• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.90-95
• /
• 2011

We propose a super-thin and light-weight liquid crystal cell, in which glass substrates are eliminated and polarizers are used as substrates. We fabricate a polarizer substrate by depositing a-SiOX as a buffer layer, indium-tin-oxide as a transparent conducting layer, and a-SiOX as an alignment layer on a polarizer sequentially at a low temperature. We use the ion-beam method to align liquid crystals on polarizer substrates.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.305-310
• /
• 2004

We have studied the optimal phase retardation value of a homogeneously aligned liquid crystal (LC) driven by fringe-field when using the LC with positive dielectric anisotropy. In general, the transmittance of a homogeneous aligned LC cell under crossed polarizer is maximum when a twist angle of LC by in-plane rotation is 45$^{\circ}$ with polarizer and the cell retardation becomes λ/2. However, the device using the LC with positive dielectric anisotropy does not follow this since the degree of rotation of the LC is dependent on electrode position and in addition the LCs tilt up along the fringe-field. At the center of common and pixel electrode, the LC is most twisted around a middle position of a cell whereas at the edge position of pixel electrode, the LC is most twisted near bottom surface of a cell. Consequently, the optimal phase retardation of the device becomes much larger than λ/2 and the transmittance can be described using the combination of the in-plane switching and twisted nematic mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.479-482
• /
• 2004

We report a method for simultaneous measurements of cell gap, twist angle, birefringence dispersion of liquid crystal (LC) material and alignment directions in filled reflective LC cells. The method is based on spectral measurements of the LC cell reflectivity for three orientations ($0^{\circ},45^{\circ},90^{\circ}$) of the exit polarizer and may be applied for LC cells with low and high gaps.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.501-509
• /
• 2003

We have designed transflective liquid crystal display(LCD) associated with in-plane switching of a LC director driven by fringe-field, unlike other LCD mode. Reflective area consists of a λ/2 compensation film and a LC cell with retardation value(dΔn) of λ/4 with their optic axes making an angle of 15$^{\circ}$ and 75$^{\circ}$ against polarizer, respectively. In the transmissive area, top and bottom polarizers are parallel each other, an LC has a dΔn of λ/2, and another λ/2 compensation film is inserted between the LC cell and bottom polarizer. With the configuration, both devices show dark state initially. When an incident light is 550nm, the device shows wide-viewing-angle characteristics such that in the reflective area the contrast ratio target than 5 exists up to 55$^{\circ}$ of polar angle in all directions and in transmissive area it exists about 100$^{\circ}$ in vortical direction and 110$^{\circ}$ in horizontal direction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.530-535
• /
• 2004

We have studied 90$^{\circ}$ twisted nematic mode switching by fringe electric field(F-TN mode) using a liquid crystal (LC) with negative dielectric anisotropy. In the device, two polarizers are parallel each other, electrodes exist only on bottom substrate, and one of rubbing direction is coincident with polarizer axis. Therefore, the cell shows a black state before a voltage is applied. With a bias voltage generating fringe-electric field, the LC twists perpendicular to fringe electric field such that the LCs are almost homogeneously aligned except near the bottom surface since the negative type of the LC is used. Consequently, the new device exhibits much wider viewing angle than that of the conventional TN mode due to in-plane switching and relatively high transmittance since the LC director above whole electrode area aligns parallel to the polarizer axis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.983-987
• /
• 2004

We have studied electro-optic characteristics of reflective optically compensated splay (R-OCS) cell. The initial configuration of this cell is in splay form such that a mid director lies parallel to the substrate and around it hybrid structure is formed symmetrically so the optically compensation effect exists. Optimized optical configurations could be achieved by using a single polarizer, a quarter-wave film and a cell with quarter-wane retardation. The optimal cell retardation is 0.34 ${\mu}$m, allowing to have large cell gap. The cell provides high contrast ratio of 80:1 at normal direction and the region with contrast ratio over 5:1 covert up to 160$^{\circ}$ horizontally and vertically at all wavelength range.

• Journal of the Optical Society of Korea
• /
• v.9 no.4
• /
• pp.151-156
• /
• 2005

A spatial-domain Fourier Transform (FT) infrared (IR) spectrometer coupled with a PtSi Schottky­barrier IR detector plane was developed in the spectral range of $2.0-2.5{\mu}m$ for noninvasive measurement of analyte concentrations in cell culture media during cell culture processing. A key optical component of the spectrometer is a Savart plate which is a birefringent polarizer generating coherent two rays for interfering. The spectral resolution of the spectrometer was determined as $71cm^{-1}$ (${\~}0.05{\mu}m$ at $2.5{\mu}m$). Clear IR fringe patterns were imaged on the IR detector plane. The feasibility of the spectrometer for our application was investigated by measuring absorbance spectra of glucose and fetal bovine serum (FBS) which are important compounds in cell culture media. Experiment results show that the spectral quality of glucose and FBS was comparable with the standard spectra acquired with a commercial FT-IR spectrometer, presenting the feasibility of the spectrometer to perform analyte measurement in cell culture media.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.223-229
• /
• 1997

A source code is developed on the basis of Berreman's 4$\times$4 matrix formalism for the analysis of polarization transmission characteristics of twisted nematic liquid crystal display. By using the program, the polarization transmission characteristics of liquid crystal cells and polarizers are analyzed. For a normally white twisted nematic liquid crystal cell, we obtained a family of iso-contrast contours which helps to understand the viewing angle characteristics of the liquid crystal display device by using the cell. The program also help us to understand the variation of the degree of polarization as well as the deviation of the state of polarization of the light transmitted through the polarizer commonly used in the LCD according to the change in incidence angle. This result suggests the contrast of the images appearing on the LCD can be limited by the characteristics of the polarizer in addition to the liquid crystal cell.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.10
• /
• pp.908-913
• /
• 2003

We have performed computer simulation to obtain electro-optic characteristics of reflective hybrid aligned nematic liquid crystal displays (LCDs) driven by fringe field. The results show that the optimal retardation value (dΔn) of the cell is 0.289 ${\mu}$m, which allows for the cell to have a practical cell gap of larger than 3 ${\mu}$m when manufacturing. A reflectance of the dark state is only 0.114 % for an incident light 550 nm. At this condition, the light efficiency of white state reaches 92.7 %. The display with optimized cell parameters shows that the contrast ratio greater than 5 exists over 600 of polar angle in all directions and lower driving voltage than that of fringe-field driven homogeneously aligned reflective LCD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.597-599
• /
• 2009

We have developed new type of LCD Device which enables switching from reflective to tranmissive LCD mode and vice versa according to brightness of the surrounding. Alternation in these modes are possible by adding on circular polarized sheet and retardation film onto the bottom polarizer which allows the control of the back light and the LCD cell gamma voltage depending on the atmosphere. This method has been evaluated and confirmed by running on the LCD module device in which we have optimized retardation value by Poincare polarizer analysis.