• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.409-415
• /
• 2011

Purpose: To design applied anamorphic lens that focal length ratio is 3:1 optical system to improve detecting distance. Methods: We defined a boundary condition as $50^{\circ}{\sim}60^{\circ}$ for viewing angle, horizontal direction 36mm, vertical direction 12 mm for focal length, f-number 4, $15{\mu}m{\times}15{\mu}m$ for pixel size and limit resolution 25% in 33l p/mm. Si, ZnS and ZnSe as a materials were used and 4.8 ${\mu}m$, 4.2 ${\mu}m$, 3.7 ${\mu}m$ as a wavelength were set. optical performance with detection distance, narcissus and athermalization in designed camera were analyzed. Results: F-number 4, y direction 12 mm and x direction 36 mm for focal length of the thermal optical system were satisfied. Total length of the system was 76 mm so that an overall volume of the system was reduced. Astigmatism and spherical aberration was within ${\pm}$0.10 which was less than 2 pixel size. Distortion was within 10% so there was no matter to use as a thermal optical camera. MTF performance for the system was over 25% from 33l p/mm to full field so it was satisfied with the boundary condition. Designed optical system was able to detect up to 2.9 km and reduce a diffused image by decreasing a narcissus value from all surfaces except the 4th surface. From sensitivity analysis, MTF resolution was increased on changing temperature with the 5th lens which was assumed as compensation. Conclusions: Designed optical system which used anamorphic lens was satisfied with boundary condition. an increasing resolution with temperature, longer detecting distance and decreasing of narcissus were verified.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.191-200
• /
• 1998

This study was intended to perform the influence of condyle positional change after surgical correction of skeletal Class III malocclusion after orthognathic surgery in 37 patients(male 13, female 24) using computed tomogram that were taken in centric occlusion before, immediate after, and long term after surgery and lateral cephalogram that were taken in centric occlusion before, 7 days within the period of intermaxillary fixation, at the 24 hours later removing intermaxillary fixation and long term after surgery. 1. Mean intercondylar distance was $84.42{\pm}5.30mm$ and horizontal long axis of condylar angle was $12.79{\pm}4.92^{\circ}$ on the right, $13.53{\pm}5.56^{\circ}$ on the left side. Condylar lateral poles were located about 12mm and medial poles about 7mm away from the reference line(AA') on the axial tomogram. Mean intercondylar distance was $83.15{\pm}4.62mm$ and vertical axis angle of condylar angle was $76.28{\pm}428^{\circ}$ on the right, $78.30{\pm}3.79^{\circ}$ on the left. 2. In amount of set back, We found the condylar change(T2C-T1C) which had increasing tendency in group III (amount of setback : 10-15mm). but there was no statistical significance(p>0.05). 3. There was some correlation between condylar change(T2C-T1C) and TMJ dysfunction. It seemed that postoperative condylar change had influenced postoperative TMJ dysfunction, through there was no statistical significance (p>0.05). As we have observed the change of condylar axis in the group that complained of TMJ dysfunction in cases of large amount of mandibular setback. So we consider that the more trying to conserve condylar position will decrease occurrence rate of post operational TMJ dysfunction.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.656-661
• /
• 2016

Manufacturing membrane materials with high selectivity and permeability is quite desirable but practically not possible, since the permeability and selectivity are usually inversely proportional. From the viewpoint of reducing the cost of $CO_2$ capture, module performance is even more important than the performance of membrane materials itself, which is affected by the permeance of the membrane (P, stagecut) and selectivity (S). As a typical example, when the mixture with a composition of 13% $CO_2$ and 87% of $N_2$ is fed into the module with 10% stage cut and selectivity 5, in the 10 parts of the permeate, $CO_2$ represents 4.28 parts and $N_2$ represents 5.72 parts. In this case, the $CO_2$ concentration in the permeate is 42.8% and the recovery rate of $CO_2$ in this first separation appears as 4.28/13 = 32.9%. When permeance and selectivity are doubled, however, from 10% to 20% and from 5 to 10, respectively, the $CO_2$ concentration in the permeant becomes 64.5% and the recovery rate is 12.9/13 = 99.2%. Since in this case, most of the $CO_2$ is separated, this may be the ideal condition. For a given feed concentration, the $CO_2$ concentration in the separated gas decreases if permeance is larger than the threshold value for complete recovery at a given selectivity. Conversely, for a given permeance, increasing the selectivity over the threshold value does not improve the process further. For a given initial feed gas concentration, if permeance or selectivity is larger than that required for the complete separation of $CO_2$, the process becomes less efficient. From all these considerations, we can see that there exists an optimum design for a given set of conditions.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.4
• /
• pp.148-165
• /
• 2015

