• 대한원격탐사학회지
• /
• 제32권5호
• /
• pp.511-527
• /
• 2016

본 연구는 실내 영상을 저비용으로 취득할 수 있는 회전식 스테레오 프레임 카메라 시스템을 제안하고 이를 이용해 생성한 실내 3차원 모델의 정확도를 평가하였다. 하나의 실험 대상지를 선정하여 제안한 시스템과 토탈스테이션을 이용하여 각각 영상과 기준점 데이터를 취득하였다. 취득한 데이터로부터 다양한 조합의 입력 데이터를 상용 사진측량 소프트웨어로 처리하여 실내 3차원 모델을 생성하였다. 생성된 모델을 정성적, 정량적인 분석을 통해 제안한 시스템을 이용한 실내 3차원 모델링 가능성을 평가하였다. 그 결과 제안한 시스템을 이용하여 생성한 실내 3차원 모델은 높지 않은 정확도를 요구하는 실내 서비스에 활용될 수 있을 것으로 보인다.

• KIEAE Journal
• /
• 제12권3호
• /
• pp.53-60
• /
• 2012

This research is an illustrative research to verify the thermo environmental change created after introduction of indoor pond through abridged model test and simulation analysis. Especially, temperature and comfort level are analyzed by adjusting factors like size of water space, distance length, and location. Summary of the research is as follows. First, the most effective size of water space is 7% of the indoor size, from southern side. Temperature reduction effect is about $1.6^{\circ}C$(5.5%), and for the comfort level, it is found that pmv index increases 8%. Second, based on the simulation of distance length with the sphere, it is more effective as it is close to the surface. If distance length is more than 0.5m, there is no effect on reduction of temperature and comfort level of indoor environment. Lastly, for the analysis by location of the introduced water space, simulation is undertaken by dividing the water space (14% of the indoor size) with front, side, rear and center types. Temperature reduction effect is found to be : front type ($-1.53^{\circ}C$), side type ($-0.82^{\circ}C$), rear type ($-0.44^{\circ}C$), center type ($-0.28^{\circ}C$), respectively. The indoor environment change data by introduction of water space, found in this research, is at initial phase, but it is deemed to be a basic data to refer when planning actual water space.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권1호
• /
• pp.27-38
• /
• 2019

Sensors collect information for Internet of Things (IoT)-based services. However, indoor construction sites have a poor communication environment and many interfering elements that make it difficult to collect sensor information. In this study, a network was constructed between a Bluetooth Low Energy (BLE)-based IoT device based on a serverless IoT framework and a router. This experimental environment was applied to large- and small-scale indoor construction sites. Experiments were performed to test the communication performance of BLE-based IoT devices and routers at indoor construction sites. An analysis of the received signal strength indication (RSSI) graph patterns collected from the communication between the BLE-based IoT devices and routers for different testbed site situation revealed areas with good communication performance and poor communication performance due to interfering factors. The results confirmed that structural components of the building as well as the materials, equipment, and temporary facilities used in indoor construction interfere with the communication performance. Construction project managers will require improved technical knowledge of IoT, such as optimizing the router placement and matching communication between the router and workers, to improve the communication performance for large-scale indoor construction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.1-4
• /
• 2006

Most apartment houses were sited in road because it was convenient for transportation. One of the most noise is traffic noise at apartment house. The tested site was closely located in rail road and installed soundproofing wall. This study is measured indoor and outdoor noise distribution in apartment house for each story. It was similar noise distribution at indoor test but it was different noise distribution at outdoor test for each story. It was measured higher noise level at the upper stories than 5th story in outdoor noise distribution.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.199-203
• /
• 2009

The purpose of this research is to investigate how the indoor temperature has influence on occupants' attention abilities as a basis of productivity. To achieve the purpose, the experiment in chamber was conducted. In the experiment, temperature was controlled according to two levels ($20^{\circ}C$ or $23^{\circ}C$) and other of factors were controlled uniformly. Subjects were exposed to those two different thermal environments. Each participant was asked to mark their answers on the state of attention measurement sheets (FAIR and Trail making test), in two conditions. Total 60 times of experiments were conducted. The main results are as follows. First, subjects showed the better attention abilities in relation to Q score at $20^{\circ}C$. But on the other hand attention abilities in relation to C score were better at $23^{\circ}C$. Second, subjects showed the better attention abilities in relation to concentrate on one task at $20^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.160-163
• /
• 2003

This paper represent a test method for the reliability assessment on the indoor vacuum circuit breakers used in the distribution system by an accelerated life test. In order to guarantee the lifetime in service of the vacuum circuit breaker, additional test methods are suggested. Multiple closing-opening operation test under no load condition as a mechanical endurance test and a check of the quality in the vacuum interrupter are adopted to assure the long-term reliability of the vacuum circuit breaker.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.487-490
• /
• 2005

In this study, for the establishment of the performance evaluation methods and the quality control standards of durability recovery method, the data of indoor durability test and the data of the long term exposure test under the coast are accumulated and analyzed. As a result of the indoor test, durability of repair material was more superior to that of plain concrete, but as a result of investigating and evaluating exposure test at 30 month of exposure age under the coastal environment, the difference in electric potential and the reinforcement corrosion at place replaced with repair material are found.

