• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.157-163
• /
• 2009

In every aspect of automotive production, quality, productivity and cost are crucial matters. The purpose of this research is to improve the productivity of slip yoke for automotive propeller shaft. This paper presents how to redesign the component that currently manufactured as forged one body type. Attention was focused on not only reducing processing time but insuring durability of the component simultaneously. In Automotive, propeller shaft is the device for transferring power from engine to axle via transmission, and the slip yoke is one of the main parts in the product. Propeller shafts are subject to torsion and shear stress, they thus need to be strong enough to bear the stress.

• Journal of the Society of Disaster Information
• /
• v.2 no.1
• /
• pp.113-127
• /
• 2006

The suggestions that follow are about the Qualitative Improvement of private security Industrial. First, in legal and institutional policy, new establishment by law for private security and more support from government is asked. Moreover, the restructuring or M&A between petty companies and the pricing for security service should be performed. Second, in the structural aspect of private security industry, the professional education center for private security guards should be established and the terms of payment and welfare should be improved to the level above standard. In addition, it should be achieved to change the public to have a new and correct understanding of private security and develope the specialized parts suited to the characteristic and ability of each companies. Third, the construction of operating system for private security service should be achieved; recruit system for competent security guards, marketing strategy and enforcement system, widely known confidence to client, normal training system for security guards and post management system for client. This is also to be suited to the characteristic of each companies.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.12a
• /
• pp.157-168
• /
• 2004

The effects of pulsation in a pulsating flow through a rectangular channel have been investigated by Particle Image Velocimetry in both laminar and turbulent flow conditions. PIV results on a square channel (aspect ratio:1) have been reported on the cases of Reynolds number Re=80 in laminar and Re=8800 in turbulent region. For both in the laminar and turbulent regions, the influence of the pulsation onto the magnitude changes of the average velocity was negligible. In the turbulent region, the magnitude profiles of the stream-wise pulsating component obtained by the theoretical analysis based on the Stokes analogy were slightly different from the experimental ones due to the influence of the turbulent viscosities onto the pulsating flows.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.1
• /
• pp.29-40
• /
• 2014

Conceptual Modeling is the process of abstracting a model from a real or proposed system. It is probably the most important aspect of a simulation study. Relate works show that the elementary developers devoted little time to understanding how the systems actually worked, namely they didn't build appropriate conceptual model. Thus, the result of simulation is inconsistent because it depends on developer's competence. Although many researchers suggested various techniques enabling developer to build conceptual model, there were several limitations. In this study, to overcome the limitations of existing techniques, we proposed COMBINE-DES (COnceptual Model BuildINg framEwork using ontology for Discrete Event Simulation). The COM-BINE-DES supports expediting the conceptual modeling with Solution ontology generated by Domain ontology and Simulation ontology. Moreover, it provides consistent simulation result regardless of repeated modeling.

• IE interfaces
• /
• v.9 no.3
• /
• pp.64-71
• /
• 1996

In the survivability and simplicity aspect, SONET Self-healing Ring(SHR) is one of the most important schemes for the high-speed telecommunication networks. Since the ring capacity requirement is defined by the largest STS-1 cross-section in the ring, load balancing is the key issue in the design of SONET SHR. Recently, most of the research on load balancing problem have been concentrated on the SONET single-ring case. However, in certain applications, multiple-ring configuration is necessary because of the geographical limitations or the need for extra bandwidth. In this paper, the load balancing problem for SONET dual-ring is considered by assuming symmetric inter-ring demands. We present a linear programming based formulation of the problem. Initial solution and improvement procedures are presented, which solves the routing and interconnection between the two rings for each demand. Computational experiments are performed on various size of networks with randomly generated demand sets. Results show that the proposed algorithm is excellent in both the solution quality and the computational time requirement. The average error bound of the solutions obtained is 0.26% of the optimum.

• Journal of Industrial Convergence
• /
• v.14 no.1
• /
• pp.39-45
• /
• 2016

This paper deals with the consideration of mathematical models with regards to growth of cluster and firms by reviewing the Metcalf and Breuner's articles. prior studies have been argued the phenomenon of local industrial clusters and districts. Several concepts have been adopted to support the success of and changes to these clusters and firm growth. Through the review of two papers, evolution of both cluster and firm growth may be achieved in terms of utilizations of the different local aspects and mechanisms. This paper supports the theoretical back bone with regards to the regional cluster policy implementing in Korea for the purpose of regional developments. In particular, a mathematical model that, on a more abstract level, captures the fundamental dynamic structure of all the observed mechanisms. On the basis of this model, the emergence and evolution of local clusters can be described. Also this model has given that the knowledge sharing between firms has an important role to firms and cluster' growth.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.746-752
• /
• 2015

