• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.27-46
• /
• 1996

The purpose of this study was designed to compare with the effects of 4 different surface active bioceramics on the healing process of alveolar bone defects in dogs. Artificial alveolar bone defects depth 4-6mm, width 3-4mm) were created with # 6 round bur at interproximal areas of maxillary canine, maxillary 2nd premolar, mandibular canine, and mandibular 3rd premolar. porous hydroxyapatite(Interpore $200^R$) , 45S5 bioglass, CJ4/lOC crystalline glass, and JJ crystalline glass were implanted in intrabony defects randomly. Experimental groups were divided into 4 categories according to its implant material. After implantation, all groups were examined postoperatively 4 weeks to 12 weeks. 3 dogs was selected randomly and sacrificed after vascular perfusion with 2.5% glutaraldehyde at every 4 weeks. Tissue blocks with surroundig alveolar bone and soft tissues were removed and immersed in formaldehyde/glutaraldehyde fixative. After 20 weeks decalcification with EDTA and formic acid, sections were made and observed under light microscope and transmission electron microscope. In all experimental groups, the encapsulation of inactive connective tissue was observed around graft particles in 4 weeks. As time elapsed, the thickness of surrounding connective tissue was decreased. Osteoconductive bone growth pattern was seen apparently in all groups. CJ4/lOC crystalline glass showed the most active bone formation until 8 weeks. 45S5 bioglass was, however, the most active in new bone formation at 12 weeks. Though there was difference in resorption rate among grafting materials, the size of graft particles was decreased gradually. 45S5 bioglass was resorbed faster than the others. On the other hand, porous hydroxyapatite was degraded most slowly. Phagocytosed particulate matters was observed in the cytoplasm of multinuclear multinuclear giant cell and macrophage under transmission electron microscope. The results suggested suggested that 45S5 bioglass and CJ4/lOC crystalline glass may have some enhanced reparative potential when compared to porous hydroxapatite in the treatment of periodontal defeds. JJ crystalline glass reguires a further investigation of the safety of its use.

• Development and Reproduction
• /
• v.13 no.4
• /
• pp.297-303
• /
• 2009

Implantation of blastocyst into the uterine endometrium is established by the existence of histologically and functionally prepared uterine endometrium. Doc-1, an oral cancer suppressor gene, is expressed under the control of steroid hormones and has been suggested as a proliferation regulator of endometrial cells. However, the role is not much clear and in this study we examined the expression modulation of Doc-1 in decidualizing cells in vitro. In vitro decidualization was performed in endometrial stroma cells using progesterone and estrogen. Until 24 hr after decidual induction the proliferation of stroma cell was significantly increased but decreased after then. On the other hand, most of the cells differentiated into decidual cell after 48 hr of induction. The Doc-1 protein was co-localized in a specific deciudal cells and colocalization rate was increased in a parallel manner with the induction time. Based on these results, it is suggested that Doc-1 expression is under the control of both steroid hormones and decidual signals, and Doc-1 protein is involved in suppression of the proliferation of decidualizing cells.

• Journal of Periodontal and Implant Science
• /
• v.38 no.2
• /
• pp.163-170
• /
• 2008

Purpose: Biphasic calcium phosphates have been of great interest recently. Mixing adequate ratios of hydroxyapatite(HA) and beta-tricalcium phosphate($\beta$-TCP) allowed to control the resorption rate without distorting its osteoconductive property. This study evaluated the bone formation effect of newly developed biphasic calcium phosphate(BCP) in calvarial defect of rabbits. Materials and Methods: 6 male New Zealand rabbits were used. Four defects with 8mm in diameter were created on each animal. BCP with HA/$\beta$-TCP ratio of 7:3 and particle size of $0.5{\sim}1.0\;mm$ was used as the test group and bovine bone with $0.25{\sim}1.0\;mm$ particle size, as the control group. Both test and control group materials were randomly implanted in the calvarial defects and were covered witha polymer membrane. The animals were sacrificed after 12, 24, and 48 weeks of implantation under general euthanasia. Resin blocks were obtained and were stained by masson's trichrome for histological observation. Results: Overall results were uneventful without any defect exposure or inflammation. The amount of new bone formation and bone maturity increased with increase in healing period at both groups. New bone in test group was mostly formed along the material particle surrounded by osteoblasts, and observation of osteoblastic stream was also present. Bone maturity increased as it was closer to thedefect margins. Under the same healing period, the test group showed more bone formation than the control group with more stable bovine bone particles remaining even after 48 weeks, whereas considerable resorption took place in BCP. Almost total defect closure was observed in test group with new bone formation in the central part of the defect. However, limited new bone formation was observed in the control group. Conclusion: Within the limits of the study, the present study reveals the newly developed BCP to be a good osteoconductive material. However, further studies are needed to be conducted in a different study model with a larger sample size.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.149-161
• /
• 2004

