• 동의생리병리학회지
• /
• 제23권2호
• /
• pp.443-451
• /
• 2009

Soyangin-Hyeongbangpaedok-san(SHBPDS) is used for treating upper respiratory infections, In an effort to investigate the anti-inflammatory effects of SHBPDS, we measured production of several cytokines and immunoglobulin in various immune cells. SHBPDS decreased the secretion of TNF-${\alpha}$, but not that of IL-6 in PMA/A23187 stimulated HMC-1 cells. As for mouse B cells, it induced proliferation and caused differential effects in expressions of surface IgE as determined by flow cytometry and secretions of IgE, IgG1, ILA and INF-${\gamma}$as measured by ELISA but showed little change in CD23 or CD69 expression. SHBPDS increased proliferation in anti-CD3/anti-CD28 stimulated CD4 Th cells. Under the Th1/Th2 polarization conditions, SHBPDS at 200 ${\mu}g/m{\ell}$ suppressed the secretion of INF-${\gamma}$ and IL-4. Based on the above results, we conclude that SHBPDS has antiinflammatory activities in mast cells and different immunomodulatroy effects in B cells and Th cells.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.

• 지질공학
• /
• 제10권2호
• /
• pp.172-188
• /
• 2000

해수 침투 연구의 국·내외 동향을 분석하고 물리탐사기술의 역할과 현재의 위치를 점검하였다. 과학기술부 자연재해기술개발사업의 일환으로 수행한 '해수침투 평가, 예측 및 방지가술 개발' 과제를 통하여 과거보다 진전된 기술의 내용과 향상된 수준을 적용 사례를 통하여 예시하였다. 해수침투 문제에 계수형 물리검층 기술을 활용함으로써 해석의 정밀성을 제고하였으며, 해수침투의 영역을 획정하는 기술과 해수침투의 주경로를 해석한 연구사레를 예시하였다. 해수 침투의 지속여부를 판정할 수 있는 기술로 개발된 전기비저항 모니터링 시간영역 전자탐사(TEM) 모니터링 기술의 특징을 설명하였으며 해수침투대와 양전도성 지층의 구별을 위하여 개발된 참조채널 유도분극탐사기술을 소개하였다. 해수침투 확산 예측 과정에서 연구지질의 개념모형을 제시하기 위한 해수침투대의 공간적 분포 파악 기술을 예시하였다. 마지막으로, 현재의 기술수준을 토대로 한 물리탐사기술의 향후 발전？향도 제안하였다.

• 자원환경지질
• /
• 제53권3호
• /
• pp.259-269
• /
• 2020

The use of the geophysical method in mining prospecting has been studied in the Asdaf region (South-East of Morocco). The objective of the study is to examine the aptitude of the electrical technique, in this case induced polarization (IP) and electric tomography, combined with the electromagnetic method (VLF), in the exploration of barite . The result obtained by the pseudo-sections of electrical tomography and that of KH filtration highlighted anomalies of resistant contact (greater than 400Ω.m) and of high charge chargeability (5mV / V). These contacts are hosted in less resistant Devonian age shale and sandstone. The resistivity response obtained at their level is characteristic of the venous structures associated with barite mineralization. The direction of the mineralized veins is parallel to the direction of the fractured zones (NE-SW), which indicates that the mineralization in place is due to the tectonic movements of the Hercynian orogeny (from Devonian to Permian). These veins are aligned with the locations of abandoned mine shafts and with surface mining areas. Geophysical technique therefore seems to play a key role in barite mining exploration.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.288-292
• /
• 2015

New lead-free piezoelectric ceramics $0.96[\{Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}\}_{1-x}La_x(Ti_{1-y}Nb_y)O_3]-0.04SrTiO_3$ (BNKT-ST-LN, where $x=y=0.00{\leq}(x=y){\leq}0.015)$ were synthesized using the conventional solid-state reaction method. Their crystal structure, microstructure, and electrical properties were investigated as a function of the La and Nb (LN) content. The X-ray diffraction patterns revealed the formation of a single-phase perovskite structure for all the LN-modified BNKT-ST ceramics in this study. The temperature dependence of the dielectric curves showed that the maximum dielectric constant temperature ($T_m$) shifted towards lower temperatures and the curves became more diffuse with an increasing LN content. At the optimum composition (LN 0.005), a maximum value of remnant polarization ($33C/cm^2$) with a relatively low coercive field (22 kV/cm) and high piezoelectric constant (215 pC/N) was observed. These results indicate that the LN co-modified BNKT-ST ceramic system is a promising candidate for lead-free piezoelectric materials.

