• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.180-185
• /
• 2016

The incorporation of technological advances in the field of clinical orthodontics to increase treatment efficiency has led to the development of customized appliances (Insignia$^{(R)}$), archwires (Suresmile$^{(R)}$), and the production of devices to enhance tooth movement (Acceledent$^{(R)}$). This review presents a comprehensive study of the literature concerning these products, and analyzes the available evidence of their efficiency. To date, one pilot study has evaluated the efficiency of the Insignia$^{(R)}$ system, three retrospective studies have assessed the efficiency of the Suresmile$^{(R)}$ system, and a few Acceledent$^{(R)}$ reports have described its effect on treatment time. Critical appraisal of the reviewed papers revealed that the efficiency of the Insignia$^{(R)}$ system cannot be confirmed based on the available evidence, while the use of Suresmile$^{(R)}$ can reduce overall treatment time in simple cases. The acceleration of tooth movement by Acceledent$^{(R)}$ devices has not yet been confirmed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.691-694
• /
• 2004

The effects of polymer-cement ratio and antifoamer content on the setting time and durability of high-fluidity polymer-modified mortars using redispersible polymer powder are examined. As a result, the setting time of the polymer-modified mortars using redispersible polymer powder tend to delayed with increasing polymer-cement ratio, regardless of the antifoamer content. The water absorption and chloride ion penetration depth of the high-fluidity polymer-modified mortars using redispersible polymer powder decrease with increasing polymer-cement ratio and antifoamer content. The water absorption and chloride ion penetration improvement is attributed to the improved bond between cement hydrates and aggregates because of the incorporation of redispersible polymer powder.

• Earthquakes and Structures
• /
• 제26권4호
• /
• pp.269-283
• /
• 2024

When a reinforced concrete (RC) structure is exposed to a corrosive environment for an extended period of time, the material qualities deteriorate, resulting in a loss in seismic performance. Engineered Cementitious Composites (ECC) have been used to reinforce the corroded RC structure, which can achieve reinforcement effectiveness for a small change in cross-section size. In this work, finite element models of unjacketed RC pier and ECC jacketed pier were established and verified by experimental tests, with the buckling effect of longitudinal reinforcement considered. Compared with the unjacketed pier, the displacement of the pier top of the ECC jacketed pier was reduced by about 9.52% under earthquake action. In the case of moderate and major earthquakes, the probability of exceedance of ECC jacketed pier is significantly reduced. For the case of rare earthquake loading, with the ECC jacket, the e of the pier experiencing serious damage and complete damage states is reduced by 10.29% and 29.78%, respectively.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.306-315
• /
• 2017

This study introduces a software for real-time assessment of combustion stability for utility gas turbines. The software was written with LabView, and implemented the time-domain kurtosis as a parameter to proactively access the instantaneous combustion stability during operation of the industrial gas turbine. The simple time-domain assessment algorithm incorporated in the software is advantageous over conventional frequency-domain signal processing of dynamic pressure signal since it reduces the computational cost, thereby making the algorithm more appropriate for real-time monitoring of combustion stability. Benchmark data obtained from a model gas turbine combustor were used for the reproducibility test of the software. The assessment obtained from the software agreed well with previously published results, indicating that incorporation of the software could enhance the performance of systems monitoring the combustion stability for gas turbines during power generation.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.222-224
• /
• 2022

우리나라는 매년 2천껀이상의 화재와 매년 2천명 이상의 인명피해가 발생하고 있다. 본 연구는 AI드론이 소방차가 화재현장에 도착하기 전에 실시간 영상 이미지판독 YOLO5를 사용하여 차량이나 입간판등을 판단하여 119소방차의 집입을 원활히 할 수 있도록 조치를 취한다. 화재현장을 촬영하여 현장상황을 송출하고 연기의 성분을 분석하여 화재유형을 판단하여 화재진압시 시간을 단축 시킬 수 있다. 이로 인해 골든타임을 지켜 인명피해를 최소화 할 수 있을것으로 기대한다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.261-276
• /
• 1993