The Cultural Properties Protection Law Act 1962 has been achieving its role for systematic preservation, management and application of the cultural heritage under rapid economic growth circumstances through continuing revisions. Introduced the influence review system for cultural heritages in 2000, and legislated the guideline for the state-change allowance standard for the National Cultural Heritage in 2006 in specific, the law has been contributing significantly for the cultural properties and historical/cultural environment preservation, along with increase in administrative efficiency and improvement on settlement environment. However, increase in public awareness about the cultural property's value and the needs for the local revitalization by utilizing the heritages, while some allowance standard not peoperly delivering the surrounding conditions, such as the value of the properties and their substantial characteristics, land utilization, etc. being applied, complaints from the local residents are increasing continuously. Thus this research focuses on clear vision/value of the heritage and apply them to create the review criteria for the state-change allowance per heritages. Here we set the Focus of Landscape Management Indicators in order to actively preserve and manage the physical characteristics and the native value by analyzing the Cultural Heritage Protection Laws and related guidelines, manuals and research papers, and redesign the cultural propertiy's classification scheme and propose the Review Standard for state-change from the view point of changing the current state. With this research, we expect increase in the satisfaction for the Property management system with public understanding promotion regarding the Standards by applying the reviewed state-change allowance Standards, white securing the consistency for the review criteria as well as the systematic management of historical/cultural environment with their typification characteristics and the value for short-term.

• Radiation Oncology Journal
• /
• v.13 no.1
• /
• pp.95-100
• /
• 1995

Purpose : To evaluate the effect on surface dose due to Aquaplast used for immobilizing the patients with head and neck cancers in photon beam radiotherapy Materials and Methods: To assess surface and buildup region dose for 6MV X-ray from linear accelerator(Siemens Mevatron 6740), we measured percent ionization value with the Markus chamber model 30-329 manufactured by PTW Frieburg and Capintec electrometer, model WK92. For measurement of surface ionization value, the chamber was embedded in $25{\times}25{\times}3cm^3$ acrylic phantom and set on $25{\times}25{\times}5cm^3$ polystyrene phantom to allow adequate scattering. The measurements of percent depth ionization were made by placing the polystyrene layers of appropriate thickness over the chamber. The measurements were taken at 100cm SSD for $5{\times}5cm^2$, $10{\times}10cm^2$ and $15{\times}15cm^2$ field sizes, respectively. Placing the layer of Aquaplast over the chamber, the same procedures were repeated. We evaluated two types of Aquaplast: 1.6mm layer of original Aquaplast(manufactured by WFR Aquaplast Corp.) and transformed Aquaplast similar to moulded one for immobilizing the patients practically. We also measured surface ionization values with blocking tray in presence or absence of transformed Aquaplast. In calculating percent depth dose, we used the formula suggested by Gerbi and Khan to correct overresponse of the Markus chamber. Results : The surface doses for open fields of $5{\times}5cm^2$, $10{\times}10cm^2$, and $15{\times}15cm^2$ were $79\%$, $13.6\%$, and $18.7\%$, respectively. The original Aquaplast increased the surface doses upto $38.4\%$, $43.6\%$, and $47.4\%$, respectively. For transformed Aquaplast, they were $31.2\%$, $36.1\%$, and $40.5\%$, respectively. There were little differences in percent depth dose values beyond the depth of Dmax. Increasing field size, the blocking tray caused increase of the surface dose by $0.2\%$, $1.7\%$, $3.0\%$ without Aquaplast, $0.2\%$, $1.9\%$, $3.7\%$ with transformed Aquaplast, respectively. Conclusion: The original and transformed Aquaplast increased the surface dose moderately. The percent depth doses beyond Dmax, however, were not affected by Aquaplast. In conclusion, although the use of Aquaplast in practice may cause some increase of skin and buildup region dose, reductioin of skin-sparing effect will not be so significant clinically.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.357-365
• /
• 2009

