• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.43-50
• /
• 1978

In order to compare the effectiveness of different phosphorus forms (pulverized as regranulized) and formulars (compound fertilizers) of fused phosphate and to compare the effectiveness of boron from different forms (straight borax, granulized with fused phosphate and included in compound fertilizer), a field experiment was conducted on a relatively fertile upland soil using soybean as a test crop. Results are summarized as following. 1. Yield of soybean was significantly higher in the plots fertilized with P when compared to check plot (no p). However, no significant differences were observed among the different forms or formulars of fused phosphate, indicating that the regranulization or formulation of compound fertilizer did not influence the effectiveness of phosphorus. 2. The application of boron, regardless of its formular, brought about higher B content in plant tissue and higher grain yield. There was a tendency that boron contained in ragranulized fused phosphate was more effective than straight borax. The results also indicated that when boron is to be included in NPK compound fertilizer, its content should be at the least 1.5% as $B_2O_3$. 3. The effectiveness of boron appeared as increased number of pod, higher B, and Ca contents in plant and the amounts of uptake of these elements by soybean. 4. The analysis of soil after the experiment indicated that different forms or formulars of fused phosphate were similarly effective in increasing the available P, Ca, and Mg contents in the soil. 5. Slight increase in available B contents in the experimental plot soils applied with boron fertilizer was observed after the trial.

• 대한공업교육학회지
• /
• v.39 no.2
• /
• pp.1-18
• /
• 2014

This study took existing invention intellectual property related textbooks being utilized in secondary vocational education, analyzed the formation status of 'key learning elements' reflection ratio and drew optimum key learning elements formation ratio by invention intellectual property education content required in secondary vocational education in the future. For this, the study task was set up as 'what kind and how much of invention intellectual property key learning elements are in the invention intellectual property textbook education content now and what is the desirable ratio of each key learning elements in the future'. To resolve this task, 3 specialists analyzed the invention intellectual property education content reflection status and optimum reflection ratio by invention intellectual property education content required in the future is suggested by Delphi survey. The results of this study are as following. First, the result of analysis on invention intellectual property key learning elements included in the invention patent recognition books being utilized in secondary vocational education was that the books included all key learning elements; however, some textbooks have the trend of concentrating in D area (problem-solving activities). Second, the result of analysis on the reflection ratio by invention intellectual property education content area in the invention patent recognition books being utilized in secondary vocational education was that there was the trend in most textbooks that they concentrate in intellectual property creation area; while some textbooks deal with intellectual property protection area and intellectual property utilization area. Regarding by achievement type, knowledge area was main in all textbooks. Meanwhile, function area is dealt in invention patent basic, invention and problem-solving and design textbooks. Attitude area is not dealt or is dealt insufficiently in most textbooks. Third, the optimum reflection ratio of invention intellectual property education key learning elements required in secondary vocational education in the future as obtained by specialists' delphi survey was that it is necessary to decrease D (problem-solving activities) 17.7% area, E(invention fusion knowledge) 2.9% area, K(patent application) 6.9% and L(patent information investigation) area 9.6%. Regarding the optimum reflection ratio of invention intellectual property education content, it is suggested that the invention literacy area 3.1%, intellectual property creation area 4.5% and intellectual property protection area 10.6% would be decreased; while intellectual property utilization area 17.7% would be increased. Regarding optimum reflection ratio of achievement type, it is suggested that knowledge area 52% would be decreased; while function area 32.3% and attitude area 19.6% would be increased.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.2
• /
• pp.15-24
• /
• 2011

