• Journal of Korean Society of Rural Planning
• /
• v.28 no.4
• /
• pp.19-29
• /
• 2022

This study aimed to estimate the impervious area rate by rural water districts in 2009 and 2021 and analyze the changes. From the EGIS(Environmental Geographic Information Service) land cover maps, the impervious areas were defined as residential, commercial, industrial, culture·sports·recreational, traffic, public facilities, and greenhouses of land cover classes. For 496 rural water districts excluding the border area with North Korea, the nationwide impervious area rate increased from 5.96% in 2009 to 7.50% in 2021. The average of the top 50 rural water districts increased from 23.4% in 2009 to 27.1% in 2021. E ven for the bottom 50 rural water districts, the average impervious area rate rose from 1.12% in 2009 to 1.40% in 2021. Rural water districts with a high impervious area rate are mainly distributed in metro cities and industrial areas. The contraries are primarily found in Gangwon, Gyeongsang, and Jeolla regions covered with forests and farmlands. Notably, the impervious area rate changed more in the neighboring rural water districts than in large cities, and the rate kept increasing slightly even in rural areas with a low impervious area rate. The findings of this study will help prepare a reasonable alternative for managing the impermeable surface of rural areas for safe and sound rural water cycle.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.117-125
• /
• 2023

This study aimed to analyze the recent status and changes in impervious surface areas and their ratios across regions in Gyeongsangnam-do, providing fundamental data for regional development and impervious surface management. Based on the 'Guidelines for Calculating Water Cycle Management Indicators for Nonpoint Pollution Source Control(Ministry of Environment)', we processed the land characteristics survey map(shapefile) from 2018 and 2022 to analyze impervious surface area and their rates by administrative boundaries. The impervious surface area in Gyeongsangnam-do increased from 75,652 ha in 2018 to 81,055 ha in 2022, with the rate rising by 0.51% from 7.18% to 7.69%. The average of impervious surface area across 545 eupmyeon units expanded by approximately 9 ha, from 139.8 ha in 2018 to 148.8 ha in 2022, with the rate increasing by 0.71%. Concurrently, the whole population declined by 2.8% while the number of households surged by 6.4%, correlating with the growth in impervious areas. Despite population decreases, factors such as population migration, increased household fragmentation, new residential developments, and industrial facility expansions have consistently contributed to the rise in impervious surface area. Notably, even in areas with high impervious surface area rate, significant disparities existed between urbanized areas and predominantly rural regions. Furthermore, about 333 units(61% of the whole eupmyeons), showed negligible changes in their impervious surface area rate, with an increase of less than 0.5%.

• Journal of Environmental Impact Assessment
• /
• v.17 no.5
• /
• pp.289-297
• /
• 2008

An impervious cover is one of most important factors which effect on a water body environment in a watershed. There are many researches on the impact of an impervious cover on water quality, quantity and ecosystem and most of these researches have been focused on an impervious rate or area in a watershed without considering structure features as like shape, edge, connection of impervious cover. In this study, we focused on a landscape structure which includes shape, density, contiguity, distance, aggregation of land cover type as well as area and rate. The calculation of a landscape indices made to analyse a landscape structure is conducted by applying Fragastats 3.3 program. Osan-cheon watershed where has rapidly urbanized is selected as a study field. Land information for 2002 and 2007 is from land classification maps provided by Ministry of Environment. The result shows that the increasing rate of an impervious cover is more conspicious in Kiheung dam watershed but the fragment of impervious cover areas is shown remarkably in the Osan sub-watershed. The trend of aggregation and connection of impervious covers is increasing. But it was very difficult to say that which type of landscape structure is more beneficial for a watershed management. The implication of this study is to find the need to come over the conventional ways to evaluate landscape structure of a watershed such as rates and areas of impervious cover, and define the importance of landscape feature as like connection, distance, edge density, fragment of impervious covers.

• Journal of Environmental Policy
• /
• v.7 no.3
• /
• pp.121-140
• /
• 2008

The impervious cover ratio has been used as an important measure for tracing water environment characteristics in watershed. Impervious cover is divided into total impervious cover and effective impervious cover, and its size varies depending on the land use characteristics of a watershed. Total impervious cover can be easily measured using existing land use maps or land cover map, while it takes a considerable amount of time and labor to measure the effective impervious cover, as water flow should be identified at each site. This study is intended to calculate the total impervious cover and effective cover of a sample site, compare their characteristics, and find a method to apply effective and total impervious cover ratios toward watershed management. The analysis of the sample site showed that the effective impervious cover rate(39.7%) was less than the total impervious cover rate(43%). This suggests that it would be acceptable, in terms of time and cost, if total impervious cover is applied as the representative impervious cover ratio of a watershed considering that it was used as basic data to analyze the effect that impervious cover has on the water environment.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.55-67
• /
• 2023