On the purpose to improve the milling efficiency as well as head-rice percentage after milling, an experiment to improve the removal ability of immature kernels in the immature brown rice separator (IBRS) was performed focused on varietal characteristics. The removal ability of immature grains by the IBRS was absolutely depending on kernel thickness of brown rice. The kernel thickness of the tested rice varieties distributed from 1.79 mm in Nonganbyeo to 2.16 mm in Daeribbyeo 1. Although there were some variation among rice varieties, it was roughly suggested that the suitable sieve-slit widths for good separation of the immature kernels were 1.9 mm for the varieties thicker than 2.08 mm in thickness, 1.8 mm for the varieties with 2.00-2.08 mm thickness, 1.7 mm for the varieties with 1.90-2.00 mm thickness, and 1.60-1.65 mm for the varieties thinner than 1.7 mm. It was found out that the higher the proportions of immature kernels in brown rice, the more conspicuous the improvement of milling efficiency as well as head rice rates by their removals. With increasing the sieve slit-widths beyond an optimum range, the losses of mature grains increased sharply. For effective separation of immature kernels, it was suggested that the optimum sieve-slit width should be set up depending on both of the kernel thickness and the critical loss limit of mature kernel.

• Asia pacific journal of information systems
• /
• v.20 no.2
• /
• pp.125-155
• /
• 2010