Modern enterprises should concentrate their efforts on continuous improvements in focusing their development in the core areas of business and to reduce their expenses and to enhance the quality of service for customers. The enterprises should focus on their core business while outsourcing the non-core areas of business to external specialists for the purpose of reducing cost. In South Korea, the enterprises are becoming increasingly interested in outsourcing their logistics function, especially in using IT technologies to the 3PL. The underlying reason for this trend is because the logistics costs of Korean businesses are much higher than that of other advanced countries. This higher logistic costs weakens the price competitiveness of Korean companies in the overseas export markets and even dampening the balance of international trade. Domestically, the higher logistics costs have the effect of raising prices in the local markets and thus affecting the local economy. Therefore a solution is urgently needed to save the logistics costs for the Korean companies in the interest of increasing national competitiveness. Outsourcing to the 3PL is becoming an attraction solution to this problem. Thanks to the increasing supply of professional logistics companies, many of the enterprises are switching to the Third Party Logistics. Nevertheless the enterprises do not yet utilize the integrated third-party logistics services on a full scale. This study analyzes present conditions and problems of the domestic third-party logistics market and suggests directions for future development. To solve the problems in the domestic third-party logistics market, four actions are recommended. First there should be new supporting policies in the laws and regulations and a system for small and medium sized companies to grow. Solutions to structural problems such as abnormal multilevel merchandising, illegal operation of private cars, and freight dumping should be implemented concurrently. Furthermore, standards for new companies entry into the market should be enhanced to allow only the competitive distribution companies to enter the market. Second, development of variety of educational programs is needed through establishing human-resource development system and specialized formal educational institution focused on this market. Third, the third party distribution companies, which seek long-term relationships with the owners of goods, should endeavor to strengthen their communications capability. Fourth, adoption of high-tech distribution system and the advent of U-Logistics, making use of RFID is urgent. This study has the limitation of objectivity because it does not include various comparative case studies about companies relating to the Third Party Logistics and domestic franchise companies. However, this study is significant to the extent that it analyzes the general present conditions and the problems of domestic Third Party Logistics and suggests recommendations for revitalization of Third Party Logistics. For future studies, analyzing the successful cases of international third party logistics companies' empirical data and studying the application into domestic franchise companies would improve the objectivity of the results. This would assist the domestic third party logistics companies not only to perform excellent domestic logistics function but also to enter into the global market for international logistics.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.208-218
• /
• 2012

Numerical simulation technique has been developed to calculate microwave backscattering from water surface. The simulation plays a role of a substitute for experiments. Validation of the simulation was shown by comparing with experimental results. Water area observations by microwave radar have been simulated to evaluate algorithms and systems. Furthermore, the simulation can be used to understand microwave scattering mechanism on the water surface. The simulation has applied to the various methods for water area observations, and the utilizations of the simulation are introduced in this paper. In the case of fixed radar, we show following examples, 1. Radar image with a pulse Doppler radar, 2. Effect of microwave irradiation width and 3. River observation (Water level observation). In addition, another application (4.Synthetic aperture radar image) is also described. The details of the applications are as follows. 1. Radar image with a pulse Doppler radar: A new system for the sea surface observation is suggested by the simulation. A pulse Doppler radar is assumed to obtain radar images that display amplitude and frequency modulation of backscattered microwaves. The simulation results show that the radar images of the frequency modulation is useful to measure sea surface waves. 2. Effect of microwave irradiation width: It is reported (Rheem[2008]) that microwave irradiation width on the sea surface affects Doppler spectra measured by a CW (Continuous wave) Doppler radar. Therefore the relation between the microwave irradiation width and the Doppler spectra is evaluated numerically. We have shown the suitable condition for wave height estimation by a Doppler radar. 3. River observation (Water level observation): We have also evaluated algorithms to estimate water current and water level of river. The same algorithms to estimate sea surface current and sea surface level are applied to the river observation. The simulation is conducted to confirm the accuracy of the river observation by using a pulse Doppler radar. 4. Synthetic aperture radar (SAR) image: SAR images are helpful to observe the global sea surface. However, imaging mechanisms are complicated and validation of analytical algorithms by SAR images is quite difficult. In order to deal with the problems, SAR images in oceanic scenes are simulated.

• Journal of Chest Surgery
• /
• v.40 no.7 s.276
• /
• pp.480-484
• /
• 2007

Background: Major vascular injuries can jeopardize a patient's life or imperil limb survival. We performed this study to establish an optimal management plan for vascular injuries. Material and Method: We retrospectively reviewed 26 cases of vascular injury that were treated at Pusan National University Hospital from May, 1999 to September, 2004. The age and sex distribution, the locations and causes of vascular injury, the diagnostic tools, the degree of injuries, clinical manifestations, the treatment modality and complications were reviewed. Result: The mean age was 39.5 years (range: $12{\sim}86$) and the male to female ratio was 22 : 4. The injuries were in 6 descending thoracic aortas, 4 femoral arteries, 4 popliteal veins and so on. The causes of injury were iatrogenic in 8 cases, traffic accident in 7, stab injury in 6 and industrial accident in 5. The most commonly used diagnostic tools were CT and angiography. The degrees of arterial injury were pseudoaneurysm in 10 cases, partial severance in 5, complete severance in 3 and thrombosis in 3. The degrees of venous injury were partial severance in 6 cases, complete severance in 2 and arteriovenous fistula in 2. The clinical manifestations were absence of pulse in 8 cases, coldness in 7, chest pain in 6, swelling in 5, bleeding in 5 and so on. The most frequently used type of revascularization was graft interposition in 11 cases. Two arteriovenous fistulae were repaired by endovascular procedure. There was one case of mortality due to multi-organ failure after hemorrhagic shock, There were three major amputations, and two of them were due to delayed diagnosis and treatment. Conclusion: A system for the early diagnosis and treatment is essential for improving limb salvage and patient mortality. As a consequence of the widespread application of endovascular procedures, the incidence of iatrogenic injuries has recently increased. Educating physicians is important for the prevention of iatrogenic injury. Easy communication and cooperation for earlier involvement of a vascular surgeon is also an important factor.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.4
• /
• pp.1125-1147
• /
• 2014

