• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1038-1043
• /
• 2002

The demand for multimedia service using Ka-band satellite communication are growing rapi이y. So, in this paper, we have analyzed rain attenuation with typical model, and proposed prediction model of rain attenuation in high frequency(over 20[GHz]). Path loss model by rain attenuation is based upon rain rate of representative region(6 cities). Proposed prediction model of rain attenuation and parameter of satellite link can be available for the Ka-band satellite communication.

• ETRI Journal
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2001

The performance of a long wavelength-band erbium-doped fiber amplifier (L-band EDFA) using 1530nm-band pumping has been studied. A 1530nm-band pump source is built using a tunable light source and two C-band EDFAs in cascaded configuration, which is able to deliver a maximum output power of 23dBm. Gain coefficient and noise figure (NF) of the L-band EDFA are measured for pump wavelengths between 1530nm and 1560nm. The gain coefficient with a 1545nm pump is more than twice as large as with a 1480nm pump. It indicates that the L-band EDFA consumes low power. The noise figure of 1530nm pump is 6.36dB at worst, which is 0.75dB higher than that of 1480nm pumped EDFA. The optimum pump wavelength range to obtain high gain and low NF in the 1530nm band appears to be between 1530nm and 1540nm. Gain spectra as a function of a pump wavelength have bandwidth of more than 10nm so that a broadband pump source can be used as 1530nm-band pump. The L-band EDFA is also tested for WDM signals. Flat Gain bandwidth is 32nm from 1571.5 to 1603.5nm within 1dB excursion at input signal of -10dBm/ch. These results demonstrate that 1530nm-band pump can be used as a new efficient pump source for L-band EDFAs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.213-217
• /
• 2012

In this paper, we design dual-band microstrip antenna for IEEE 802.16e mobile WiMAX standard IEEE 802.11 WLAN band at the same time. To solve interference at the desired operating frequency band, impedance matching is improved and simple production method showed the characteristics of the omni-directional and compact size. The proposed structure is considered to bring the effect of the installation costs, and show the antenna for dual-band communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.3 no.1
• /
• pp.35-39
• /
• 1978

Present system of maritime mobile communication is depend upon HF Band mostly. Due to the range of technical development activities for HF Band has reached to uppermost limit, it is going to be hard to meet the requirements of communication which would be increased in the future, by utilization of HF Band. Studying difficulties of realizing communication function and the uppermost limit of HF Band system, in order to seek more smooth communications under present system, I have been studying remedy of problems in using of HF Band system with examples of relay of free-charge telegrams for the group of an ocean-going vessels of our country, and analized and studied of future prospects of maritime mobile communication.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2212-2230
• /
• 2014

Cognitive radio (CR) users, known as secondary users (SUs), should avoid interference with primary users (PUs) who own the licensed band, while trying to access it; when the licensed band is unused by the PUs. To detect PUs, spectrum sensing should be performed over in-band channels that are currently in use by SUs. If PUs return to access the band, SUs need to vacate it, disrupting the SUs' communication unless a non-utilized band is discovered. Obtaining a non-utilized band in a short period facilitate seamless communication for SUs and avoid interference on PUs by vacating from the channel immediately. Searching for a non-utilized band can be done through proactive out-of-band (OB) sensing. In this paper, we suggest a proactive OB sensing scheme that minimizes the time required to discover a non-utilized spectrum in order to continue communication. Although, the duration spent on OB sensing reduces the throughput of the CR networks that can be achieved on band being utilized, the lost throughput can be compensated in the new discovered band. We demonstrate that, the effect of our proposed scheme on the throughput owing to OB sensing is insignificant, while exhibiting a very short channel discovery time.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.562-568
• /
• 2013

This paper presents a design of a wireless power transfer system based on magnetic resonant coupling technology with in-band wireless communication. To increase the transmission distance and compensate for the change in the effective capacitance due to the varying distance, the proposed system used a loop antenna with a selectable capacitor array. Because the increased transmission distance enables multiple charging, we added a communication protocol operated at the same frequency band to manage a network and control power circuits. In order to achieve the efficient bandwidth in both power transfer mode and communication mode, the S-parameters of the loop antennas are adjusted by switching a series resistor. Our test results showed that the loop antenna achieved a high Q factor in power transfer mode and enough passband in communication mode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.774-781
• /
• 2004

The HF band SSB communication of coast radio station had operated with principal axis of maritime communication until early in the 1990. But, that is changed with development of data communication and satellite technique, which have operated a few by rapidly decrement of user with accomplishment of the CMDSS. Recently, the radio system of HF band is expanded to globe maritime communication, which is support to maritime safety information and data traffic service by low charge with the SSB high speed modem. This study have proposed the digitalize method for maritime communication system using HF band in domestic.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.93-98
• /
• 2020

Research on underwater sensor networks is increasing due to such reasons as marine resource management, maritime disaster prediction and military protection. Many underwater sensor networks performs wireless communication using an acoustic sound wave band signal having a relatively low frequency. So the digital part of their modem can take charge of carrier band signal processing. To enable this, the sampling rate of the baseband band signal should be increased to a sampling rate at which carrier band signal processing is possible. In this paper, we designed a sampling rate increasing circuit based on a CIC interpolator for underwater sensor nodes. The CIC interpolator has a simple circuit structure. However, since the CIC interpolator has a large attenuation of the pass band and a wide transition band, an inverse sinc LPF is added to compensate for frequency response of the CIC interpolator. The proposed interpolator was verified in time domain and frequency domain using ModelSim and Matlab.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.116-122
• /
• 2004

The HF band communication of roast radio station had operated with principal axis of maritime communication until early in the 1990. But, that is changed with development of data communication and satellite technique, which have operated a few by rapidly decrement of user with accomplishment of the GMDSS. Recently, the radio system of 11u band is expanded to globe maritime communication, which is support to maritime safety information and data traffic service by low charge with the SSB high speed modem. This study have proposed the digitalize method for maritime communication system using HF band in domestic.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.61-68
• /
• 2023

Multi-band method which allocate the same data to different frequency bands, improves performance by compensating Doppler spreading and selective fading in underwater communications. The drawback of multi-band configuration may have worse performance because performance degradation in a particular band affects the output from the entire bands. It is very important to find which band is superior or inferior band in order to improve performance. Therefore this paper analyzes performance prediction algorithms of each band. This paper proposes three kinds of prediction methods. Through the ocean tests, this paper confirms utilizing the preamble error rates is most efficient algorithm among of them.