• 제목/요약/키워드: in-plane screen flow

검색결과 8건 처리시간 0.022초

스크린 프린팅 기술을 적용한 피스톤 스커트의 브레이드 코팅공정에 관한 기초연구 - 사례연구 (A Basic Study on Blade Coating Process of Piston Skirt by Applying the Technology of Screen Printing - Case Study)

  • 전상명
    • Tribology and Lubricants
    • /
    • 제26권2호
    • /
    • pp.142-148
    • /
    • 2010
  • The purpose of this study is to find how to be formed the wet film thickness during the low friction coating process for a piston skirt with application to the theory of screen printing. In other words, in this research, it is to derive the general expressions predicting the pressure under a blade and the volume of coating fluid passing through the blade edge. Using these expressions, it is to be approved that the current operation characteristics of a screen printing system to a sample blade coating process for low friction coating on a piston skirt can be quantitatively assessed.

스크린 프린팅 기술을 적용한 피스톤 스커트의 브레이드 코팅공정에 관한 기초연구 - 매개변수 연구 (A Basic Study on Blade Coating Process of Piston Skirt by Applying the Technology of Screen Printing - Parametric Study)

  • 전상명
    • Tribology and Lubricants
    • /
    • 제25권6호
    • /
    • pp.414-420
    • /
    • 2009
  • In this study, using the general expressions predicting the pressure under a blade and the volume of coating fluid passing through the blade edge, it is predicted the change of the coating wet film thickness related with various parameters determining the characteristics of this blade coating process. Using the results of this research, it can be found the optimized coating wet film thickness taking into account the parameters related with various coating process on various metal surfaces will be able to be predicted.

PIV 기법을 이용한 프로펠러 후류의 3차원 유동 특성 연구 (Study on the Three Dimensional Flow Characteristics of the Propeller Wake Using PIV Techniques)

  • 백부근;김진;김경열;김기섭
    • 대한조선학회논문집
    • /
    • 제44권3호
    • /
    • pp.219-227
    • /
    • 2007
  • A stereo-PIV (particle image velocimetry) technique is used to investigate the vortical structure of the wake behind a rotating propeller in the present study. A four bladed propeller is tested in a cavitaion tunnel without any wake screen. Hundreds of instantaneous velocity fields are phase-averaged to reveal the three dimensional spatial evolution of the flow behind the propeller. The results of conventional 2-D PIV are also compared with those of the stereo-PIV to understand the vortical structure of propeller wake deeply. The variations of radial and axial velocities in the 2-D PIV results seem to be affected by the out-of-plane motion. generating a little perspective error in the in-plane velocity components of the slipstream. The strong out-of-plane motion around the hub vortex also causes the perspective error to vary the axial velocity component a little at the near wake region. The out-of-plane velocity component had the maximum value of about 0.3U0 in the tip vortices and continued its magnitude in the wake region.

메쉬 스크린을 이용한 초음속 제트소음 저감법에 관한 실험적 연구 (Study on Supersonic Jet Noise Reduction Using a Mesh Screen)

  • 권용훈;임채민;김희동
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제27회 추계학술대회논문집
    • /
    • pp.377-381
    • /
    • 2006
  • 본 논문에서는 노즐출구 단면에 설치된 메쉬 스크린을 이용하여 초음속 제트 소음 제어하기 위한 실험을 수행하였다. 메쉬 스크린은 미소 직경을 가진 스테인레스 철사들로 만들어졌으며 철망 형태이다. 노즐 압력비는 과팽창에서 부족팽창된 초음속 제트를 얻기 위해 다양하게 변화시켰다. 초기 제트 전단층을 교란하기 위해, 메쉬 스크린의 중앙 부분에 구멍을 만들었으며 그 구멍크기는 메쉬 스크린의 소음 저감효과를 조사하기 위해 변화시켰다. 유동장을 가시화하기 위해 쉴리렌 광학 장치를 사용하였고 OASPL과 소음 스펙트럼을 얻기 위해 음향을 측정하였다. 본 실험으로부터 얻어진 결과는 메쉬 스크린이 스크리치 톤을 상당히 억제하였으며, 메쉬 스크린의 구멍크기는 초음속 제트 소음을 저감하는 중요한 인자였다. 과팽창된 제트인 경우, 소음 저감효과는 적정팽창과 부족팽창된 제트에서의 저감효과보다 매우 크게 나타났다.

