• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.45-50
• /
• 1997

An experimental study on LII signal images from soot particles in a flame has been carried out in order to investigate the effect of the incident laser characteristics. By changing the wavelength of the incident laser beam, the LII signal was saturated at smaller laser power with 532 nm than 1,064 nm. This implies that the larger absorption coefficient of soot particles at 532 nm would influence the LII signal characteristic. Using the deconvolution technique, the projected LII line images were coverted to reconstruct the local LII signals inside the beam. The results show that the LII images at ICCD camera result from the integration of LII signal across the laser beam.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.578-583
• /
• 2011

We report on the design of a holographic homogenizer composed of a periodic hologram and a condensing lens. If the hologram is periodic, the homogenizer is free from the alignment error of the incident laser beam. Holographic homogenizer also has an advantage of the flexibility in the size of the target beam. We calculated theoretically the Fraunhofer diffracted wave function when a rectangular laser beam is incident on a periodic hologram. The diffracted wave is the sum of sinc functions at regular distance. The width of each sinc function depends on the size of the incident laser beam and the distance between the sinc functions depends on the period of the hologram. We calculated numerically the diffracted light intensity for various ratios of the size of the incident laser beam to the period of the hologram. The results show that it is possible to make the diffracted beam uniform at a certain value of the ratio. The uniformity is high at the central part of the target area and low near the edge. The more sinc functions are included in the target area, the larger portion of the area becomes uniform and the higher is the uniformity at the central part. Therefore, we can make efficient homogenizer if we design a hologram so that the maximum number of the diffracted beams may be included in the target area.

• 비파괴검사학회지
• /
• 제12권1호
• /
• pp.16-24
• /
• 1992

Moire interferometry using a diffraction grating and a laser is a powerful technique for analizing small deformation of a specimen. In the method, the x and y-directional fringe patterns are obtained by using the x and y-directional sets of two beams. If the both sets of two beams are simultaneously incident to the specimen, the x and y-directional fringe patterns are super imposed. In this case, it is difficult to separate each directional fringe pattern. Therefore each fringe pattern has been separately recorded by selecting each set of two beams. In order to analyze a two-dimensional strain changing with time, Moire interferometry using the two-dimensional fourier transform method is proposed and the x and y-directional fringes are separated. By this method, the thermal deformation of a glass plate is analyzed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.641-642
• /
• 2006

Two-dimensional (2D) photonic quasicrystals (PQCs) were fabricated by a holographic nanolithography techniques. Using two laser beams with different angles incident on the sample, micro-cavities with 2D internal nanostructures are patterned with a few micrometer periods.

• 한국광학회지
• /
• 제5권1호
• /
• pp.106-112
• /
• 1994

Fabry-Perot 모델을 사용하여 광폭 다이오우드 레이저(broad-area diode laser ; BLD)에 대한 주입-잠금을 분석하였다. 일반적인 단일띠 다이오우드 레이저의 경우와 다르게, 주입되는 광을 약간 경사지게 하는 BLD의 경우는 BLD가 하나의 포화 이득 증폭기로서 동작한다고 볼 수 있으며, BLD의 양면에서의 다중 반사의 의한 중첩으로써 출력된 광을 해석할 수 있다. 1차원 Gaussian 광의 중첩에 의한 근거리와 먼 거리 분포를 구하였다. 또한, 입사 광의 주파수가 변화될 때 출력 광의 각도 변화를 계산하여 대역폭 약 120 GHz에 0.022도/GHz 혹은 10.37도/nm의 값을 얻었다.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.529-535
• /
• 2009

This paper describes a measuring device of glass thickness using machine vision and image processing techniques on real-time. Today, the machine vision enable to inspect fast and exactly than human's eyes. The presented system has advantages of continuous measurement, flexibility and good accuracy. The system consists of a laser diode, a CCD camera with PC. The camera located on the opposite side of the incident beam measures the distance between two reflected laser beams from the glass top and bottom surface. We apply a binary algorithm to convert and analyze the image from camera to PC. Laser point coordination by border tracing algorithm is used to find the center of beam circle. The measured result was compared with micrometer and showed 0.002mm accuracy. Finally, the errors were discussed how to minimize the influence of glass wedge angle and angular error of moving stage.

• 한국광학회지
• /
• 제25권4호
• /
• pp.200-206
• /
• 2014

본 논문에서는 직경 $125{\mu}m$의 싱글모드 광섬유에 입사된 빔을 다방향으로 방사하기 위하여 이론적으로 계산된 값을 광학설계 프로그램인 LightTools를 이용하여 광섬유 끝단에 원뿔형 구조물을 모델링 하고 입사된 모든 빔이 전반사 되어 측면으로 방사되는 광섬유 팁과, 전방과 측면으로 동시에 방사가 가능한 광섬유 팁에 대해 시뮬레이션을 하였다. 이러한 결과를 가지고 광섬유 끝단에 펨토초 레이저와 $CO_2$ 레이저를 이용하여 원뿔형 구조물을 제작하고 시뮬레이션 결과와 비교 분석하는 연구를 수행하였다.

• Current Optics and Photonics
• /
• 제8권4호
• /
• pp.416-420
• /
• 2024

A high-power Yb:YAG thin-disc laser with radial or azimuthal polarization incorporating an intracavity S-waveplate is reported. Depending on the rotational angle of the S-waveplate placed in the cavity, a Yb:YAG thin-disc laser yields 10.8 W and 10.2 W of continuous-wave outputs with radial and azimuthal polarization for an incident pump power of 131 W, corresponding to slope efficiencies of 22.9% and 23.7%, respectively. The output characteristics for each polarization state were investigated in detail by analyzing the insertion loss and the mode overlap efficiency due to the S-waveplate. Further prospects for power scaling will be discussed.

• 한국컴퓨터산업학회논문지
• /
• 제6권2호
• /
• pp.259-264
• /
• 2005

입사빔의 진폭과 위상에 관한 대기교란의 영향을 고려하며 크로스빔 레이저 속도계에 대한 광전류 상관함수의 표현식을 프린지 모델을 이용하여 유도 하였고, 그 결과 대기의 교란 입자가 프린지 모델에서 이동하는 광 전류 상관함수의 정현변화는 교란 상관함수로 부터 입자의 속도(산란입자는 속도V를 가져야 하는 것으로 가정하였다.)를 결정하는데 크게 영향을 주지 않는다.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.128-134
• /
• 2006

Two-dimensional nano-patterns are fabricated using immersion holographic lithography. The photoresist layer is exposed to an interference pattern generated by two incident laser beams($\lambda$=441.6 nm, He-Cd laser) of which the pitch size is less than 200 nm. Good surface profiles of the 2 dimensional patterns are achieved by trimming the lithography process parameters, such as, exposure time, developing time and refractive index of medium liquid.