• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2020

In this study, boron/silicon sol compounds were applied to wood for construction and durable materials, and fire risks were investigated in terms of smoke performance index (SPI), smoke growth index (SGI), and smoke intensity (SI). The compound was synthesized by reacting tetraethoxyorthosilicate with boric acid and boronic acid derivatives. Smoke characteristics were investigated using a cone calorimeter (ISO 5660-1) equipment for cypress wood. The fire intensity fixed the external heat flux at 50 kW/㎡. The smoke performance index measured after the combustion reaction increased between 13.4% and 126.7% compared with cypress wood. The fire risk due to the smoke performance index decreased in the order of cypress, phenylboronic acid/silicon sol (PBA/Si), (2-methylpropyl) boronic acid/silicon sol (IBBA/Si), boric acid/silicon sol (BA/Si). The smoke growth index decreased between 12.0% and 57.5% compared to the base specimen. The risk of fire caused by the smoke growth index decreased in the order of cypress, PBA/Si, IBBA/Si, BA/Si. The fire risk due to smoke intensity decreased between 3.2% and 57.8%, and in the order of cypress, PBA/Si, IBBA/Si, BA/Si. CO_peak concentrations ranged between 85 and 93 ppm, and decreased between 37% and 43% compared to the base specimen. A comprehensive assessment of the fire risk on smoke hazards decreased in the order of cypress, PBA/Si, IBBA/Si, BA/Si.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.85-98
• /
• 2005

As the number of compound cavity modes within the stopband of DFB sections decreases, the frequency of mode hopping decreases for the variation of $\Delta$λ$_{B}$, which represents the difference between the Bragg wavelengths of two DFB sections, so that the number of abrupt changes of pulsation frequencies decreases. In addition, the pulsation frequency varies continuously for the variation of the phase in a phase tuning section for a fixed $\Delta$λ$_{B}$. The number of compound cavity modes within the stopband decreases as the length of DFB sections increases and the length of a phase tuning section decreases. Thus stable self-pulsation operations for the variation of $\Delta$λ$_{B}$ and the phase in a phase tuning section could be obtained by proper selection of the coupling strength and the length of each section.ction.

• Elastomers and Composites
• /
• v.37 no.3
• /
• pp.177-182
• /
• 2002

For low-smoke-type polyolefin compound, LDPE, EVA, and EEA as base resin, magnesium trihydrate, alumina trihydrate, and red phosphorous as flame retardant and MAH type compatibilizer were applied. The amount of each component was changed to find out optimum composition. Mechanical properties were obtained by tensile test and residual stress after aging and flame retardancy was evaluated by smoke density, LOI(Limit Oxygen Index), and UL-94 test. SEM was used for the investigation or morphology and halogen contents were obtained by measuring the amount of HCI. Two kinds of halogen free compositions for flame retardant and low smote resin were found and it is expected to be applied for various purposes.

• Journal of the Korean Society for information Management
• /
• v.13 no.1
• /
• pp.47-63
• /
• 1996

Conventional automatic indexing methods for Hangul texts can be classified into two groups as follows: One is to extract index terms by removing non-indexable segments from word-phrases, and the other is to generate index terms from the morphemes of word-phrases. The former suffers from the problem of word boundaries when documents contain many compound nouns. The latter can overcome the word boundary problem by extracting simple nouns, but has many overheads to develop a lot of linguistic knowledges needed in the indexing procedure. In this paper we propose a new indexing method based on n-grams. This method alleviates the problems of previous indexing methods related with word boundaries and linguistic knowledges. We also compare the effectiveness of the n-gram based indexing method with that of the previous ones.