  • PDF

스마트 무인기 흡기구 설계 및 성능해석

  • 정용운;전용민;양수석
    • 항공우주기술
    • /
    • 제3권2호
    • /
    • pp.197-207
    • /
    • 2004
  • 현재 개발중인 스마트 무인기는 일반적인 헬리콥터와 같이 수직이착륙이 가능할 뿐만 아니라 고정익기와 같이 고속의 비행이 가능함을 목표로 하고 있다. 그러므로 흡기구는 여러 비행조건에서 엔진이 제 효율을 낼 수 있도록 충분한 공기를 흡입하루 수 있어야 함은 물론이고 비행체의 운행속도에 따라서도 그 효율이 어느 이상 저하되지 않도록 설계되어야 한다. 본 논문에서는 고속 비행체에 적합한 pitot 형태와 엔진 특성에 따른 플레넘 챔버를 장착한 흡기구를 설계하였다. 그리고 CFD-ACE를 이용하여 설계된 흡기구의 성능 해석을 수행하였으며 엔진 내부에서의 swirl과 distortion을 조사하고 압력손실에 대해서 연구하였다.

  • PDF

CFD를 이용한 풍향에 따른 스마트무인기 흡기구 성능 변화 예측 (Prediction of Performance Change for the Intake system of Smart UAV With Freestream Wind Direction Using CFD Analysis)

  • 정용운;전용민;양수석
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2004년도 추계 학술대회논문집
    • /
    • pp.95-99
    • /
    • 2004
  • The developing Smart UAV in KARI supposes high speed flight as like a conventional plane, as well as vertical takeoff and landing as like a helicopter. Therefore, the air intake system should be designed to provide the sufficient air flow to the engine and the maximum possible total pressure recovery at the engine intake screen over a wide range of flight conditions. For this purpose, we designed the intake system using a pilot type intake model and plenum chamber In this paper, we designed the intake model and analyzed the performance of designed intake system using the general-purpose commercial CFD code, CFD-ACE+ For 3-D calculation, we generated mesh using the unstructured gird and used $\kappa-\epsilon$ turbulence model. The analysis results of the total pressure variation and the velocity distribution was illustrated in this paper. The pressure recovery and distortion coefficient at a plane coincident with the compressor inlet were calculated and streamline variation through the intake system was investigated at the worst condition as well as the standard flight condition.

  • PDF

Atmospheric Turbulence Simulator for Adaptive Optics Evaluation on an Optical Test Bench

  • Lee, Jun Ho;Shin, Sunmy;Park, Gyu Nam;Rhee, Hyug-Gyo;Yang, Ho-Soon
    • Current Optics and Photonics
    • /
    • 제1권2호
    • /
    • pp.107-112
    • /
    • 2017
  • An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

천연기념물 제411호 경남 고성 덕명리 공룡화석 산지 일원 병풍바위의 형성에 관한 암석학적 연구 (A petrological study on the formation of geological heritage around Sangjogam County Park, Goseong, Gyeongsangnam-do)

  • 공달용;조형성;김재환;유영완;정승호;김태형;김종선;정종옥;김건기;권창우;손문
    • 헤리티지:역사와 과학
    • /
    • 제51권2호
    • /
    • pp.78-91
    • /
    • 2018
  • 경남 고성 상족암 일대는 화석, 연흔, 암맥, 주상절리 등 다양한 지질유산이 분포하고 있어 천연기념물 제411호(고성 덕명리 공룡과 새발자국 화석산지)로 지정되었다. 이 중 상족암의 주상절리는 해안에 인접하고 있어 아름다운 해안 경관을 이루고 있으며, 전체적인 형상은 거대한 병풍 모양을 연상케 하여 병풍바위라 불린다. 병풍바위에는 하위 퇴적층과의 경계면에 수직한 방향으로 주상절리가 특징적으로 발달하고 있다. 이번 연구에서는 병풍바위에 나타나는 주상절리를 대상으로 야외 및 현미경 관찰, 전암대자율 분석, X-선 회절 분석, 지화학 분석 등 암석 광물학적 연구와 대자율이방성(AMS) 분석을 통한 자기미세구조 연구를 수행하여 병풍바위와 주상절리의 형성과정에 대해 논의하였다. 병풍바위에 나타나는 산성 암상의 화학조성은 유문암의 조성을 가지며, 석영, 장석, 백운모, 견운모, 불투명광물 등이 관찰된다. 병풍바위에 대한 대자율이방성 분석 결과, 각 지점에서 입자들의 장 단축 방향을 나타내는 $k_1$$k_3$의 군집도가 매우 높게 나타나며, 납작한 형태의 엽리구조가 발달하고 있는데 이는 암맥, 용암류보다는 암상에서 발달하는 석리(rock fabric)로 해석된다. 결론적으로 병풍바위는 퇴적층의 층리면을 따라 관입한 암상이며, 주상절리는 관입한 유문암질 마그마의 냉각에 따른 수축에 의해 형성되었다. 이번 연구는 향후 국내에 분포하는 주상절리의 형성 메커니즘을 이해하는데 기초 자료로 활용할 수 있을 것이라 판단된다.