complexes.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.850-862
• /
• 2007

This study was carried out to survey the actual conditions of wastewater treatment facilities to obtain basic data for the management of wastewater from industrial complexes in Chungcheongnam-do province. Wastewater production flow per site area by watersheds was $49.2m^3/km^2/d$ for Sapgyoho, $8.1m^3/km^2/d$ for Anseongcheon, $5.7m^3/km^2/d$ for Seohae, and $2.9m^3/km^2/d$ for Geumgang. Sapgyoho showed 75% of the total production flow, which was the highest value, Geumgang showed 4% of total flow, which was the lowest value. Average total extra rate as production flow/capacity flow in the wastewater treatment facilities for industrial complex is 49%. Considering by watersheds, the extra rates of Seohae, Geumgang, Anseongcheon, and Sapgyoho, are 73%, 65%, 62%, and 33% respectively. This means that the design of capacity flow in wastewater treatment facilities was too large. Effluent concentration of wastewater treatment facilities did not exceed discharge limit mostly. The removal efficiency rate for water quality item was 90% in BOD, 70% in COD, 80% in SS, 30 to 80% in TN, and 20 to 90% in TP, so the organic removal was good, but the nutrient removal was low and interval of variation was high. The removal efficiency rate of the agricultural was industrial complexes is lower than the national and local complexes. The construction cost of the wastewater treatment facilities in Chungcheongnam-do was $1,756Won\;per\;m^3$, treatment cost was $189Won\;per\;m^3$, and they were about two times and 1.2 times higher than the nation-wide cost, respectively. The treatment cost consists of 39% for man power, 21% for chemical, 16% for power, 11% for sludge treatment, and 13% for others.

• Journal of Environmental Impact Assessment
• /
• v.30 no.5
• /
• pp.317-327
• /
• 2021

Industrial complexes have have been played an important role in various aspects such as national industrial development, economic growth. However, it is a cluster of manufacturing facilities which has a great impact on the surrounding area and the overall domestic environment during the operation of the facility. In this study, environmental influences and siting characteristics of industrial complexes were investigated based on the environmental impact assessment report from 2009 to 2019. The development tendency of industrial complexes is continuous decline, and major development areas are Gyeonggi, Gyeongsang and Chungcheong areas. We also confirmed that the average area of defenestration due to industrial complex is on the decline. Furthermore, the residential area and educational facilities, and the exposed population affected by industrial complex is constantly increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5971-5978
• /
• 2013

The aim of the study is to suggest the development type and the land-use model of smart green multi complexes focused on the lesson for future smart green complex in Korea. For the study, the concept and the development aspects are reviewed as a theoretical research and the development types of smart green multi complexes are surveyed based on its functional distribution. The types of multi-complexes are classified in three categories of small city, neighborhood and small housing estate regarding its size. As a result of the research, the land-use model of smart green multi complexes according to its types are suggested under consideration of Korean situation.

• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.129-138
• /
• 1980

The formation constants of the mixed-ligand complexes in the Cd(II), Cu(II) and Pb(II)-Trien-OH system were studied by polarograph. The formation constant $(log{\beta}_{ij})$ was determined at $25^{\circ}C$ in the ionic strength of 0.1. It was also confirmed that the mixed ligand complexes in this system were formed above pH 10.2, 10.5 and 9.0 for Cu(II), Cd(II) and Pb(II) by the calculation of the distribution for complexes at the various pH. Masking of Cd(II) by conversion to anionic EDTA-complexes has been used to separate Cu(II) from Cd(II) through passage of a combined Trien-EDTA solution on an cationic resin column. The optimal condition for the separation of Cu(II) from Cd(II) is confirmed at the pH range above 9.0, not only by considering the theoretical equation of the conditional-exchange-constant of metal on the cation exchange resin,but also by calculating the distribution of the mixed ligand complexes in the resin at the various pH with computer. By analyzing the synthetic sample of Cu(II) and Cd(II) with a EDTA masking at pH 9.5, it is found that the results of the experiment are satisfied with the theoretical value.