Ontologies have been adopted in various business and scientific communities as a key component of the Semantic Web. Despite the increasing importance of ontologies, ontology developers still perceive construction tasks as a challenge. A clearly defined and well-structured methodology can reduce the time required to develop an ontology and increase the probability of success of a project. However, no reliable knowledge-engineering methodology for ontology development currently exists; every methodology has been tailored toward the development of a particular ontology. In this study, we developed a Graduation Screen Ontology (GSO). The graduation screen domain was chosen for the several reasons. First, the graduation screen process is a complicated task requiring a complex reasoning process. Second, GSO may be reused for other universities because the graduation screen process is similar for most universities. Finally, GSO can be built within a given period because the size of the selected domain is reasonable. No standard ontology development methodology exists; thus, one of the existing ontology development methodologies had to be chosen. The most important considerations for selecting the ontology development methodology of GSO included whether it can be applied to a new domain; whether it covers a broader set of development tasks; and whether it gives sufficient explanation of each development task. We evaluated various ontology development methodologies based on the evaluation framework proposed by G$\acute{o}$mez-P$\acute{e}$rez et al. We concluded that METHONTOLOGY was the most applicable to the building of GSO for this study. METHONTOLOGY was derived from the experience of developing Chemical Ontology at the Polytechnic University of Madrid by Fern$\acute{a}$ndez-L$\acute{o}$pez et al. and is regarded as the most mature ontology development methodology. METHONTOLOGY describes a very detailed approach for building an ontology under a centralized development environment at the conceptual level. This methodology consists of three broad processes, with each process containing specific sub-processes: management (scheduling, control, and quality assurance); development (specification, conceptualization, formalization, implementation, and maintenance); and support process (knowledge acquisition, evaluation, documentation, configuration management, and integration). An ontology development language and ontology development tool for GSO construction also had to be selected. We adopted OWL-DL as the ontology development language. OWL was selected because of its computational quality of consistency in checking and classification, which is crucial in developing coherent and useful ontological models for very complex domains. In addition, Protege-OWL was chosen for an ontology development tool because it is supported by METHONTOLOGY and is widely used because of its platform-independent characteristics. Based on the GSO development experience of the researchers, some issues relating to the METHONTOLOGY, OWL-DL, and Prot$\acute{e}$g$\acute{e}$-OWL were identified. We focused on presenting drawbacks of METHONTOLOGY and discussing how each weakness could be addressed. First, METHONTOLOGY insists that domain experts who do not have ontology construction experience can easily build ontologies. However, it is still difficult for these domain experts to develop a sophisticated ontology, especially if they have insufficient background knowledge related to the ontology. Second, METHONTOLOGY does not include a development stage called the "feasibility study." This pre-development stage helps developers ensure not only that a planned ontology is necessary and sufficiently valuable to begin an ontology building project, but also to determine whether the project will be successful. Third, METHONTOLOGY excludes an explanation on the use and integration of existing ontologies. If an additional stage for considering reuse is introduced, developers might share benefits of reuse. Fourth, METHONTOLOGY fails to address the importance of collaboration. This methodology needs to explain the allocation of specific tasks to different developer groups, and how to combine these tasks once specific given jobs are completed. Fifth, METHONTOLOGY fails to suggest the methods and techniques applied in the conceptualization stage sufficiently. Introducing methods of concept extraction from multiple informal sources or methods of identifying relations may enhance the quality of ontologies. Sixth, METHONTOLOGY does not provide an evaluation process to confirm whether WebODE perfectly transforms a conceptual ontology into a formal ontology. It also does not guarantee whether the outcomes of the conceptualization stage are completely reflected in the implementation stage. Seventh, METHONTOLOGY needs to add criteria for user evaluation of the actual use of the constructed ontology under user environments. Eighth, although METHONTOLOGY allows continual knowledge acquisition while working on the ontology development process, consistent updates can be difficult for developers. Ninth, METHONTOLOGY demands that developers complete various documents during the conceptualization stage; thus, it can be considered a heavy methodology. Adopting an agile methodology will result in reinforcing active communication among developers and reducing the burden of documentation completion. Finally, this study concludes with contributions and practical implications. No previous research has addressed issues related to METHONTOLOGY from empirical experiences; this study is an initial attempt. In addition, several lessons learned from the development experience are discussed. This study also affords some insights for ontology methodology researchers who want to design a more advanced ontology development methodology.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.2
• /
• pp.118-131
• /
• 1997