This study was conducted to develop the health evaluation indicator of pond wetland in order to enhance the quality of eco-experience in rural area. The methods for development of evaluation indicator were consisted of 3 stages; 1st, the precedent assessment protocol was applied to 10 pond wetlands in farm villages, and eco-experience expert survey was conducted to selection the evaluation item and criteria at 2nd and 3rd stages. In the results of applying the precedent assessment protocol, we found out two problems; 1) the evaluation result of value determination and conservation value were too simple, and 2) the score by evaluation items were nearly the same, because evaluation criteria in not precisely for application in rural area. These results were reflected to expert survey. According to the 1st survey results, they suggested that 4 items should be maintained, and 3 items should be deleted, and 2 items should be modified among a total of 9 times. Therefore, it was modified into the evaluation protocol having a total of 8 items. According to the 2nd survey results, the selected evaluation items were generally proper. With regard to items for assessing the health condition of pond wetland, we selected a total of 8 items; (1) Connectivity to forest, (2) Connectivity between water body and wetland connection, (3) Number of Vegetation, (4) Surround land use, (5) Interspersion of Vegetation, (6) Crossing Structure, (7) Wetland size, and (8) Outlet structure. In addition, it was suggested that accessibility, visibility, and trash were need for utilization of pond wetland as a place for eco-experience. It is expected that the selected evaluation indicator can help to utilize the pond wetland as an eco-experience space in rural area, and maintain the pond wetland as a space for conservation of biodiversity.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.80-86
• /
• 2013

In this study, the photocatalytic reactor system equipped with photocatalyst-carrying-silica-media cartridges [photocatalytic reactor system (1)] was used to perform the treatment of waste air containing malodor and volatile organic compound (VOC). The result of its performance was evaluated and compared with that of the photocatalytic reactor system equipped with commercial photocatalyst-carrying-nonwoven filter-media cartridges [photocatalytic reactor system (2)]. In case of photocatalytic reactor system (1), at the 1st stage of run the removal efficiencies of ethanol and toluene continued to be 80% and 20%, respectively. However, unlike toluene, the removal efficiency of ethanol dropped to 40% at the end of the 1st stage of run. The removal efficiency of hydrogen sulfide decreased from 100% to 90%. At the 2nd stage of its run the removal efficiency of ethanol decreased to 10% while the removal efficiencies of hydrogen sulfide and toluene remained as same as 90% and 20%, respectively, even though the inlet load of toluene increased by factor of four. In the 3rd stage of its run, as the result of application of aluminium-coated reflector film to the inner wall of photocatalytic reactor system, the removal efficiencies of ethanol and toluene increased by 5% to be 15% and 25%, respectively. In case of photocatalytic reactor system (2), at the 1st stage of its run, the removal efficiencies of ethanol, hydrogen sulfide and toluene continued to be 10%, 97% and 100%, respectively. However, at 2nd stage of its run their removal efficiencies became 5%, 95% and 2~3%, respectively, which showed that the removal efficiencies of ethanol and hydrogen sulfide decreased insignificantly while the removal efficiency of toluene dropped significantly from the perfect elimination. Moreover, the reflector film did not affect the performance of photocatalytic reactor system (2) at all. Therefore the removal of ethanol, hydrogen sulfide and toluene by photocatalytic reactor system (2) was mainly attributed to hydrophobic adsorption of its nonwoven filter media and its extent of photocatalytic removal turned out to be negligible, compared to that of photocatalytic reactor system (1).

