• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1473-1480
• /
• 1995

When the LMS algorithm is employed in the transversal filter structure, the computational complexity can be kept reasonably low. However, if the impulse response to be estimated is very long or signals involved are highly correlated like a speech the convergence speed becomes slow. The lattice filter is an excellent alternative to improve convergence speed since the lattice structure inherently has the orthogonal property among the backward prediction errors, but at the expense of the excessive computational load. If the input signal to be used can be sufficiently well modeled as a .RHO.-th order autoregressive(AR) process, the reflection coefficients after the .RHO.- th stage will be close to zero. Then, instead of employing the full lattice structure, the joint lattice filter structure can be implemented in conjunction with the transversal filter structure after the .RHO.-th stage. We propose, in this paper, this new lattice/transversal joint structure, and we will call it the reduced lattice filter. Using the reduced lattice filter, we are now able to achieve the performance as good as that of the lattice filter, while maintaining the complexity as low as that of the transversal filter. The proposed filter is particularly useful for an acoustic echo canceller due to the highly correlatedness nature of speeches and the long and frequently changing echo paths.

• 한국해양공학회지
• /
• 제19권1호
• /
• pp.20-25
• /
• 2005

The authors performed the underwater explosion analysis for the liquified oxygen tank - a kind of fuel tank of a mid-size submarine, and tried to verify the structural safety for this structure. First, the authors reviewed the theory and application of underwater explosion analysis, using a Structure-Fluid Interaction technique and its finite element modeling scheme. Next, the authors modeled the explosive and sea water as fluid elements, the LOX tank as structural elements, and the interface between the two regions as the ALE scheme. The effect on shock pressure and impulse of fluid mesh size and shape are also investigated. Upon analysis, it was found that the shock pressure due to explosion propagated into the water region, and hit the structure region. The plastic deformation and the equivalent stress were apparent at the web frame and the shock mount of LOX structure, but these values were acceptable for the design criteria.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1199-1204
• /
• 2004

Most overhead transmission lines in Korea run over the mountain; however, only little study has been made for the effect of mountain fire on polymeric insulator for transmission lines, though the study is significantly required, Therefore, in this study, the authors observed the deformation of the sheds of the insulator under fire, varying the ignition time using artificial ignition testing equipment, and investigated electrical and mechanical characteristics of the insulator through dry withstand voltage test, impulse flashover test and tensile load test. As the results of the tests, the following conclusions were obtained, First, when the insulator was subjected to the fire, the electrical characteristics were slightly reduced, but there was no change on the mechanical characteristics, Secondly, the sheds and sheath of the insulator were not non-flammable but less-flammable. These two results show the high mechanical stability and durability of the insulator under severe fire condition, though the electrical characteristics can be deteriorated as the time that the insulator is subjected to fire, goes by.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.117-122
• /
• 2012

액체로켓 엔진의 시동과 종료 시, 터빈에 가해지는 열충격을 완화시키기 위해 초음속 충동형 터빈로터의 일체형 슈라우드를 여러 조각으로 분할하는 방법을 고안하였다. 구조해석 수행결과 슈라우드 분할은 동익의 허브와 팁에 나타나는 소성변형량을 크게 줄일 수 있는 것으로 나타났다. 그러나 슈라우드 분할은 의도하지 않은 누설손실로 인해 성능손실이 불가피하며 이에 대한 정량적인 성능감소를 측정하기 위해 다양한 슈라우드 분할 형상에 대해 시험을 수행하였다. 연구대상 터빈의 경우 슈라우드 분할 수를 최대로 할 경우 설계점 효율은 2.65% 비율로 감소하는 것으로 나타났다.

• 한국안전학회지
• /
• 제38권2호
• /
• pp.44-51
• /
• 2023

With the recent increase in gas energy use, risk management for explosion accidents has been emphasized. Protective walls can be used to reduce damage from explosions. The KOSHA GUIDE D-65-2018 suggests the minimum thickness and height of protective walls, minimum reinforcement diameter, and maximum spacing of reinforcements for the structural safety of the protective walls. However, no related evidence has been presented. In this study, the blast load carrying capacity of the protective wall was analyzed by the pressure-impulse diagrams while changing the yield strength of the reinforcement, concrete compressive strength, reinforcement ratio, protective wall height, and thickness, to check the adequacy of the KOSHA GUIDE. Results show that failure may occur even with design based on the criteria presented by KOSHA GUIDE. In order to achieve structural safety of protective walls, additional criteria for minimum reinforcement yield strength and maximum height of protective wall are suggested for inclusion in KOSHA GUIDE. Moreover, the existing value for minimum reinforcement ratio and the thickness of the protective wall should be increased.

• 한국지반환경공학회 논문집
• /
• 제21권5호
• /
• pp.23-33
• /
• 2020

경제규모가 확장됨에 따라 급격히 증가한 폭발성 인화물질과 같은 위험물질 운송차량 사고로 터널과 같이 폐쇄적인 공간에서 피해사례가 증가하고 있다. 특히 도로터널의 경우, 장대화 추세와 도심부 환경를 보호측면에서 도심부 통과사례가 증가하고 터널통과 중 폭발과 같은 예상치 못한 극한 재난에 대한 구조물의 안전 확보는 매우 시급하다. 이와 같은 이유로 선진국에서는 이미 내폭에 대한 검토를 수행하고 있지만, 국내에서는 폭발 위험도에 대한 평가 및 대응책이 거의 전무하다. 따라서 본 연구에서는 도로터널의 폭발 안전성을 평가하기 위하여 도로를 운행하는 차량 가운데 폭발 하중이 가장 크다고 판단되는 비등액체팽창증기폭발(BLEVE)을 기준 폭발원으로 정하고, 폭발 시뮬레이션을 위해 등가TNT 폭발하중으로 전환하는 방법을 제시하였다. 또한, 도출된 폭발하중을 적용하여 터널에 대하여 다양한 변수를 가정하여 동적거동 시뮬레이션을 수행하여 터널의 폭발 안전성을 분석하였다.