An opening efficiency experiment of anchovy boat seine has been carried out using a half size of the ordinary seine to reduce the size of the seine net and to improve the fishing efficiency from field operation. The intervals of towing boats were set at 100, 200 and 300m, and the towing speed, at 0.6, 0.9, and 1.2k't by possible combinations of them. The vertical openings of wing net, inside wing net, bagnet and flapper as well as the spreads of the seine net and the towing tension of the warp were measured, to find out efficient fishing gear and method of the anchovy boat seine. The results obtained are as follows : 1. The vertical opening of the inside wing net ranged from 8.7m to 12.0m at the normal current and from 7.0m to 10.0m at the counter current, and that of the wing net, from 8.4m to 19.8m at the normal current and from 4.9m to 16.3m at the counter current. The vertical opening of the wing net and inside wing net decreased as the towing speed and intervals of the boats increase, from 66% to 16% and from 32% to 18% of the normal opening, respectively. 2. The vertical opening of the fore of bag net ranged from 7.9m to 12.8m at the normal current and from 7.4m to 9.7m at the counter current, and that of the flapper, from 3.4m to 5.1m at the normal current and from 4.4m to 5.1m at the counter current, and that of the flapper, from 3.4m to 5.1m at the normal current and from 4.4m to 5.1m at the counter current. The vertical opening of the bag net was from 98% to 57% of the normal opening and the flapper showed a circular shape and it rose up to the upper layer with a slower towing speed. 3. The vertical opening of the end of the bag net ranged from 7.1m to 9.3m at the normal current and from 7.4m to 8.8m at the counter current. The end of the bag net rose up to the upper layer, This phenomenon was more apparent as the towing speed and the interval of the boats increase. 4. The towing tension of the experimental nets increased from 648kg to 2,716kg at the normal current and from 1,050kg to 6,010kg at the counter current with increasing towing speed. 5. The net depth of the anchovy seine was stable with the higher towing speed and the wider interval of the boats, but it was unstable by rising up to the upper layer with the lower towing speed and the narrower interval of towing boats.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this study is to propose plans to increase the number of urban parks as a way to help absorb carbon in order to implement the low carbon green city goals of Gangneung. As a study method, park incentive areas and current park areas were set as parameters and the areas of lacking in park space were categorized according to each indicator. The degree of park shortage was classified by overlapping the park shortage areas. Once the areas needing parks were assessed according to priority, target sites were selected on sites where construction would be actually possible. First, results of analysis showed that Songjeong-Dong and Seongdeok-Dong to the east of the target site lacking park space due to old residences and high population density or industrial use areas, were the most severe in the degree of park shortage. It was also shown that areas with high population density and park shortages included the Ponam-Dong, Okcheon-Dong and Hongje-Dong areas. Accordingly, the east side of the target areas and Hongje-Dong were both considered as high-priority areas needing to increase park space and actual possible target sites were selected for the creation of new, small parks in industrial areas by creating parks in school yards, in facility relocation sites and legal reviews. In addition, analysis indicators of park shortages were re-evaluated according to the securing of the park and it was shown that the problems in park shortages were resolved with the proper positioning of parks. In addition, satisfaction in the area of park per person, $3m^2$ was at a higher than a certain level in all areas except Songjeong-Dong, demonstrating that the park areas were evenly distributed. Areas of park shortage were shown in part of Songjeong-Dong and Seongdeok-Dong. This could be resolved by using alternative park resources such as the adjacent Gyeongpo Provincial Park, the beach and Namdaecheon.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.17-23
• /
• 2008

Purpose: Cone-beam CT using linear accelerator attached to on-board imager is a image guided therapy equipment. Because it is to check the patient's set-up error, correction, organ and target movement. but imaging dose should be cause of the secondary cancer when taking a image. The aim of this study is investigation of appropriate cone beam CT scan mode to compare and estimate the image quality and skin dose. Materials and Methods: Measurement by Thermoluminescence dosimeter (TLD-100, Harshaw) with using the Rando phantom are placed on each eight sites in seperately H&N, thoracic, abdominal section. each 4 methods of scan modes of are measured the for skin dose in three time. Subsequently, obtained average value. Following image quality QA protocol of equipment manufacturers using the catphan 504 phantom, image quality of each scan mode is compared and analyzed. Results: The results of the measured skin dose are described in here. The skin dose of Head & Neck are measured mode A: 8.96 cGy, mode B: 4.59 cGy, mode C: 3.46 cGy mode D: 1.76 cGy and thoracic mode A: 9.42 cGy, mode B: 4.58 cGy, mode C: 3.65 cGy, mode D: 1.85 cGy, and abdominal mode A: 9.97 cGy, mode B: 5.12 cGy, mode C: 4.03 cGy, mode D: 2.21 cGy. Approximately, dose of mode B are reduced 50%, mode C are reduced 60%, mode D are reduced 80% a point of reference dose of mode A. the results of analyzed HU reproducibility, low contrast resolution, spatial resolution (high contrast resolution), HU uniformity in evaluation item of image quality are within the tolerance value by recommended equipment manufacturer in all scan mode. Conclusion: Maintaining the image quality as well as reducing the image dose are very important in cone beam CT. In the result of this study, we are considered when to take mode A when interested in soft tissue. And we are considered to take mode D when interested in bone scan and we are considered to take mode B, C when standard scan. Increasing secondary cancer risk due to cone beam CT scan should be reduced by low mAs technique.