• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.90-95
• /
• 2018

This study was carried out to investigate the optimum temperature and the cultivation period according to the different growth stages of Gastrodia elata (G. elata). The growth period for the indoor cultivation of G. elata is divided into four stages that require specific temperatures during the enlargement of the tuber. The optimum temperatures and cultivation periods during the growth stages of G. elata were observed to be $20^{\circ}C$ for 30 days during the mycelial growth stage (MGS), $25^{\circ}C$ for 120 days during the tuber formation stage (TFS), $6-24^{\circ}C$ for 60 days during the tuber enlargement stage (TES), and $5^{\circ}C$ for 30 days during the dormant stage (DS). The total cultivation period was shortened by 120 days in the indoor cultivation facilities by reduction of 30 days from the mycelial growth stage, addition of 30 days to the tuber formation stage, and reduction of 120 days from the dormancy stage as compared to the outdoor field cultivation. These results provide a basis for a growth model that permits year-round cultivation of G. elata.

• Journal of People, Plants, and Environment
• /
• v.22 no.1
• /
• pp.1-14
• /
• 2019

This study was designed to examine agro-healing services and programs provided and operated by farms in Korea. The results of the analysis of the agro-healing programs and operation of farms were as follows. The purpose of the operation of farms was to raise productivity by managing farms in a cooperative way through agricultural production, education and healing, and to raise income by processing and selling agricultural products. It was difficult to access farms by public transport and thus visitors had to use their own cars. The size of farms varied. The main resources utilized in the surveyed programs were plants, rural environments and landscapes, and agricultural products. The programs were conducted using resources that were commonly found in rural areas. Facilities on each farm were equipped with facilities (indoor and outdoor learning place, gardens, vegetable gardens, orchards, etc.) and convenience facilities (parking lots, drinking fountains, kiosks, etc.) to support program operation. However, facilities for the handicapped and accommodation facilities were insufficient. The programs operated on each farm utilized agricultural resources, farm produce, and rural resources and were classified into activities such as making, feeling, and growing. The average number of people who operated the family-centered program was 2-3, having qualifications such as welfare horticultural therapists, forest interpreters, experience instructors, and social workers. In addition, they had expertise in medicinal food, dietary life, and social welfare, and they also had essential expertise required to operate programs.

• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.3-12
• /
• 2016

This study analyses characteristics of space to facilitate community centering on cases of collective houses in Japan and uses the results as basic data to activate collective houses as an alternative form of housing in our country. To identify the characteristics of space for active communities with collective living space, this study conducted a theoretical examination on collective houses and housing, derived territoriality, accessibility, comfort and safety as factors of community activation and analysed various cases, and the results are presented as follows: First, territoriality is a necessary condition for formation of community, and a confined and physical space. It indicates the proper size of a space and diverse spacial areas which meet the needs of residents with the proper size and amount of space (space which can accommodate diverse generations including women, the aged and the young, flexible space which changes according to the purposes and program, space which supports leisure and hobby activities, and space which can accommodate outsiders). Second, accessibility indicates an environment which supports residents' easy use of space. As the more accessible it is, the higher the frequency of its use, spatial factors (piloti, backyards, benches and tables) should be provided, community space should be arranged in a central or decentralized way and community living space should be made for each floor. As for exits, accessibility should be considered in every way; entrances connected with community spaces, open entrances and entrances accessible from outside or individual living spaces. Third, comfort satisfies the physical and mental needs of residents through separation of floors and flows between the community and individual spaces for privacy and formation of eco-friendly spaces including vegetable gardens, gardens and plant arrangements. Fourth, safety should be considered for a higher quality environment with psychological stability and comfort, for which the following are recommended: installation of hand-rails, removal of thresholds, spacial design for the socially weak, duplex and open type structures for community space, open stages and halls, as well as indoor and outdoor openness through the use of windows.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.4
• /
• pp.265-275
• /
• 2012