• Journal of Information Processing Systems
• /
• v.17 no.5
• /
• pp.918-932
• /
• 2021

Evaluation of the collaboration of the upstream and downstream enterprises in the manufacturing supply chain is important to improve their synergistic effect. From the supply chain perspective, this study establishes the evaluation model of the manufacturing enterprise collaboration on the basis of fuzzy entropy according to synergistic theory. Downstream enterprises carry out coordinated capital, business, and information flows as subsystems and research enterprises as composite systems. From the three subsystems, the collaboration evaluation index is selected as the order parameter. The compound fuzzy matter-element matrix is established by using its improved algorithm. Subordinate membership and standard deviation fuzzy matter-element matrixes are constructed. Index weight is determined using the entropy weight method. The closeness of each matter element is then calculated. Through a representative of the home appliance industry, namely, Gree Electric Appliances Inc. of Zhuhai, empirical analysis of data in 2011-2017 from the company and its upstream and downstream enterprise collaboration shows a good trend, but the coordinated development has not reached stability. Gree Electric Appliances Inc. of Zhuhai need to strengthen the synergy with upstream and downstream enterprises in terms of cash, business, and information flows to enhance competitiveness. Experimental results show that this method can provide precise suggestions for enterprises, improve the degree of collaboration, and accelerate the development and upgrading of the manufacturing industry.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.8
• /
• pp.41-52
• /
• 2021

Purpose: The study aims to analyze effects of wage on FDI inflows based on the threshold of institutional quality in 14 developing economies of Southeast and South Asia over the period from 2000-2017. Research design, data, and methodology: The study applies a fixed effect panel threshold regression. As a proxy for the institutional quality, it uses the six components of Worldwide Governance Indicators or a compound index obtained by an average of the six components. The data were taken from World Bank, the Chinn & Ito Database, and UNCTAD. To the best of our knowledge, no researches so far have considered the threshold of institutional quality in estimating the effect of wage on FDI inflows. Results: The composite index and each component of the six indicators of institutional quality except for voice and accountability, and regulatory quality are found to have nonlinear effects on FDI inflows. When the institutional quality is below the threshold, wage affects FDI inflows negatively. When the institutional quality is above the threshold, however, wage does not significantly affect FDI inflows. Conclusions: The effect of wage on FDI inflows varies depending on whether the institutional quality of the target countries is above or below the threshold.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4940-4950
• /
• 2011

cis-(3R,5R)-Atorvastatin Ca (1) used for hyperlipidemia have four stereomers. However, It is very difficult to prepare stereoselective stereomers. In this paper, the reduction of 3,5-diketo atorvastatin ester (3) was performed using $Me_4NHB(OAc)_3$ in acetic acid as a reductant and showed excellent stereoselectivity in the double reduction of 3,5-diketo atorvastatin ester (3). As a result, reduction of compound 3 by $Me_4NHB(OAc)_3$ was purely obtained with cis-(3R,5R)-atorvastatin ester (4) of 1.5% and trans-(3R,5S)-atorvastatin ester (5) of 98.5%. Also, cis-(3R,5R)-atorvastatin Ca (1) and trans-(3R,5S)-atorvastatin Ca (7) were used to determine efficacy in the treatment of liver damage and hyperlipidemia induced by a high-fat diet in rats and to study the performance of the January 2010 experient was conducted. As a result, total cholesterol (TC), high-density lipoprotein-cholesterol (HDL-c), low-density lipoprotein-cholesterol (LDL-c), and triglyceride (TG) levels of compound 1 and 7 groups were $93.0{\pm}0.5$, $43.5{\pm}0.8$, $40.4{\pm}1.4$, $45.6{\pm}0.9\;mg/d{\ell}$ and $110.0{\pm}0.7$, $33.3{\pm}0.6$, $65.8{\pm}1.9$, $54.8{\pm}1.2\;mg/d{\ell}$, respectively. Atherogenic index (AI) and cardiac risk factor (CRF) in compound 1 and 7 were $1.14{\pm}0.05$, $2.14{\pm}0.05$ and $2.31{\pm}0.06$, $3.31{\pm}0.06$, aspartate aminotransferase (AST) and alanine aminotransferase (ALT) were $51.9{\pm}4.6$, $16.0{\pm}2.1\;IU/{\ell}$ and $75.8{\pm}4.4$, $35.1{\pm}9.7\;IU/{\ell}$. Taken together, while compound 1 treat against high-fat diet-induced hyperlipidemia by attenuating hepatic lipid depots and reducing oxidative stress, compound 7 group had a low curative effect on hyperlipidemia induced by a high-fat diet in rats. These findings suggest that new method about synthesis of stereoselective stereomers and indicate that it may consider using in a clinical trial.