• Journal of Life Science
• /
• v.20 no.8
• /
• pp.1241-1248
• /
• 2010

The solvent extracts of Nelumbo nucifera G. were investigated for antioxidant activities, whitening and anti-wrinkle effects to apply as a functional ingredient in cosmetic products. For their industrial application, the cosmetic products were also prepared with advanced formulation techniques such as W/O/W multiple emulsion. Total phenolic and flavonoids contents increased in Nelumbo nucifera G.-Leaf (NN-L). The electron donating ability of Nelumbo nucifera G.-Flower (NN-F) or Nelumbo nucifera G.-Leaf (NN-L) extracts were above 85% at a concentration of 500 ppm. The superoxide dismutase (SOD)-like activity of Nelumbo nucifera G. (NN-L) extracts was about 60% at a concentration of 1,000 ppm. The xanthine oxidase inhibitory effect of NN-L extract was higher than that of NN-F and NN-S extracts. The tyrosinase inhibitory effect, which is related to skin-whitening, was 36% in NN-F at 1,000 ppm. For anti-wrinkle effect, the elastase inhibition activity of NN-L was about 30% at 1,000 ppm. The results of stability test showed that W/O/W multiple emulsion (ME) containing Nelumbo nucifera G. extracts. The electron donating ability of the ME containing NN-F and NN-L were about 60% at a concentration of 100 ppm. The superoxide dismutase (SOD)-like activity of the ME containing NN-L was 30% at 1,000 ppm. The tyrosinase inhibitory effect, which is related to skin-whitening, was 34% in the ME containing NN-F at 1,000 ppm. In anti-wrinkle effect, the elastase inhibition activity of the ME containing NN-L was about 55% at 1,000 ppm.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.81-96
• /
• 2018

In this study, physicochemical properties of the natural jadeite powder were investigated and also the wash-off pack and liquid foundation containing the jadeite powder were prepared. In addition, each of these formulations was evaluated by various functional effects, sensory evaluation, stability and skin safety. In the wash-off pack, the far-infrared ray emissivity and radiation energy values increased as a function of the jadeite powder content. At a 3% jadeite powder content, the skin temperature increased by about $0.5^{\circ}C$ when the jadeite powder-containing formulation was applied to the skin. Besides, the chroma of the liquid foundation containing the jadeite powder more clearly expressed the original color of the skin. Moisture content measurements of the wash-off pack and liquid foundation containing the jadeite powder showed the highest moisture uptake of 5.0% and 63.0%, respectively. In sensorial test, the wash-off pack formulations containing the jadeite powder demonstrated improved affinities toward a skin, adherency, and moistness and combatted itching. The liquid foundation containing jadeite powder showed also improved affinities except for the coverage when compared to control formulations. Furthermore, the stability evaluation for 8 weeks revealed neither discoloration nor separation phenomenon for the formulations containing the jadeite powder. Moreover, the pH was found to be stable up to 8 weeks and the viscosity up to 4 weeks. Skin safety assessments showed that all formulations containing the jadeite powder were non-irritating. These results suggest that the jadeite powder as an inorganic pigment may serve as a new multi-functional cosmetic ingredient with stability and safety.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.133-142
• /
• 2009

This study was initiated to evaluate the K leaching potential in the green soils and K uptake by the turfgrass in the golf course using the K fertilizers. The turfgrass, Floradwarf bermudagrass(Cynodon dactylon L. $P_{ERS}$.) was planted and grown in the mixture of sand and peat moss in this lysimeter study. Eight representative K fertilizers, such as, monopotassium phosphate (MKP), KCL, $K_2SO_4$, $KNO_3$, CKCl, $CK_2SO_4$, $CKNO_3$, and 0-20-20(liquid) were used in this study. Based on the total K quantity of leachate collected during the whole 12 weeks, 0-20-20 is the K fertilizers the most contributing to the leaching of K, then MKP, the second, KCL, the third, and finally $KNO_3$ are K fertilizers contributing to the K leaching. However, most amount of K applied and collected in the lysimeter were leached during the first period of two and four weeks, compared to that of K leached during the second period of six, eight, ten, and twelve weeks. Application of CKCL and $CK_2SO_4$ producted the largest amount of total dry matter, then MKP and KCL, $KNO_3$ and $CKNO_3$, 0-20-20 in second group. However, except $K_2SO_4$, most K fertilizer sources such as MKP, KCL, $KNO_3$, CKCL, $CK_2SO_4$, $CKNO_3$, 0-20-20 showed the largest amount of K uptake, except $K_2SO_4$. Therefore, based on the K leaching, dry matter production, and plant K uptake, it appears that the coated fertilizers, CKCL, $CKNO_3$, and $CK_2SO_4$ are the environmentally sound fertilizers recommended in the turfgrass green soil of golf course.