Objectives: The aim of this study was to investigate the distribution patterns and exposure concentrations of biological hazards in waste handling industries. Methods: We selected 3 recyclable waste sorting plants(RWS), 2 food recycling plants(FR), 1 landfill area(LA) and 1 waste incineration plant(WI). Total airborne bacteria and fungi were measured with single stage impactor and gelatin filters. Endotoxin and glucan were measured with polycarbonate filters in total and respirable dust. Results: The geometric mean of airborne bacterial concentration was the highest in FR($3,273CFU/m^3$), followed by LA, RWS, and WI as 1,334, 934, and $860CFU/m^3$. The fungal concentrations were 6,031, 5,052, 3,307, and $713CFU/m^3$ in RWS, WI, FR, and LA, respectively. By process, WI pit showed the highest concentrations of bacteria, fungi, and endotoxin, followed by inside of bulldozer in LA. The indoor to outdoor ratios of bacteria, fungi, endotoxin and glucan were 2.3, 4.0, 2.3, and 5.0 in RWS, 29.5, 4.9, 7.6, and 5.0 in FR, 5.3, 8.7, 26.8, and 9.5 in WI, respectively. Conclusions: We found that biological hazards, specifically bacteria in FR, fungi in RWS and endotoxin in WI pit and bulldozer at LA, should be controlled to prevent worker's respiratory diseases.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.5
• /
• pp.80-89
• /
• 2022

In order to solve the limitations of horizontal thermal environment improvement, this study compared the thermal environment of the indoor and outdoor of a building in summer according to the presence or absence of a green curtain, a vertical greening method. In the summer of 2021, the air temperature, relative humidity, wind speed, and shortwave and longwave radiation were measured at a central point inside a building and the grass field outside of the building to determine the human thermal sensation index, PET and UTCI. As a result, the green curtain showed an average 1.6℃ cooler air temperature during the daytime, but it did not have an effect at night. For relative humidity, it showed higher humidity indoors by an average of 5.6% and 1.0% during the daytime and at night, respectively. Wind speed was 1.4-1.8 ms^-1 and 1.4-1.5 ms^-1 higher outdoors on average during the daytime and at night, respectively, showing a high value outdoors regardless of whether a green curtain was installed. The green curtain showed an average indoor mean radiant temperature reduction effect of 4.7℃ during the daytime, but it did not have an effect at night. In PET and UTCI, the green curtain reduced the indoor PET by about a 1/3 level, an average of 2.1℃, and the indoor UTCI by about a 1/6 level, an average of 1.1℃, during the daytime. However, no effects appeared in PET and UTCI at night. For landscape planning, a green curtain can effectively modify the thermal environment during the daytime in summer.

• Korean Journal of Human Ecology
• /
• v.20 no.1
• /
• pp.205-223
• /
• 2011

This study examines diagrams of space organization and classroom activity zoning through Korean Childcare Accreditation Criteria, and compares space diagrams with childcare facilities in Daejeon, and looks at similarities and differences between them. Space diagram from accreditation criteria show the classroom, adjoining toilets, napping areas, and community areas for playing, reading, cooking, teaching and holding materials. Classroom zone diagrams show 8 activity zones for entering, washing and toilet, making art, playing, reading, studying science, resting, playing role and wooden block. Six case studies in Daejeon, Korea were surveyed and classified into big, medium and small size facilities by the number of children. The space organization of case studies are similar to the diagrams, except that outdoor playground and indoor playrooms were not large enough at the small and medium size facilities. Classroom activity zoning was very similar to the conceptions, excluding the playarea from classroom, integrating the rest areas for reading, subdividing art into music and art, science, and into math and science, roleplay into roleplay and wooden block. In conclusion childcare centers in Daejeon are designed to the concept diagram of the accreditation criteria, with some flexibility, exclusion, integration, and subdivision of space and activity zones. It has been requested as to make each criteria fit to the facility sizes-big, medium and small.

• Journal of People, Plants, and Environment
• /
• v.22 no.6
• /
• pp.575-582
• /
• 2019