• 한국전산구조공학회논문집
• /
• 제27권6호
• /
• pp.615-624
• /
• 2014

LNG 방열 시스템의 선형 동적해석 모델을 사용하여 슬로싱 충격 압력을 구조해석에 적용 시 사용되는 이상화된 삼각파 압력에 대해서 검토하였다. 삼각파 압력의 최대값, 지속시간, 비대칭성의 충격파에 대한 구조 안전성 평가를 위해서 멤브레인 구조의 허용기준과 슬로싱 압력에 관련된 간략화된 파괴압력에 대해 검토하고, 슬로싱 충격 압력의 지속시간과 비대칭성으로 특징 지워진 이상화된 삼각파 형상의 압력을 고려한 일련의 선형 동적해석을 수행하여 설계기준으로 사용할 파괴압력을 도출하였다. 본 논문에서 제시한 방법을 통해서 방열시스템 구조 요소의 안전성을 평가하기 위한 파괴 압력을 선정할 수 있고 모형실험을 통한 슬로싱 압력과의 비교를 통하여 방열시스템의 구조안전성을 평가할 수 있을 것이라 판단된다. 또한 해석결과를 통해 방열시스템에서의 최대 응력은 매우 짧은 순간의 충격하중 하에서는 압력의 비대칭성 보다는 하중 지속시간에 많은 영향을 받고 있음을 검토하였다.

• 한국항해항만학회지
• /
• 제34권4호
• /
• pp.271-279
• /
• 2010

The Mobile Harbor(MH) is a new transportation platform that can load and unload containers to and from very large container ships in the sea. This loading and unloading by crane can be performed with only very small movements of the MH in waves because MH is operated outside of the harbor. For this reason, an anti-rolling tank(ART) and an active mass driving system(AMD) were designed to reduce MH's roll motion, especially at the natural frequency of MH. In the conceptual design stage, it is difficult to confirm the design result of theses anti-rolling devices without modeling and simulation tools. Therefore, the coupled MH and anti-rolling devices' dynamic equations in waves were derived and a simulation program that can analyze the roll reduction performance in various conditions, such as sea state, wave direction, and so on, was developed. The coupled equations are constructed as an eight degrees of freedom (DOF) motion that consists of MH's six DOF dynamics and the ART's and AMD's control variables. In order to conveniently include the ART's and AMD's control dynamics in the time domain, MH's radiated wave force was described by an impulse response function derived by the damping coefficient obtained in the frequency domain, and wave exciting forces such as Froude-Krylov force and diffraction force and nonlinear buoyancy were calculated at every simulation time interval. Finally, the roll reduction performances of the designed anti-rolling devices were successfully assessed in the various loading and wave conditions by using a developed simulation program.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.34-40
• /
• 2015

Staged combustion cycle engines are well known to have high combustion efficiencies and specific impulse. In this study, design of mixing head part of combustion chamber for 8tonf class staged combustion cycle rocket engine (ES-08) was performed. Structural stability of the mixing head part of the combustion chamber is very important design factor because it is loaded by high temperature and high pressure of fuel and oxidizer as well as by thrust load simultaneously. Uniformity of flow distributions of the propellants to the injectors is also important factor. First, a basic configuration for the ES-08 mixing head part was designed on the basis of the structural design requirements. And then, the structural analyses were performed on the basic configuration as well as some of reinforced configurations. As the structural analyses results, the most stable configuration was selected for the ES-08 mixing head part. In order to examine the uniformity of the flow distributions of the propellants through the manifold of the mixing head, flow analysis was performed based on the selected configuration. The results of the flow analysis showed that the fuel and the oxidizer were uniformly supplied to the injector.

• 대한전자공학회논문지SP
• /
• 제48권2호
• /
• pp.24-31
• /
• 2011

동영상 잡음 제거에 있어서 비지역적 평균 기반 시공간 잡음 제거 알고리즘을 제안한다. 기존에 제시된 비지역적 평균 기반 알고리즘은 잡음 제거에 우수한 성능을 보이지만 연산량이 많고 여러 장의 장면 기억장치가 필요하기 때문에 하드웨어 시스템 구현에 많은 어려움이 있다. 그러므로 제안된 알고리즘에서는 무한 충격 응답 기반 시간 영역 잡음 제거 알고리즘을 도입하여 움직임이 적은 영역에서는 자연스러운 잡음 제거가 가능하며 움직임이 많은 영역에서는 연산량 측면에서 효율성을 고려하여 개선된 비지역적 평균 기반 잡음 제거 알고리즘을 적용하여 움직임에 의한 흐려짐을 최소화 하면서 잡음 제거를 수행하였다. 다양한 잡음 정도를 갖는 시험 영상에 대한 실험을 통해 수치적, 시각적 측면에서 각각 비교하여 제안된 알고리즘의 성능이 기존의 알고리즘과 대등하거나 촬영 영상에 따라서는 우수한 성능을 보임을 확인할 수 있었다.