• 한국학교보건학회지
• /
• 제23권1호
• /
• pp.29-40
• /
• 2010

Purpose: The purposes of this study were: (a) to assess indoor air quality such as $PM_{10}$, $CO_2$ concentrations in child daycare centers, (b) to compare the levels with each standard, and (c) to identify teachers' awareness of indoor air quality in child care centers. Methods: Data were obtained from seventeen child daycare centers and ninety-eight teachers in a district of Seoul, from April 3 to May 12, 2009. Collected data were analyzed by SAS 8.2, and descriptive statistics, $x^2$ test, student t-test, Pearson correlation analysis, and Spearman rank correlation were used. Results: The mean of $PM_{10}$ and $CO_2$ level were $50.3{\mu}g/m^3$ and 792.1ppm. Sixteen child daycare centers (94.2%) met the guidelines of the $PM_{10}$ level, so did thirteen child daycare centers (76.5%) in the $CO_2$ level. $CO_2$ levels were significantly low in child daycare centers using air cleaners than those do not using them (t=-6.03, p<.001). Types of child daycare centers were significantly correlated to the levels of $CO_2$, which public child daycare centers were low in $CO_2$ levels than those of private child daycare centers (t=-2.54, p=.013). There was no significant correlation between teachers' awareness and management attitude of indoor air quality while teachers' awareness of indoor air quality significantly raised the frequency of carpet cleaning. Methods of cleaning routines were significantly correlated with $PM_{10}$, and $CO_2$ levels. Conclusion: The $PM_{10}$ and $CO_2$ concentrations in child daycare centers were satisfactory. Those conditions are affected by general characteristics of child daycare centers and teachers' attitude regarding management of indoor air quality.

• 한국정보시스템학회지:정보시스템연구
• /
• 제19권1호
• /
• pp.1-17
• /
• 2010

This paper proposes an updating policy of indoor moving object databases (IMODB) for location-based services. our method applies the Ka1man filter on the recently collected measured positions to estimate the moving object's position and velocity at the moment of the most recent measurement, and extrapolate the current position with the estimated position and velocity. If the distance between the extrapolated current position and the measured current position is within the threshold, in other words if they are close then we skip updating the IMODB. When the IMODB needs to know the moving object's position at a certain moment T, it applies the Kalman filter on the series of the measurements received before T and extrapolates the position at T with the estimations obtained by the Kalman filter. In order to verify the efficiency of our updating method, we performed the experiments of applying our method on the series of measured positions obtained by applying the fingerprinting indoor positioning method while we are actually walking through the test bed. In the analysis of the test results, we estimated the communication saving rate of our method and the error increment rate caused by the communication saving.

• 한국환경보건학회지
• /
• 제34권5호
• /
• pp.369-373
• /
• 2008

The indoor environment is an important source of exposure to various aeroallergens and pathogenic microorganism. It has been shown that exposure to aeroallergens enhances the risk of indoor inhabitants developing asthma. Since the skin prick test, a typical clinical method for identification of subjects positive to allergens, can rarely cause fatal or non-fatal reactions in susceptible persons, an in vitro assay such as ELISA using serum has been considered for testing positivity against various allergens. We evaluated the validity of a serum ELISA kit for screening positive subjects to major aeroallergens including Dermatophagoides farinae, Dermatophagoides pteronyssinus, cockroach, Alternaria, Cladosporium, Aspergillus, Penicillium, dog hair, cat fur, mugwort, and ragweed. The ELISA results were compared with the skin prick test results, and sensitivity, specificity, and overall accuracy were calculated to each allergen. Higher sensitivities were obtained from D. farinae, (77.8%) and D. pteronyssinus (69.2%), but sensitivities to Aspergillus, Penicillium, dog hair, cat fur, and ragweed were very low down to 0%. Specificity ranged from 88.7% (cat fur) to 100% (mugwort and ragweed). Overall the accuracy of the serum ELISA kit was relatively high, in that the lowest was 85.1% for cat fur and the highest was 98.6% for Alternaria, Cladosporium, and ragweed. Considering specificity and overall accuracy for the serum ELISA kit, it may be considered reliable. However, when the kit is used for screening purpose, positivity to aeroallergens should be carefully determined since sensitivity for the kit is low.