The fusion of nano technology and information technology is essential to sustain the present growth rate and to induce new industry in this ever-growing information age. Considering Korean industry whose competitiveness lies heavily on information related technologies, this field will be inevitable for future. Nano materials can be described as novel materials whose size of elemental structure has been engineered at the nanometer scale. Materials in the nanometer size range exhibit fundamentally new behavior, as their size falls below the critical length scale associated with any given property. " Bottom-up' techniques involve manipulating individual atoms and molecules. Bottom-up process usually implies controlled or directed self assembly of atoms and molecules into nano structures. It resembles more closely the processes of biology and chemistry, where atoms and molecules come together to create structures such as crystals or living cells. Nano scale sensors are included in the electronics area since the diverse sensing mechanisms are often housed on a semiconductor substrate and usually give rise to an electronic signal. The application of nano technology to the chemical sensors should allow improvements in functionality such as gas sensing. In this presentation, we will discuss about the nano scale information materials and devices fabricated by using the organic/inorganic nano templates.

• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.173-182
• /
• 2002

The mechanisms underlying of the visual assessment and resulting in optimum embryonic development following in vitro maturation, fertilization, and culture are unclear, It was known that in vitro produced embryos show more frequent occurrence of fragmentation, which resulted in poor developmental potential and decreased implantation rate. The objective of this study was to investigate the apoptotic rates in bovine blastocyst derived from in vitro fertilization (IVF) and nuclear transfer (NT). In addition, the expression levels of Bcl-2 and Bax gene were investigated in the blastocyst to confirm their potential roles in the regulation of apoptosis during preimplantation embryonic development. Analysis of apoptosis was carried out by using terminal deoxynucleotidyl transferase mediate dUTP nick end labeling (TUNEL) method. The levels of Bcl-2 and Bax gene in the blastocyst derived from IVF and NT were determined by RT-PCR. The proportion of TUNEL positive signal in blastocyst derived from NT was significantly higher than that in blastocyst derived from IVF (p<0.001). Bcl-2 expression level of blastocyst derived from IVF was higher than that of blstocyst derived from NT. However, high expression level of Bax was observed in the blastocyst derived from NT. These results indicates that apoptosis is more responsible for fiagmentation in bovine blastocyst derived from NT than IVF. These results suggested that the increase of developmental failure followed by NT could be caused by nuclear fragmentation as apoptosis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.31-35
• /
• 2003

폴리카보네이트는 내열성과 투명성이 우수한데 비해 내후성이 좋지 않아 황변 및 물성이 저하되고, 내찰상성이 약하여 긁히기 쉬운데다 이물질에 의해 오염되기 쉬워 투명성이 저하되는 문제점이 있다. 이러한 단점을 극복하고, 사용하는 용도에 따라 요구되는 다양한 기능성을 부여하기 위하여 폴리카보네이트 표면에 기능성층을 형성시킴으로써 그 목적을 달성하고자 한다. 본 논문에서는 이온 주입기술을 이용하여, 폴리카보네이트 표면의 전기전도도 특성을 향상시키고, 피부암 및 백내장 등을 유발하는 유해한 자외선 (UV-A, UV-B)을 차단하려 한다. 표면전기전도도의 향상은 이물질로부터 오염되는 정도를 낮추며, 정전기를 방지할 수 있다. PC(Polycarbonate) 표면에 $N^+,\;Ar^+,\;Kr^+,\;Xe^+$ 이온을 에너지 20keV에서 50keV을 사용하여, 주입량 $5{\times}10^{15}\;{\sim}\7{\times}10^{16}\cm^2$ 로 조사하였다. 이온 주입된 PC의 표면을 두 접점 방법의 표면 저항 측정으로 표면전기전도도 특성을 알아보았고, 자외선차단 특성은 UV-Vis 로 분석하였다. 이들 전기적 광학적 특성간의 상관관계를 관찰하고, 이러한 특성을 나타내는 화학적 기능그룹들의 변화를 보기 위해 FTIR 분석법으로 관찰하였다. 이온조사량의 증가에 따라 표면저항은 $10^7{\Omega}/sq$까지 감소하여 표면전기특성을 증가시키며, 자외선 차단 특성은 UV-A를 95%까지 차단하여 인체에 유해한 자외선 차단에 유용함을 확인하였다. 이러한 특성은 PC 표면에 카본 네트워크 형성과 $\pi$전자들의 운동량을 증가시키는 구조로 고분자 사슬들의 결합구조 변형에 의한 것으로 생각된다.블을 가지고 파서를 설계하였다. 파서의 출력으로 AST가 생성되면 번역기는 AST를 탐색하면서 의미적으로 동등한 MSIL 코드를 생성하도록 시스템을 컴파일러 기법을 이용하여 모듈별로 구성하였다.적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.2
• /
• pp.261-265
• /
• 1997