• 지구물리와물리탐사
• /
• 제17권4호
• /
• pp.209-215
• /
• 2014

광물자원탐사 기술 개발의 일환으로 광대역 유도분극 탐사 자료를 활용한 광체의 부존 가능성 평가를 위해 모이산 지역에 대한 3차원 포텐셜 지도 구축 연구가 수행되었다. 현장 탐사 결과를 지질모델링 영역별로 해석하여 광체 영역에서 나타나는 위상 및 전기비저항 값의 분포 특성을 해석하였으며, 이를 바탕으로 모이산 광체에 대한 부존 잠재성 평가를 수행하였다. 잠재성 평가 결과 기존에 확인된 광체 영역에서는 높은 부존 가능성이 확인되었으며, 최근 시추를 통해 확인된 일부 광체 영역에서도 주변부에 비해 잠재성이 높은 것으로 해석되어 신뢰도가 높음을 확인하였다. 광체 분포특성에 따라 효과적으로 측선 설계가 이루어지고 보다 조밀한 광대역 유도분극 탐사 자료를 얻을 경우 이번 연구를 통해 습득한 해석 기술은 광체 평가에 효율적으로 적용될 수 있을 것으로 판단된다.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.45-53
• /
• 1999

접지된 유전체층 위의 유한한 개수의 도체스트립에 의한 전자기 산란문제를 TM편파의 경우에 대하여 송수신 누설파 안테나와 격자결합기의 관점에서 고려하였다. 도체스트립에 유기된 전류를 미지수로 하는 적미분 방정식을 유도하고 모멘트법을 이용하여 풀었다. 도체스트립에 걸쳐서 특정한 전원(전류) 분포를 갖는 비균일한 누설파 구조를 구성하기 위하여 누설파 구조를 따라 인접하는 스트립들 사이의 거리의 스트립의 폭이 함께 변화되었다. 도체스트립의 전류분포 및 표면파 전력에 대한 해석결과들로부터 적절히 구성된 비균일한 누설파 구조의 수신 누설파 안테나 및 적자결합기 관점에서의 최대 결합효율이 균일한 구조에서의 80%에 비해 15%정도 개선된 95%가 됨을 관찰하였다.

• Corrosion Science and Technology
• /
• 제13권3호
• /
• pp.87-94
• /
• 2014

Recently, the application of bending products has been increased since the industries such as automobile, aerospace, ships, and plants greatly need the usage of pipes. For facility fabrication, bending process is one of key technologies for pipings. Induction heat bending process is composed of bending deformation by repeated local heat and cooling. Because of local heating and compressive strain, detrimental phases may be precipitated and microstructural change can be induced. This work focused on the effect of induction heat bending process on the properties of ASME SA312 TP316 stainless steel. Evaluation was done on the base metal and the bended areas before and after heat treatment. Microstructure analysis, intergranular corrosion test including Huey test, double loop electropotentiokinetic reactivation test, oxalic acid etch test, and anodic polarization test were performed. On the base of microstructural analysis, grain boundaries in bended extrados area were zagged by bending process, but there were no precipitates in grain and grain boundary and the intergranular corrosion rate was similar to that of base metal. However, pitting potentials of bended area were lower than that of the base metal and zagged boundaries was one of the pitting initiation sites. By re-annealing treatment, grain boundary was recovered and pitting potential was similar to that of the base metal.

• 천문학논총
• /
• 제30권2호
• /
• pp.397-399
• /
• 2015

Recently, cosmic voids have been recognized as a powerful cosmological probe. A number of studies have focused on the effects of the gravitational lensing by voids on the temperature (and in some cases polarization) anisotropy of the Cosmic Microwave Background (CMB) background at relatively large to medium scales, l ~ 1000. Many of these studies attempt to explain the unusually large cold spot in CMB temperature maps and dynamical evidence of dark energy via detections of late-time integrated Sachs Wolfe (ISW) effect. Here, the effects of lensing by voids on the CMB temperature anisotropy at small scales, up to l = 3000, will be investigated. This work is carried out in the light of the benefits of adding large catalogues of cosmic voids, to be identified by future large galaxy surveys such as EUCLID and LSST, to the analysis of CMB data such as those from Planck mission. Our numerical simulation utilizes two methods, namely, the small-de ectionangle approximation and full ray-tracing analysis. Using the fitted void density profiles and radius (RV ) distribution available in the literature from N-body simulations, we simulated the secondary temperature anisotropy (lensing) of CMB photons induced by voids along a line of sight from redshift 0 to 2. Each line of sight contains approximately 1000 voids of effective radius $RV_{,eff}=35h^{-1}Mpc$ with randomly distributed radial and projected positions. Both methods are used to generate temperature maps. The two methods will be compared for their accuracy and effciency in the implementation of theoretical modeling.

• 지질공학
• /
• 제18권4호
• /
• pp.423-431
• /
• 2008

충적층의 구성물질 중에서 포화된 실트 또는 점토층은 다른 층들에 비해 상대적으로 낮은 전기비저항 값을 나타낸다. 따라서 자료해석에 있어서 실트 및 점토층이 전기비저항이 작고 투수성이 높은 대수층으로 오인될 수 있다. 본 연구에서는 이러한 문제를 극복하고 충적층 내 포화된 실트 또는 점토층과 모래 또는 자갈 대수층을 구분하기 위해 충적층을 구설하고 있는 물질의 전기비저항 및 유도분극 값을 함께 측정하는 실내실험을 실시하였다. 실험결과 실트 또는 점토시료가 모래시료보다 충전성이 높게 나타났으며, 또한 모래와 점토 혼합시료에서 점토함량이 증가함에 따라 전기비저항은 감소하고 충전성은 증가하다가 다시 감소하는 경향을 보였다.