• Journal of Ginseng Research
• /
• v.41 no.1
• /
• pp.103-112
• /
• 2017

Background: 20(S)-Protopanaxadiol 20-O-D-glucopyranoside, also called compound K (CK), exerts antidiabetic effects that are mediated by insulin secretion through adenosine triphosphate (ATP)-sensitive potassium ($K_{ATP}$) channels in pancreatic ${\beta}$-cells. However, the antidiabetic effects of CK may be limited because of its low bioavailability. Methods: In this study, we aimed to enhance the antidiabetic activity and lower the toxicity of CK by including it with ${\beta}$-cyclodextrin (CD) (CD-CK), and to determine whether the CD-CK compound enhanced pancreatic islet recovery, compared to CK alone, in an alloxan-induced diabetic zebrafish model. Furthermore, we confirmed the toxicity of CD-CK relative to CK alone by morphological changes, mitochondrial damage, and TdT-UTP nick end labeling (TUNEL) assays, and determined the ratio between the toxic and therapeutic dose for both compounds to verify the relative safety of CK and CD-CK. Results: The CD-CK conjugate ($EC_{50}=2.158{\mu}M$) enhanced the recovery of pancreatic islets, compared to CK alone ($EC_{50}=7.221{\mu}M$), as assessed in alloxan-induced diabetic zebrafish larvae. In addition, CD-CK ($LC_{50} =20.68{\mu}M$) was less toxic than CK alone ($LC_{50}=14.24{\mu}M$). The therapeutic index of CK and CD-CK was 1.98 and 9.58, respectively. Conclusion: The CD-CK inclusion complex enhanced the recovery of damaged pancreatic islets in diabetic zebrafish. The CD-CK inclusion complex has potential as an effective antidiabetic efficacy with lower toxicity.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1344-1351
• /
• 2012

We studied the physical, chemical, biological, and antimicrobial effects of eight types of essential oils used in the cosmetics industry: lavender, tea tree, rosemary, juniper berry, Chamaecyparis obtusa, cypress, cedar wood, and pine. Lavender oil had a linalyl acetate (an ester chemical compound) content of 48% and radical scavenging activity of 22.36% at 5,000 ppm. Tea tree oil had radical scavenging activity of 43.94% at 5,000 ppm and antimicrobial activity against S. aureus, S. epidermidis, S. mutans, and C. albicans in each 6, 3.5, 6.5, and 5 mm, respectively. Chamaecyparis obtusa oil had the highest acidity (pH 2.64) compared with the other oils, and sesquiterpene compounds were found to have 19.20%. Cedar wood oil had the highest specific gravity and refractive index compared to the other oils and had a sesquiterpene content of 99.73%. The radical scavenging activity of cedar wood essential oil exceeded 39.68% at 5,000 ppm. The clear zone, indicating antimicrobial activity against P. acnes, P. ovale, and C. albicans, was 3.5, 6, and 6 mm, respectively, at a concentration of 1% cedar wood oil. Results showed that with a high sesquiterpene content, the antioxidant effect was generally, but not always, high, suggesting that this is determined according to composition of the compound rather than presence of each antioxidant. The results indicate that antimicrobial activity is determined by the existence of each antimicrobial ingredient rather than terpene composition.

• Journal of Venture Innovation
• /
• v.1 no.2
• /
• pp.61-73
• /
• 2018

Many studies have focused on improving the predictability of influential variables in the area of customer services. For a long time, customer satisfaction index(CSI) were the best matrics of customer loyalty. In 2003, net promoter score(NPS) was introduced and in many cases this matrics was more predictive than CSI. In 2010, customer effort score(CES) was introduced and in the service areas this matrics was more predictive than CSI and NPS. This study compared with 3 matrics based on the criteria which composed of basic assumptions, time perspective, measuring items, objectives of matrics, application areas, and limitations of application. The dominant matric which was applied in all functions and industries was not exited. For the purpose of improving predictability, single or compound matrics are useful according to industries and usage.