• Journal of Information Technology Applications and Management
• /
• 제14권3호
• /
• pp.1-14
• /
• 2007

Recently. interests in IT Service Management (ITSM) are increasing internationally as well as domestically. In order to realize the benefits from ITSM, it is necessary to institutionalize it as a culture of the organization through effective change management. One of the most promising approach of effective change management is a Six Sigma technique. In this study, we analyze a success case in which 6 Sigma was applied to Service Desk function which is one of the most important functions of ITSM. Through the analyses, this study aims to propose a feasible and specific approach to institutionalize ITSM. To accomplish the objective. the study analyzed specific methods of application of 6 Sigma to ITSM. performance of the project and future directions based on interview and project document/deliverable review. This study could not provide detailed performance measures due to lack of previous research on this topic and difficulty of obtaining quantitative data. However. this study has contributed to proposing a direction to institutionalize ITSM in organizations by analyzing a feasibility of 6 Sigma in implementing ITSM.

• 대한안전경영과학회지
• /
• 제3권2호
• /
• pp.113-121
• /
• 2001

Today, facilities are composed of many complex components or parts. Because of this characteristics, the frequency of failures is decreasing, but the strength of failures is increasing; therefore, the failure analysis about many complex components or parts was needed. In the former research about Fault Tree Analysis, failure data of similar facilities have been used for forecasting about target system or components, but in case that the system or components for forecasting failure is new or qualitative and quantitative data are given simultaneously, there are many difficulty in using Fault Tree Analysis with this incorrect failure data. Therefore, this paper deal with the Fault Tree Analysis method which be applied with Fuzzy theory in above case. In case that , therefore, if there is no the correct failure data, it is represented a system or components as qualitative variable. subsequently, it converted to the quantitative value using fuzzy theory, and the values used as the value for failure forecast.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(역학)
• /
• pp.188-195
• /
• 1994

To an increasing extent, case-control studies are being undertaken to determine if use of early detection procedures is associated with reduced mortality from cancer. The authors recommend that in such studies the analysis focus on screening activity in cases that occurs during an interval prior to diagnosis in which the cancer is believed to be detectable and still curable and to a corresponding time period in controls. This approach places a heavy burden on the investigator to estimate accurately the period during which the tumor ought to be detectable using the test in question and to sort out reliably tests done in response to signs or symptoms of the cancer from screening tests per se. Nonetheless, the authors feel that it offers the greatest ability to discern a true benefit of screening, while minimizing the numerous potential biases that can be present in this type of study.

• 한국조경학회:학술대회논문집
• /
• 한국조경학회 2007년도 Journal of Landscape Architecture in Asia Vol.3
• /
• pp.197-201
• /
• 2007

In recent years in Japan, derelict land by aging fanners has increased at the same time as the desire of city dwellers for a more natural, leisurely lifestyle. In response, an increasing number of citizens' farms(or 'allotment gardens') have opened in and around urban areas. Citizens' farms with overnight accommodation are known as 'kleingartens'. As a case study, we evaluated a kleingarten in the town of Suo-oshima by interviewing the resident caretaker and conducting a questionnaire survey of facility users. Our survey revealed a number of ways in which the facility could be improved to meet user needs. The case study also suggested that kleingartens are an effective means of revitalizing local communities in rural areas.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.495-499
• /
• 2008

Last year UMTS (UMTS: Universal Mobile Telecommunication System) 3G service started and these days 3 its service subscribers sharply increased. Now totally we have been increasing 13 million subscribers, every month 0.8 million people join 3G Service. MSC (Mobile Switching Center) is most important equipment in 3G system, so we call it 'core' network. Higher capacity MSC required to accommodating 1 million subscribers. It is very important whether MSC can accommodate maximum subscriber or not. So systematic analysis, reliable test results are required. This article presents WCDMA MSC performance evaluation case. This would be some direction for designing and developing some communication equipment. This Case Study demonstrates our MSC system performance.

• Wind and Structures
• /
• 제28권3호
• /
• pp.191-201
• /
• 2019

In this paper, the aerodynamic analysis of a vertical axis wind turbine was carried out by CFD approach to optimize the turbine performance. To perform numerical simulation, SST-Transition turbulence model was used, which demonstrated more precise results compared to non-transition models. A parametric study was conducted to optimize the VAWT performance based on the selected model. The investigation of pitch angle changes showed that the highest power produced by the turbine occurs at $2^{\circ}$ angle. Considering the effect of the rotor's arm junction to the airfoil showed that by increasing the distance of the junction from the edge of the airfoil from 25 cm to 40 cm, the power of the turbine increases by 60%. However, further increase in this distance results in power decrease. Based on the proposed numerical model, a case study was conducted to consider the installation of four VAWTs in the southwest corner of the medical science building at TMU campus with a height of 42m. The results of the simulation showed that 8.27 MWh energy is obtainable annually.