The purpose of this study was to evaluate for the cytotoxicity of glass-ionomer cement liners(GC liningcement, Ketac-bond, Vitrebond and Fuji lining LC) on the fibroblasts cultured from human pulp. The fibroblasts were cultured in DMEM-10% FBS medium. The measurement of pH, succinate dehydrogenase (SDH) activity test and $^{51}Chromium$ release test were performed. Viable cell count and $^{14}C$-leucine incorporation rate were evaluated following culture time of 2, 4 and 6 days. The results of this study were as follows : 1. The pH in all cements was to be neutralized as time elapsed, and Fuji lining LC was the lowest pH value among them. 2. SDH activity was more inhibited in GC lining cement and Vitrebond than Ketac-bond and Fuji lining LC with the setting process, and GC lining cement and Ketac-bond were reduced after 5 minute's setting and then elevated as time elapsed. 3. In SDH activity test following exposure time, the activity in Vitrebond, GC lining cement and Fuji lining LC was inhibited with increased exposure time, but it was fairly constant in Ketac-bond. 4. Overall the liquid component was more inhibited than the powder component of glass-ionomer cement in SDH activity test. 5. In $^{51}Cr$-release test, Fuji lining LC was the most released of all the cements tested and followed by : Vitrebond, Ketac-bond, GC lining cement. 6. In viable cell count, the number of cells increased as the culture day proceeded in Ketac-bond, but they decreased in GC lining cement. Fuji lining LC was only observed after 2 days culture and there was not observed the whole culture days in Vitrebond. 7. In $^{14}C$-leucine incorporation rate test, protein synthesis was decreased with the number of culture days in GC lining cement, Vitrebond and Fuji lining LC, but it was followed that of control in Ketacbond.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.517-527
• /
• 2021

While the two principles of lean manufacturing and time-driven activity-based costing (TDABC) have been established out of multiple incentives and do not follow the same particular targets, there is substantial commonality between them. In these conditions, the supply management of a multi-product system needs a rigorous production model to minimize costs. In this sense, this paper proposes an interactive model with the consideration of optimizing product-mix decisions using both lean development tools and TDABC. This paper proposes a qualitative approach using the case study of the Iraqi state company for battery production. The suggested model decreased manufacturing time and costs, along with some substantial reduction in idle production capacity by 26 percent in 2019, based on the findings of the case study. On the other hand, the proposed model gives two side advantages: an efficient division of costs on goods due to the use of time spent as a cost factor for products and cost savings due to the introduction of the lean manufacturing approach that reduces all additional costs and increases product-mix decisions. Furthermore, the analytical data gathered here suggests that the incorporation of lean management concepts and TDABC has a strong and important influence on product-mix decisions.

• 한국토양비료학회지
• /
• 제43권5호
• /
• pp.650-658
• /
• 2010

시설재배지의 경우 휴작기간 동안 녹비작물의 활용가능성이 높을 것으로 판단된다. 본 연구는 녹비작물이 시설재배지에서의 양분공급 및 토양질 개선에 미치는 영향을 평가하고자 두과 (헤어리베치, 크림손클로버) 및 화본과 (호밀, 수수, 수단그라스) 녹비작물을 재배 후 토양과 혼합하였으며, 무기질소 공급능과 생물적 지표로써 토양 탄수화물, 미생물활성 및 부식함량의 경시적 변화를 측정하였다. 관행구의 무기태 질소함량은 전 기간 비슷한 수준을 유지하였으나 녹비작물을 처리한 토양에서는 토양처리 후 4주까지 무기태질소 함량이 지속적으로 증가하였고, 특히 수단그라스에서 무기태질소 함량이 두드러지게 증가하였다. 녹비작물 처리 후 토양 중 수용성 당은 두과 녹비작물 처리 후 서서히 증가하기 시작하여 7주 경에 가장 높았으며 이후 서서히 감소하는 경향이 나타났다. 반면 화본과 녹비작물 처리 후 수용성 당이 빠르게 증가하여 처리 후 4주 경에 최대치에 도달한 후 감소하는 양상이 나타났다. 토양 내의 부식산 (humicacid)은 아무것도 첨가하지 않은 관행구와 녹비처리 초기에는 비슷한 수준으로 낮았으나 녹비처리 후 4주 정도 시간이 경과하면서 녹비작물의 부숙에 의해 형성된 부식산이 점점 증가하는 것을 확인할 수 있었다. 또한 양이온과 결합하여 물에 잘 용해되는 염을 만드는 fulvic 산에서도 작물 간 차이는 있었지만 부식산의 함량 변화와 비슷한 경향이었다.

