• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1601-1604
• /
• 2005

The demand increasing of optical applications like as display devices derives interest for fabrication process. The product s development is apt to fabricate numerous thin and wide surfaces with micro pattern. Naturally that needs injection molding fabrication for the mass production. In existing manufacturing, the product quality is controlled by input fabrication condition from the outside. That can be called as a try and error method and not fundamentally solve the troubles; imperfect replication, war page, short shot, etc. To understand the cause and bring a solution, it is needed that check of changing in the cavity. This study can catch them. Data acquisition system about temperature and pressure distribution is settled and can get some data. From this research, other studies related with DAQ in cavity can start on the easier step.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.529-540
• /
• 2018

As the equipment of the military has recently become more sophisticated and expensive, the cost of purchasing spare parts is also steadily increasing. Therefore, demand forecast accuracy is also becoming an issue for the effective execution of the spare parts budget. This study predicts the demand by using the data of spare parts consumption of the KF-16C fighter which is being operated in the Republic of Korea Air Force. In this paper, SARIMA(Seasonal Autoregressive Integrated Moving Average) is applied to seasonal data after dividing the spare parts consumptions into seasonal data and non-seasonal data. Proposing new methods, Majority Voting and Hybrid Method, to the non-seasonal data which consists of spare parts of low consumption with unclear pattern, We want to prove that the demand forecast accuracy of spare parts improves.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2451-2454
• /
• 2005

In recent years, the importance of the characterization of fall for a fracture prevention system keeps increasing since fracture from a fall can lead to serious health problems. Fall is one of the major sources which increase morbidity in elderly people. In terms of the cost and the influence to the quality of life, the most serious injury with hip fractures is caused by falls. The traditional methods in characterizing fall patterns have been mainly by the epidemiological surveys. With surveys, the exact data of fall patterns can not been acquired. In this paper, we measured and analyzed with the parameters related to fall pattern such as velocities and accelerations during the motion of falls using 3D motion capture program. We acquired the parameters of the fall pattern of intentional and unexpected fall. The result showed that the variation of velocity and acceleration during fall was very important in characterizing fall pattern, which of vital importance for the development of a fracture prevention system and for the safety of the elderly.

• 한국인터넷방송통신학회논문지
• /
• 제17권1호
• /
• pp.173-181
• /
• 2017

산업이 발달함에 따라서 빅데이터가 무수히 생산되고 있으며 이에 따라서 데이터에 내재된 불확실성도 증가하고 있다. 본 논문에서는 데이터에 내재된 불확실성을 다루기 위해 interval type-2 퍼지 클러스터링 방법을 제안하고 이를 이용하여 퍼지뉴럴네트워크를 설계하고 최적화한다. 제안한 클러스터링 방법을 이용하여 퍼지 규칙을 설계하고 학습을 수행한다. 최적화하는 방법으로서 유전자 알고리즘을 이용하고 모델 파라미터들을 최적 탐색한다. 실험에서는 두 가지 패턴 분류를 시행하였으며 두 가지 실험 모두 우수한 패턴 인식 결과를 보여준다. 제안한 네트워크는 증가하는 불확실성을 다룰 수 있는 방법을 제공할 수 있을 것이다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권14호
• /
• pp.5691-5695
• /
• 2015

Background: Continuous surveillance of pattern of blood stream infection is necessary in febrile neutropenia (FN)especially with the recent escalating trend in the management of pediatric cancer patients towards intensified regimens and with the increase in infections caused by resistant organisms limiting the choice of antibiotics. Aim: To monitor change in pattern of blood stream infections (BSI) in FN pediatric cancer patients. Materials and Methods: Surveillance of FN episodes with positive BSI was prospectively monitored and compared to a previous surveillance in the same pediatric oncology unit. Results: A total of 232 BSI positive episodes were documented in 192 patients during a 6 months period. The results of recent surveillance analysis showed an increase in intensified regimens of chemotherapy, antimicrobial resistance, fungal infections, and prolonged duration of episodes when compared to previous surveillance, with p value sof <0.001, 0.005, 0.021, and <0.001, respectively. There was an apparent decrease in the crude mortality but this was not statistically significant, to 6% in 2011 from 10 % in 2006. Conclusions: The pattern of BSI at our institution is still inclining towards gram positive organisms but is showing a shift towards more antibiotic resistance and fungal infections.