• Journal of Trauma and Injury
• /
• 제35권4호
• /
• pp.277-281
• /
• 2022

Craniocerebral gunshot injuries is gradually increasing in the civilian population with a worse prognosis than closed head trauma. We experienced a case of craniocerebral gunshot injury which a bullet penetrating from the submandibular area into the clivus of a patient. The patient did not show any symptom. However, serial laboratory findings showed an increase in blood lead level. We removed foreign bodies without any problems using an endoscopic transnasal transclival approach. Due to the extremely low frequency, guidelines for definitive management of gunshot injuries have not been presented in Korea yet. We introduce our surgical experience of a craniocerebral gunshot injury with an unusual approach for removing intracranial foreign bodies.

• Journal of Information Technology Applications and Management
• /
• 제30권2호
• /
• pp.31-44
• /
• 2023

Family businesses play a significant role in the overall economy of all countries, and the importance and weight of family businesses are increasing in various fields. Many factors are essential for a family business to grow into a long-lived business, that is, a sustainable business, but the most important one is succession. TRUST Lab at Hanyang University studied the importance of factors influencing the succession of the family business from the standpoint of the successor. As a result, it was confirmed that mutual trust is the most crucial factor, and conflict can destroy that trust. Therefore, in this study, we research conflict as a central topic for successful succession, which is the most fundamental reason for family businesses. This study was conducted as a qualitative research case study. By setting criteria suitable for the purpose of the study, we conducted interviews with ten successors who either worked or planned to work in a family-related company. Through this study, conflict management of key players is the most important to achieve a continuous succession of family businesses.

• 한국건축시공학회지
• /
• 제12권2호
• /
• pp.133-141
• /
• 2012

As we move from the industrial age to the information age, domestic industries are changing rapidly, and rural society is also laying the foundation to make use of information technologies. Through this kind of modernization, the size of agricultural facilities has been increasing on a significant scale. But, in reality, there are many difficulties in the maintenance of agricultural facilities in proportion to their growing number. Accordingly, this research aims to solve the fundamental problems that occur with agricultural facilities in the maintenance stage. In addition, it aims to provide information on how to maintain and manage facilities for farmers. The presentation of the maintenance information was conducted using a case-based reasoning method that solves current problems based on past cases. The tool of case-based reasoning was applied to define the establishment of the base for cases, characteristic variables and maintenance measures. The effectiveness of a CBR model was examined through the case study. The use of the case-based reasoning method is judged to be effective as a tool to support the decisions of farmers regarding maintenance. When the maintenance measures derived through the CBR model are offered to farmers, the fundamental problems of maintaining agricultural facilities will be solved, and the damage to such facilities minimized.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2637-2649
• /
• 1996

Flow characteristics and aerodynamic forces acting on an elliptic cylinder placed in a plane boundary layer were investigated experimentally. Four cylinder models with axis ratio(major axis to minor axis, AR=A/B) of 1, 2, 3, and 4 having the same equivalent diameter were used in this experiment. The Reynolds number based on the equivalent diameter $D_e$(=20mm) was 13,000. In the case of circular cylinder, regular vortex shedding occurs for the cylinder gaps larger than G/B=0.3 and is not almost related to the boundary layer thickness. But, for the elliptic cylinders, the vortex shedding frequency is increased with increasing the gap ratio (G/B) and the axis ratio (AR) of elliptic cylinders. The maximum drag coefficient acting on a circular cylinder is mainly affected by the boundary layer thickness. But, the elliptic cylinders(AR$\geq$2), except for the smaller gap G/B<0.2, show a nearly constant drag coefficient which is much smaller than that of a circular cylinder. The base pressure on the flat plate decreases with increasing the axis ratio(AR) of the elliptic cylinder. In the case of a circular cylinder, the base pressure has the minimum value at the gap ratio G/B=0.4, but it occurs at G/D=2 for elliptic cylinders. The mean velocity of the cylinder wake is quickly recovered at a small cylinder height ratio(H/$\delta$), but the turbulent intensity is rapidly recovered at a large cylinder height ratio(H/$\delta$). The effective wake region in the plane boundary layer is shrinkaged with increasing the axis ratio(AR) of elliptic cylinder. And the drag coefficient and streamwise turbulent intensity of the elliptic cylinder with AR=4 are less than half of those for the circular cylinder(AR=1).