• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.219-223
• /
• 2004

Since rotor position information is necessary to drive the SRM, absolute-encoder, resolver and incremental encoder is used to detect a rotor position. But, it is not desirable to use a high price encoder and microprocessor under the condition of the simple driving system when precision control is not demanded. In this paper, only using the reflective type two photo-sensors replaces the conventional opto-interrupter and slotted-disk, which not only remove a slotted-disk section but drive three-phase 6/4 pole SRM bidirectionally, Therefore, control circuit can compose common analog device with low price.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1343-1348
• /
• 1990

The architecture and functions of a prototype free ranging AGV system are described in this paper. The system has single tricycle configuration - the front wheel is driven and steered simultaneously. The primary position measurement device of this system is the redundant encoder system - an absolute encoder for the steering angle measurement of the front wheel, two incremental encoders for the measurement of the rear wheel rotations. The secondary position measurement device is implemented to reduce the accumulatad error in encoder measurements. The extended Kalman filter is suggested to combine the conflict measurement data for the proper position estimation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.696-697
• /
• 2015

In this paper, the shape of the slit to provide a view of the sensor in such a manner as to encode the rotor position information using a single sensor for studies of economic rotor position and speed detection method for electric motor drive has a special electronic commutator bar-and proposes a robust encoder can produce a rotor position information for each of the woman, and reads out the location information by using the position detection method of the proposed new method compared to traditional DSP Capture function of incremental encoder that its validity was verified through experiments.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.63-68
• /
• 2004

Since rotor position information is necessary to drive the SRM, absolute-encoder, resolver and incremental-encoder is used to detect a poor position. But, it is not desirable to use a high priced encoder and high efficient microprocessor under the condition of the simple driving system when precision control is not demanded. In this paper, Only using the reflective type 2 photosensors replace the conventional opto interrupter and slotted disk, which not only remove a slotted disk section but drive 3-phase 6/4 SRM bidirectionally. Moreover, as control circuit only is composed of common analog device economy is maximized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1006-1008
• /
• 2003

Position controls are very important in semiconductor manufacturing devices, machine tools precision measuring instruments, etc. to measure the distance of movement of moving objects in minute units and the accuracy of measurement for the moving distance in these devices affect the performance of the whole devices. Therefore, in those precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. In this paper, a novel encoder of digital and analog hybrid type is proposed. It is shown that from this experiment a high-resolution angle measurement device can be designed by a low cost incremental encoder.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.163-170
• /
• 2004

1960년도부터 컨테이너를 사용한 해상 물동량이 급격히 증가되어 부두에서 처리하여야할 컨테이너 양이 많이 증가되었다. 부두의 운용효율을 증가시키기 위하여 야드 크레인의 정확히 위치 검출이 상당히 중요한 과제이다. 본 논문에서는 엔코더 출력펄스와 적외선센서를 사용하여 정확하고 신속하게 크레인의 절대위치를 측정하는 기법을 제시하였다. 갠추리 바퀴에 직결된 엔코더 펄스를 카운팅하여 갠추리의 이동거리를 측정한 후, 바퀴의 슬립 통에 인하여 발생하는 측정오차를 보상하기 위하여 적외선센서를 사용하였다. 실제 크레인의 1/10 축소한 시뮬레이터로 실험을 수행하여 본 논문에서 제시한 기법의 타당성을 확인하였다.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.512-518
• /
• 2003

반도체 장비나 산업용 정밀 머신 툴 등에서 고정밀 위치제어는 매우 중요하다. 고정밀 위치제어장치와 같은 미소단위로 이동하는 물체의 이동 거리나 위치를 측정하는 다양한 기기나 반도체 제조장치 등에서 고정밀도로 위치제어를 행하는 기기들의 위치 변위 검출에 대한 정확도는 제어기의 성능을 좌우하는 중요한 요소 중의 하나가 된다 본문에서는 기존의 저가형 광학식 엔코더의 전기적 회로 부분의 변형으로 디지털 신호 및 회절격자의 회절량에 대한 아날로그 신호를 기초로 하여 마이크로프로세스의 협력으로 고정도의 위치를 얻을 수 있는 새로운 방식의 위치검출기법을 제안하였다. 또한 실험을 통하여 그 타당성을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.827-835
• /
• 1999

In this paper, a dead reckoning navigation system for differential drive mobile robots is presented. The navigation system consists of two incremental encoders and a gyroscope. We have built a third order polynomial function for compensating the nonlinear scale factor errors of the gyroscope. We utilize an indirect Kalman filter that feeds back estimated errors to the main navigation system. Also, the observability of the filter is analyzed in order to systematically evaluate the filter's performance. Experimental results show that the proposed navigation system provides a reliable position and heading angle by mutually compensating the encoder and the gyroscope errors. The proposed filter also reduces the computational burden and enhances the navigation system's reliability. The observability analysis confirms the characteristics of inevitably unbounded position error growth in dead reckoning navigation systems.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.82-91
• /
• 2014

This paper proposes a compensation algorithm for the analog rotor position errors caused by nonideal sinusoidal encoder output signals including offset and gain errors. In order to achieve a much higher resolution, position sensors such as resolvers or incremental encoders can be replaced by sinusoidal encoders. In practice, however, the periodic ripples related to the analog rotor position are generated by the offset and gain errors between the sine and cosine output signals of sinusoidal encoders. In this paper, the effects of offset and gain errors are easily analyzed by applying the concept of a rotating coordinate system based on the dq transformation method. The synchronous d-axis signal component is used directly to detect the amplitude of the offset and gain errors for the proposed compensator. As a result, the offset and gain errors can be well corrected by three integrators located on the synchronous d-axis component. In addition, the proposed algorithm does not require any additional hardware and can be easily implemented by a simple integral operation. The effectiveness of the proposed algorithm is verified through several experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.439-445
• /
• 2003

Since 1960s. container shipping volume has increased dramatically and continuous on a trend of rapid growth, and so the number of containers handled at the port increases. In order to improve yard crane operating efficiency, the precise position measurement of the yard crane is important. This paper describes the method to measure the absolute position of yard crane using the output pulse of an encoder and infrared sensors. The crane position is calculated by counting the output pulse of an incremental encoder, which is mounted on the wheel in the crane. By the way, the wheel slippage on rail may cause some errors in crane position information obtained from encoder pulses, and the errors in the crane position information are compensated with infrared sensors. The performance of proposed method is verified on experimental results with the simulator of yard crane, the size of which is about 1/10 with the real crane.