• Computers and Concrete
• /
• 제18권6호
• /
• pp.1135-1151
• /
• 2016

For investigating the effect of the pre-existing joints on the initiation pattern of hydraulic fractures, the numerical simulation of circular holes under internal hydraulic pressure with a different pattern of the joint distributions are conducted by using a finite element code, FRANC2D. The pattern of hydraulic fracturing initiation are scrutinized with changing the values of the joint length, joint offset angle. The hydraulic pressures with 70% of the peak value of borehole wall breakout pressure are applied at the similar models. The simulation results suggest that the opening-mode fracture initiated from the joint tip and propagated toward the borehole for critical values of ligament angle and joint offset angle. At these critical values, the crack grow length is influenced by joint ligament length. When the ligament length is less than 3 times the borehole diameter the crack growth length increases monotonically with increasing joint length. The opening-mode fracture disappears at the joint tip as the ligament length increases.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권1호
• /
• pp.79-83
• /
• 1991

Diurnal variation in faecal chromic oxide levels was estimated from 4 hourly faecal sampling of 56 wethers allotted to one of six different feeding patterns. Sampling occurred on days 6 and 7 (Period 1) after a controlled release device was administered, and was repeated on days 14 and 15 (Period 2) following re-randomisation of the wethers to the feeding patterns. Increasing the frequency of feeding tended to be associated with higher faecal chromic oxide levels (p < 0.05), particularly in wethers fed thrice daily at 8 hour intervals. There was no interaction between feeding pattern and period, sampling day or time within-day. There were significant period x time within-day (p < 0.05) and day x time within-day (p < 0.001) interactions, indicating that variation in faecal chromic oxide between sample times was not consistent. This implies that sampling at any time of day is unlikely to result in a biased estimate of pasture intake, providing sufficient samples are collected. Significant period (p < 0.001) and period x day (p < 0.01) effects were associated with slow faecal chromic oxide equilibration in period 1. Equilibration did not occur until after day 7, indicating a need for caution when commencing sampling.

• 한국음향학회지
• /
• 제35권4호
• /
• pp.288-294
• /
• 2016

타이어와 휠가드 사이의 공간은 타이어 패턴음의 전달경로가 된다. 본 논문에서는 타이어-휠가드 공간에서 발생하는 음향현상을 음장모드 분석과 휠 가드 표면에서 음압분포 가시화를 통해 규명하였다. 타이어 패턴음 저감을 위해 음향학적 댐퍼 역할을 수행하는 캐비티를 휠가드 표면상에 적용하였다. 실내소음은 2 dB(A) 감소하였는데, 본 연구에서 다룬 소음저감방법은 완성차 단계에서 원가/중량의 증가없이 실내음질을 개선하는 효과적인 방안이 될 것이라고 판단된다.

• 복식
• /
• 제54권4호
• /
• pp.129-144
• /
• 2004

The modems who lives complicated society, the silence which the Orient thought asserts leads and to get comfortable. It is becoming, the like this social atmosphere will in the interest regarding a manual example and the Orient material, the use of the embroidery textile goods is increasing specially. The purpose of this article is to suggest a model for development of machine embroidery fabric material and highly value added apparel industries. The multi-headed embroidery machine where the application scope is wide from the dissertation, we are requested' NaNa company'. The multiheaded embroidery machine uses TAJIMA TMFD-G620 and SUNSTAR SWF-／B-WD(X) 620-100 the embroidery textile uses the silk, the cotton and the synthesis fertile goods etc 24 type, the embroidery thread Maraton thread(viscose rayon 100％) with used the cord. The 8 Korean motives are made on 23 fabrics, 6 of which are full-sized manufactured one-pieces and the other 17 of which are produced to home interior goods such as curtains or fashion accessories like handbags as simulations. Among the products, the pattern-4-1 and the pattern-4-2 are contracted with local fashion industry, and the pattern-1-1～3 are dealing with other companies in Japan. The computerized machine-embroidering and simulation producing of fashion items are available to reduce the cost in making samples and transfer the old labor ＆ toil-centered industry into the new technique ＆ knowledge centered one.

• 한국의류학회지
• /
• 제19권2호
• /
• pp.242-263
• /
• 1995

The study was to find out the current situation of supply and demand of apparel CAD systems in Korea. Also it was hoped to gather any valuable information about the current usage of apparel CAD systems for the development of the enhanced apparel CAD system. Three interviews were carried out for the study. The first interview with the importing agents was to find out the apparel CAD system's supplying situation. The second interview with the users of apparel CAD system was about the usage of the systems and related informations. The last interview was about the pattern making facilities, which was pointed out by the users to be the most inconvenient part of apparel CAD systems. The results of the survey were: 1. The supply and demand of apparel CAD systems is increasing. 2. The education, training, maintenance of the system should be improved by the supplier. 3. Apparel CAD systems are used for various production systems in the apparel industry. 4. 100% of the systems are utilized for pattern input and 89% of the systems are utilized for marker making. Only 15% of the systems are utilized in pattern making process, which 80% of the users realize to be computerized. 5. The most serious barrier to the better usage of the system is the communication with the system in foreign language. This barrier could be lifted when Korean apparel CAD system is developed.