This study investigated the correlation between impervious surface area rate(ISAR) and various urbanization indicators at the si-gun administrative level. For the years 2017 and 2021, we built correlation matrices to examine the relationships between ISAR and eight urbanization indicators, including total population, working-age population, residential power consumption, non-agricultural power consumption, paved road length, permitted development area, numbers of registered vehicles, and cadastral 'Dae' parcel area. Additionally, K-means clustering was employed to classify the 229 si-guns based on the ISAR change patterns. The analysis revealed a significant positive correlation between ISAR and urbanization indicators for both years studied. However, the interannual comparison showed a noticeably weaker correlation between changes in ISAR and urbanization indicators from 2017 to 2021. The K-means analysis also showed that si-guns with higher ISAR values, typically urban areas, demonstrated a weaker correlation, while the cluster consisting mostly of rural areas with lower ISAR displayed stronger correlations. These results suggested that ISAR should be a significant factor for consideration in sustainable rural planning and development strategies.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.643-653
• /
• 2013

In this study, trend analysis was performed by various runoff analysis method of Non-point Pollution Source(NPS) at the impervious area. The characteristics of rainfall at impervious area appeared to be influenced by rainfall strength and it appeared that first flush phenomenon occurs often if rainfall strength acts largely. It is judged that the measure is required to be prepared against that now that concentration difference of non-point pollution source appeared to be big by precedent number of days of no rainfall. As the result of calculating Decrease Rate (DR) by first flush of non-point pollution source, it is judged that it is important to prepare the measure against the pollutants about initial rain and it is necessary to calculate the capacity of non-point pollution source processing facilities regarding that now that the non-point pollution source integrated at impervious area showed the characteristics that are flowed out in high concentration by initial rain in case of non-rainfall considering the characteristics of non-point pollution source at impervious area. When taking 50% of non-point pollution source as the standard for decrease rate that was evaluated previously, it appeared as 15~60 min in case of TSS and it appeared as 30~90 min in case of organic compound, but the characteristic whose decrease rate is below 50% also appeared even till rainfall-runoff ends. Based on that, it is judged that it could be used as the reference when designing the structural BMPs facilities later.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.529-536
• /
• 2007

As the Imperious surface is an important index for the estimation of urbanization and environmental change, the increase of impervious surfaces causes meteorological and hydrological changes like urban climate change, urban flood discharge increasing, urban flood frequency increasing, and urban flood modelling during the rainy season. In this study, the estimation of impervious surfaces is performed by using Landsat-7 ETM+ image in An-sung area. The construction of sampling data and checking data is used by IKONOS image. It transform to a tasselled cap and NDVI through the reflexibility rate of Landsat ETM+ image and analyze various variables that influence on impervious surface. Finally, the impervious surfaces map is accomplished by regression tree algorithm.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.199-217
• /
• 2016

Influences of seasonal warming and cooling rates on the annual temperature patterns were analyzed based on the meteorological data from 13 weather stations in Busan Metropolitan Area(BMA), Korea during 1997~2014. BMA daily temperature time-series was generalized by Fourier analysis, which mathematically summarizes complex, regularly sampled periodic records, such as air temperature, into a limited number of major wave components. Local monthly warming and cooling rates of BMA were strongly governed by the ocean effect within the city. March($1.121^{\circ}C/month$) and November(-$1.564^{\circ}C/month$) were the two months, when the most rapid warming and cooling rates were observed, respectively during the study period. Geographically, spring warming rates of inland increased more rapidly compared to coastal areas due to weaker ocean effect. As a result, the annual maximum temperature was reached earlier in a location, where the annual temperature range was larger, and therefore its July mean temperature and continentality were higher. Interannual analyses based on average temperature data of all weather stations also showed that the annual maximum temperature tended to occur earlier as the city's July mean temperature increased. Percent area of impervious surfaces, an indicator of urbanization, was another contributor to temperature change rates of the city. Annual mean temperature was positively correlated with percent area of impervious surfaces, and the variations of monthly warming and cooling rates also increased with percent area of impervious surfaces.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.218-218
• /
• 2017

Urbanization increases impervious area and decreases the water quantity infiltrating into soil layers. This leads to lack of ground water, it could be possibly problematic for agricultural water for crop growth in lower basins, reducing not only ground water but also streamflow quantities. One such approach to minimize the impact of urbanization is to apply low impact developments (LIDs). LIDs are to decrease the percentage of impervious area so that infiltration rate is increased, there is a need to simulate the LIDs prior to the construction. LIDs in Storm Water Management Model (SWMM) are limited to be seven types, however it is often required to simulate LIDs more than seven types. Therefore an approach to apply eleven LIDs is provided in the study, updating the model parameters. A scenario containing eleven LIDs was given by the environmental decision makers, the effect of LIDs were simulated with the expected annual costs considering establishment and maintenance costs.

• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.717-727
• /
• 2011

Impervious surface affects urban climate, flood, and water pollution and has important role as basic data for urban planning and environmental and resources management uses. With a high paved rate, increased quantity of the outflown water and brings urban flooding during a heavy rain. Moreover, these non-point source pollution is getting increased the water pollution. In this regard, it is definitely important to research and keep monitoring the current situation of paved surface, which influences urban ecosystem, disaster and pollution. In this study, we suggest a method to utilize high resolution satellite image data for efficient survey on the current condition of paved surface. We analysed the paved surface condition of Dae-jeon metropolitan city area using KOMPSAT-2 image and validate its practicalness and limitation of this method.