This study investigates the effects of aspect ratio (transport length-to-width) on diffusive-convection for physical vapor transport processes of $Hg_2Cl_2-NO$ system. For a system with the temperature difference of 20 K between an interface at the source material region and growing crystal interface, the linear temperature profiles at walls, the total molar fluxes at Ar = 2 are much greater than Ar = 5 as well as the corresponding nonuniformities in interfacial distributions due to the effect of convection. The maximum total molar flux at the gravitational acceleration of 1 $g_0$ is greater twice than at the level of 0.1 $g_0$, where g0 denotes the gravitational acceleration on earth. With increasing aspect ratio from 2 to 5, a diffusive-convection mode is transited into the diffusion mode, and then the strength of diffusion is predominant over the strength of diffusive-convection.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.1-27
• /
• 2013

The purpose of this study was to find out the areas and their constitute elements of new apprenticeship through the expert of vocational education to improve the growth potential in the field of industry. Through the three times Delphi research process final composing areas and elements(total 6 areas and 41 sub-elements) of new apprenticeship were extracted. Followings are specific study results of 41 sub-elements for the 6 areas. In area A(Technology Skill aspect) total nine sub-elements were deducted as follows. Technology skill's field appling ability, new technology skill's acquisition, quality assurance ability, research development ability, material management using ability, problem solving ability, core technology skill understanding ability, idea's imagery expressing ability, creative design ability. In area B(Institutional aspect) total five sub-elements were deducted as follows. Flexible human material support, precise division of works, objective result assessment, institutionalization of responsibilities and liabilities between teacher and student, institutionalization of duty invention reward. In area C(Affective aspect) total eight sub-elements were deducted as follows. Manners and cooperation between teacher & student and peer, values for job, basic attitude for technology, job ethic sense, respect of other organization, active action to organization change, attitude of technology successor, service mind. In area D(Self-improvement aspect) total nine sub-elements were deducted as follows. Self evaluation and reflection, cultivate of organization understanding, career planning and developing ability, sound philosophy of life, communication ability, decision making ability, prepare of individual competence enhance system, self-control ability improvement, reaction of unexpected situation. In area E(Knowledge aspect) total four sub-elements were deducted as follows. Basic knowledge of relevant area, knowledge of new technology & preceding technology, fusion and relocation of knowledge, practical knowledge. In area F(Environmental aspect) total six sub-elements were deducted as follows. Awareness of business environment, understanding of education and practice environment, understanding of apprenticeship's business demand, connectivity of region community, adapt ability of labor market's change, awareness of society environment change.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.885-892
• /
• 2012

Coastal zone management indicators are being used as an important means of decision making in the process of policy establishment for integrated coastal management and implementation, and these indicators are very useful tools that enable the evaluation of the coastal zone management from an integrated perspective, the understanding and analysis of interactions according to each department. Accordingly, most of organizations in international society and advanced coastal states tend to develop coastal zone management indicator system in order to check current coastal environment, social and economic status, also to grasp effectiveness of the coastal zone management policy. In this research, therefore, the characteristics of coastal zone management indicator system was drawn through understanding of strength and weakness, and conducting comparative analysis of the coastal zone management indicator system according to each level having classified domestic and international coastal zone management indicator system into three aspects at large: natural and environmental aspect; social and economic aspect; and network aspect. As a result, following features were drawn as the common characteristics among the cases in the advanced coastal states: the management means for realization of sustainable coastal zone management; scientific decision making tools for various stakeholders; evaluation means for effectiveness of coastal zone integrated management; and dualization of coastal zone management indicator system; etc. Lastly, based on these common values revealed in the domestic and international coastal management indicator system, a suggestion for correct establishment of the domestic coastal management indicators was proposed in the regional aspect.

• Korean Journal of Cognitive Science
• /
• v.20 no.4
• /
• pp.481-506
• /
• 2009

The purpose of the present research was to examine whether the attention mechanism employs physical or represented location of the cue and target. To achieve this, we have employed the paradigm of facilitation of response as well as inhibition of return. In the experiments, valid and invalid conditions were defined by the position consistency of the cue and the target in the aspect of either physical or represented location. We used auditory cue and visual target in Experiment 1 while visual cue and auditory target in Experiment 2. As a results, in Experiment 1, effect of facilitation of response in valid condition was found when the valid/invalid conditions were defined in the aspect of represented location. In Experiment 2, effect of facilitation of response in valid condition was found when the valid/invalid conditions were defined in the aspect of represented location. In all the other conditions, no effect was found when the conditions were defined in the aspect of physical location. No effects of inhibition of return were found in Experiment 2. These results imply the possibility that attention mechanism operates based on objects' represented location rather than on their physical location. More importantly, the present research suggests that it is necessary to separate represented location from physical location of the target and the cue in the experiment of facilitation of response and inhibition of return in the future.