• Applied Biological Chemistry
• /
• 제21권1호
• /
• pp.63-67
• /
• 1978

균일(均一)하게 표식(漂識)된 $C^{14}$-포도당을 산란계(産卵鷄)에 주사후(注射後) 혈장(血漿) 지질(脂質)로 방사능(放射能)이 병합(倂合)되는 상태(狀態)를 조사(調査)하였다. 혈장(血漿)에서 전지질(全脂質)을 추출(抽出)하는 방법(方法)은 Folch등(等)의 방법(方法)을 조금 변형(變型)하여 적용(適用)하였으며 방사능(放射能)의 측정(測定)은 액체(液體)신치레숀카운터에 의(依)하여 실시(實施)하였다. 공시(供試)한 산란계(産卵鷄)의 혈장(血漿) 지질(脂質)의 농도(濃度)는 추적자량(追跡子豊)의 $C^{14}$-포도당을 정맥(靜脈)에 주사(注射)한 후(後) 5분(分)에 채취(採取)한 시료(試料)에서 100m1당(當) 3.07g을 나타내었다. 포도당의 비방사능(比放射能)은 대수적(對數的)으로 급속(急速)하게 감소(減少)하는 반면(反面) kg체중당(體重當), 주사단위량당(注射單位量當), 그리고 혈장(血漿) 지질(脂質)의 그람 탄소원자량(炭素原子當) 비방사능(比放射能)은 주사후(注射後) 120분(分)까지 시간(時間)에 따라서 매우 서서(徐徐)히 증가(增加)하였다. 포도당의 방사능(放射能)으로부터 혈장(血漿) 지질(脂質)의 방사능(放射能)으로 병합(倂合)되는 율(率)은 주사후(注射後) 120분(分)까지 0.73%이었다.

• 한국환경농학회지
• /
• 제28권1호
• /
• pp.15-19
• /
• 2009

대기중으로 휘산되는 대부분의 암모니아는 농경지에서 시용하는 가축분뇨 퇴비와 질소비료에서 유래한다. 본 연구는 밭 토양에서 돈분 퇴비 시용방법에 따른 암모니아 휘산량을 소형원드터널 방법을 이용해서 정량적으로 평가하였다. 돈분 퇴비(20 Mg/ha) 표층살포(SA), 표층살포 후 즉시 경운(IRA), 표층 살포 3일 후 경운(RA-3d) 처리의 13일 동안 암모니아 휘산량은 각각 28.7, 8.7, 24.3 kg N/ha로 IRA 처리구는 SA 처리구에 비해 70% 저감효과를 가져왔다. 그리고 SA 처리구의 퇴비 처리 후 24시간 이내 휘산된 암모니아 양은 총 휘산량의 61%로 대부분의 암모니아는 시용 초기 짧은 시간 내에 휘산됨을 알 수 있었다. 석회와 퇴비 혼용시용 후 교반(L+C mix), 퇴비표층 살포 3일후 석회시용 교반(C+L3D), 석회시용 3일 후 퇴비시용 교반(L+C3D) 처리구의 22일 동안 총 암모니아 휘산량은 각각 40.1, 31.4, 27.7 kg/ha이었다. 따라서 가축분 퇴비 시용시 석회를 혼용하는 것은 피해야 하며, 만일 동일 작기내 시용이 불가피할 경우는 퇴비시용에 앞서 석회를 먼저 충분한 일수를 앞두고 시용하는 것이 암모니아 휘산량을 저감시킬 수 있다는 결론을 얻었다.