The objective of this study was to examine the effect of EGF to the in vivo development of mouse IVF/IVC embryo. The 2-cell embryos were cultured in medium (5-6 embryos/25 ${\mu}l$/drop) w/wo EGF (10 ng/ml) and day 4 blastocysts recovered from each treatment group were transferred into the uteri of recipients of pseudopregnant day 3. The results obtained in this experiment were summarized as follows: 1. When the effect of EGF to the in vitro development and cell number of blastocysts produced from the culture of 2-cell embryos in w/wo EGF was determined, those results of EGF treatment group showed not significant difference compared with control. 2. However, when the effect of EGF to the in vivo development of blastocysts recovered from each treatment group was examined, production of the normal fetus against transferred embryos in EGF treatment group (51.2%) was very higher than that in control group (31.1%), although total implantation was not significantly different between treatment group (control: 64.4%, EGF: 69.8%). Therefore, this result suggested that EGF can affect to the in vivo development of IVF/IVC embryos through the improvement of embryo quality, although EGF treated embryos showed not significant development rate compared with control.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.3
• /
• pp.175-182
• /
• 2021

Objectives: In this prospective randomized controlled trial, we measured the primary and secondary stability of two surface-treated implants placed in the posterior maxilla, applied 3-month loading protocols, and compared and analyzed the short-term outcomes of the implants. Patients and Methods: From June 2018 to June 2019, patients with a residual bone height of 4 mm in the posterior maxilla were enrolled and randomly divided into two groups to place SA implants (Osstem Implants, Korea) in Group A and NH implants (Hiossen, USA) in Group B. Finally, 14 implants placed in 13 patients in Group A and 17 implants placed in 14 patients in Group B were analyzed. The measured primary and secondary stability of each implant was represented by implant stability quotient (ISQ), and treatment outcomes were evaluated. Results: Group A consisted of patients with an average age of 62.2 years (range, 48-80 years), and Group B consisted of patients with an average age of 58.1 years (range, 35-82 years). Primary stability was 73.86±6.40 and 71.24±5.32 in Groups A and B, respectively (P=0.222). Secondary stability was 79.07±5.21 in Group A and 78.29±4.74 in Group B (P=0.667). A steep increase in ISQ during the healing period was observed in Group B, though it was not significant (P=0.265). The mean follow-up period was 378.5±164.6 days in Group A and 385.3±167.9 days in Group B. All implants in each group met the success criteria, and the success rate was 100%. Conclusion: Two surface-treated implants placed in the posterior maxilla with greater than 4 mm alveolar bone height exhibited successful one-year treatment outcomes if a primary stability of 65 or higher ISQ was obtained and a 3-month early loading protocol was applied.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.127-134
• /
• 2022

Among many contributing factors of implant failure, excessive loading and inflammation contribute mainly to increasing implant failure rate. Especially, poor oral hygiene around implants is one of the most common reasons for implant failure. When implant prosthesis fails to function, the clinician should re-diagnose and plan treatment using the remaining implants. Additional implantation may be needed to make a new type of prosthesis or either implant-assisted RPD and implant overdenture treatment may be performed using the remaining implants. In this article, a patient whose fixed implant prosthesis in the maxilla had failed of poor oral hygiene maintenance was reported to be recovered with removable implant overdenture by using remaining implant abutments and a milled bar with additional retentive elements. Through this treatment, the clinical results were satisfactory in terms of esthetics, masticatory function recovery and oral hygiene management.

• Development and Reproduction
• /
• v.2 no.2
• /
• pp.179-187
• /
• 1998

The effects of prostaglandins in hatching and implantation have been studied but the results were various, and those are not well known by the embryonic stage. The present study examined the effects of prostaglandin $E_2$(PG $E_2$) and prostaglandin $F_2$$_{\alpha}$ (PG $F_2$$_{\alpha}$) on the expansion and hatching of mouse embryos by embryonic stage. Also we tried to measure the concentration of prostaglandins of morula, expanded, and hatching embryos. In early morula stage embryos, high concentration of PG $E_2$(>100$\mu$M) showed cytotoxicity but PG $F_2$$_{\alpha}$ did not. The hatching was inhibited all groups but not gave negative effects on expansion. In 84 hr and 96 hr stage embryos, the hatching rate was decreased at all treatment groups but not inhibited the expansion. When combine prostaglandin with indomethacin, the hatching rate was increased significantly compared to the prostaglandin-treated groups, and as lower and lower the PG $E_2$ concentration, the hatching rate increased to the control level. The embryonic synthesis of PG $E_2$ increased dramatically but that of PG $F_2$$_{\alpha}$ increased gradually. PG $E_2$ showed cytotoxicity at early stage embryos much than late stage embryos, but PG $F_2$$_{\alpha}$ did not. Hatching was inhibited by the high PG $F_2$$_{\alpha}$ concentration. It is suggested that the inhibition of hatching might be at resulted from cytotoxicity of PG $E_2$ on embryo. However, it is thought that the mechanisms of inhibition of hatching are different between PG $E_2$ and PG $F_2$$_{\alpha}$. In conclusion, it can be suggested that PG $E_2$ and PG $F_2$$_{\alpha}$ concerned with the expansion and hatching, and their effects on hatching were different by the embryonic stage.$/ concerned with the expansion and hatching, and their effects on hatching were different by the embryonic stage.