Moss is used as an important material in indoor landscaping as well as outdoor landscaping. Moss is vivid green during growth and excellent in ornamental value. But when temperature drops, moss stops growth, turns brown or loses its ornamental value. In the present experiment, for the purpose of classifying native mosses according to the growth response to low temperature, the temperature of the plant growth chamber was set to 15℃/5℃ (16h/8h, day/night) and 5℃ (24h) for 8 weeks using nine native moss species. Thereafter, the temperature of the plant growth chamber was set to 20℃, and then the changes of moss block area and moss color were measured. The changes of moss block area and moss color were measured using a Photoshop program, after each moss block was photographed. As a result, Atrichum undulatum (Hedw.). Beauv., Etodon luridus (Griff.) A. Jaeger, Bachythecium plumosum (Hedw.) Schimp, Plagiomnium cuspidatum (Hedw.) T.J. Kop, and Hypnum plumaeforme Wilson showed a small decrease in moss block area at low temperature, and their recovery were the fastest at 20℃. These three species had higher green values at low temperature compared to other species, and the greenness increased rapidly at 20℃. On the other hand, Atrichum undulatum (Hedw.). Beauv., Marchantia polymorpha L., and Thuidium cymbifolium (Mitt.) A. Jaeger showed the smallest block area at low temperature and the lowest recovery even at 20℃. Their green values also decreased significantly at low temperature, and maintained low green value even at 20℃. These results showed that these three moss species are sensitive to low temperature. The remaining Myuroclada maximowiczii, Plagiomnium cuspidatum, and H. erectiusculum showed moderate responses to low temperature compared to other six species of mosses.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.5 s.122
• /
• pp.437-447
• /
• 2007

A series of research to seek for the relationship between subjective responses and noise level for transportation noise have been proceeded, and their results showed similar for some cases and different for some other cases as well, which is considered due to the various conditions such as the way of survey, different scale applied, and country etc. This study aimed to analyze the relationship between sound level and subjective response for the different kinds of transportation noise. The noises recorded in real situation were played to thirty subjects with fourty nine adjectives. The percentage of people annoyed(% PA) and the percentage of people highly annoyed(% HA) were calculated from the subjective results and compared how many percent of people are annoyed and highly annoyed for the same sound level. As a result of calculating the average, the aircraft noise was highest and the white noise lowest. The relationship between window TL and average point was well correlated except the aircraft noise which was scattered because of high sound level at specific frequency and low TL at corresponding frequency. This means that appropriate rating method for airborne sound transmission should be sought for to evaluate outdoor noise which has different frequency characteristics. The Boltzmann equation for % PA and % HA was applied to predict the sound level corresponding to the percentage. It is concluded that the aircraft noise and road traffic noise have almost same response and the railway noise was same with white noise, used for the reference noise, annoyed lower than other noises about by 3 dB.

• 한국균학회소식:학술대회논문집
• /
• 2016.05a
• /
• pp.11-11
• /
• 2016

Penicillium species are commonly isolated from various outdoor and indoor environments, including marine environments such as sponges, algae and sand. Penicillium is especially important because numerous bioactive compounds have been isolated. Penicillium was the most common species in intertidal zone in Korea, however the diversity and ecological roles of Penicillium in intertidal zone are not clarified. We explored diversity and ecological roles of marine-derived Penicillium from tidal flat and sea sand in Korea. The diversity of marine-derived Penicillium from Korea was investigated using both culture-dependent and culture-independent approach by ${\beta}$-tubulin sequence. In addition, we evaluated optimal temperature, halo-tolerance, and enzyme activity of Penicillium strains, such as extracellular alginase, endoglucanase, ${\beta}$-glucosidase, and protease. For culture-dependent approach, a total of 182 strains of 62 Penicillium species were isolated, with 53 species being identified. The most common species was Penicillium oxalicum, followed by P. crustosum, P. brasilianum, P. koreense, and P. griseofulvum. Species richness and composition were not significantly different by season, substrates, and seaside. For culture-independent approach using Illumina sequencing, 73 OTUSs were detected. The most frequently observed species was P. antarcticum, followed by P. koreense, P. crustosum, and P. brevicompactum. Diversity of Penicillium was higher during winter season than during summer season and in western sea than in southern sea, respectively. Community structure was significantly different by season and sea side. 52 species were detected by both methods. Unique species were isolated from each of methods - 10 from culture methods and 21 from Illumina sequencing. Furthermore, salinity adaption of the Penicillium varied depending on species. Many Penicillium species showed endoglucanase, ${\beta}$-glucosidase, and protease activity. Some species including P. paneum and P. javanicum degraded the polycyclic aromatic hydrocarbons. Thus, our results demonstrate that intertidal zone in Korea harbors diverse Penicillium community and marine-derived Penicillium play important ecological roles as decomposers of organic material in marine environments.