• Smart Structures and Systems
• /
• 제8권3호
• /
• pp.303-320
• /
• 2011

Comparing to active damage monitoring, impact localization on composite by using time reversal focusing method has several difficulties. First, the transfer function of the actuator-sensor path is difficult to be obtained because of the limitation that no impact experiment is permitted to perform on the real structure and the difficulty to model it because the performance of real aircraft composite is much more complicated comparing to metal structure. Second, the position of impact is unknown and can not be controlled as the excitation signal used in the active monitoring. This makes it not applicable to compare the difference between the excitation and the focused signal. Another difficulty is that impact signal is frequency broadband, giving rise to the difficulty to process virtual synthesis because of the highly dispersion nature of frequency broadband Lamb wave in plate-like structure. Aiming at developing a practical method for on-line localization of impact on aircraft composite structure which can take advantage of time reversal focusing and does not rely on the transfer function, a PZT sensor array based phase synthesis time reversal impact imaging method is proposed. The complex Shannon wavelet transform is presented to extract the frequency narrow-band signals from the impact responded signals of PZT sensors. A phase synthesis process of the frequency narrow-band signals is implemented to search the time reversal focusing position on the structure which represents the impact position. Evaluation experiments on a carbon fiber composite structure show that the proposed method realizes the impact imaging and localization with an error less than 1.5 cm. Discussion of the influence of velocity errors and measurement noise is also given in detail.

• 비파괴검사학회지
• /
• 제32권6호
• /
• pp.703-710
• /
• 2012

A structural health monitoring technique for locating impact position in a composite plate is presented in this paper. The method employs a single sensor and spatial focusing properties of time reversal(TR) and inverse filtering(IF). We first examine the spatial focusing efficiency of both approaches at the impact position and its surroundings through impact experiments. The imaging results of impact localization show that the impact location can be accurately estimated in any position of the plate. Compared to existing techniques for locating impact or acoustic emission source, the proposed method has the benefits of using a single sensor and not requiring knowledge of anisotropic material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in other ultrasonic testing of plate-like structures.

• Korean Journal of Radiology
• /
• 제21권10호
• /
• pp.1115-1125
• /
• 2020

Combined hepatocellular-cholangiocarcinoma (cHCC-CCA) is a primary liver cancer (PLC) with both hepatocytic and cholangiocytic phenotypes. Recently, the World Health Organization (WHO) updated its histological classification system for cHCC-CCA. Compared to the previous WHO histological classification system, the new version no longer recognizes subtypes of cHCC-CCA with stem cell features. Furthermore, some of these cHCC-CCA subtypes with stem cell features have been recategorized as either hepatocellular carcinomas (HCCs) or intrahepatic cholangiocarcinomas (ICCs). Additionally, distinctive diagnostic terms for intermediate cell carcinomas and cholangiolocarcinomas (previous cholangiolocellular carcinoma subtype) are now recommended. It is important for radiologists to understand these changes because of its potential impact on the imaging-based diagnosis of HCC, particularly because cHCC-CCAs frequently manifest as HCC mimickers, ICC mimickers, or as indeterminate on imaging studies. Therefore, in this review, we introduce the 2019 WHO classification system for cHCC-CCA, illustrate important imaging features characteristic of its subtypes, discuss the impact on imaging-based diagnosis of HCC, and address other important considerations.

• International Journal of Safety
• /
• 제7권2호
• /
• pp.17-22
• /
• 2008

Recent developments in contactless, air-coupled sensing of seismic and ultrasonic waves in concrete structures are presented. Contactless sensing allows for rapid, efficient and consistent data collection over a large volume of material. Two inspection applications are discussed: air-coupled impact-echo scanning of concrete structures using seismically generated waves, and air-coupled imaging of internal damages in concrete using ultrasonic tomography. The first application aims to locate and characterize shallow delamination defects within concrete bridge decks. Impact-echo method is applied to scan defected concrete slabs using air coupled sensors. Next, efforts to apply air-coupled ultrasonic tomography to concrete damage imaging are discussed. Preliminary results are presented for air-coupled ultrasonic tomography applied to solid elements to locate internal defects. The results demonstrate that, with continued development, air-coupled ultrasonic tomography may provide improved evaluation of unseen material defects within structures.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1266-1276
• /
• 2021

The mask parameters of a coded aperture are critical design features when optimizing the performance of a gamma-ray camera. In this paper, experiments and Monte Carlo simulations were performed to derive the minimum detectable activity (MDA) when one seeks a real-time imaging capability. First, the impact of the thickness of the modified uniformly redundant array (MURA) mask on the image quality is quantified, and the imaging of point, line, and surface radiation sources is demonstrated using both cross-correlation (CC) and maximum likelihood expectation maximization (MLEM) methods. Second, the minimum detectable activity is also derived for real-time imaging by altering the factors used in the image quality assessment, consisting of the peak-to-noise ratio (PSNR), the normalized mean square error (NMSE), the spatial resolution (full width at half maximum; FWHM), and the structural similarity (SSIM), all evaluated as a function of energy and mask thickness. Sufficiently sharp images were reconstructed when the mask thickness was approximately 2 cm for a source energy between 30 keV and 1.5 MeV and the minimum detectable activity for real-time imaging was 23.7 MBq at 1 m distance for a 1 s collection time.

• Imaging Science in Dentistry
• /
• 제49권2호
• /
• pp.153-158
• /
• 2019

Purpose: The purpose of this study was to investigate variations in velar shape according to age, sex, and race using magnetic resonance imaging (MRI). Materials and Methods: The study sample consisted of 170 participants (85 children, 85 adults) between 4 and 34 years of age. Velar morphology was visually classified using midsagittal MRI scans for each participant by 2 independent raters. Inter- and intra-rater reliability was assessed. Statistical analyses were performed to identify correlations of velar shape with sex, age, and race. Results: The most frequent velar shape was "butt" for both adults(41%) and children (58%) in this study. The least common shapes for adults were "leaf" and "S." The children did not exhibit any "leaf" or "straight" velar shapes. A statistically significant difference was noted for age with respect to velar shape (P=0.014). Sex and race were found to have no significant impact on velar shape in this study. Conclusion: When using MRI to evaluate velar morphology, the "butt" shape was most common in both children and adults. Velar shape varied significantly with age, while race and sex did not have a significant impact.

• Journal of Cardiovascular Imaging
• /
• 제26권4호
• /
• pp.226-228
• /
• 2018

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권9호
• /
• pp.4757-4761
• /
• 2012

Objectives: To explore the impact of low- vs conventional-dose chemotherapy via transcatheter arterial chemo-embolization (TACE) on serum fibrosis indicators and treatment efficacy of hepatocellular cancer patients (HCC). Materials and Methods: Patients fulfilling the eligibility criteria were assigned to TACE in Group A (with low-dose chemotherapy) or Group B (conventional-dose chemotherapy). Four serum fibrosis related indicators, hyaluronic acid(HA), human pro-collagen type-III (hPC-III), laminin (LN), and collagen type-IV(IV-C) before TACE were compared with the values 7 days after TACE. The response rate and survival time were also compared between the two groups. Results: Fifty patients with HCC were enrolled in this study, including 25 in Group A and 25 in Group B. No significant differences were detected between the two groups in the four indicators before TACE. After TACE, the value of the four serum indicators increased significantly in Group B. However, no significant differences regarding these four indicators were found in Group A after TACE. Significant differences were demonstrated between the two groups after TACE, but median survival time and 1 or 2 year overall survival rates did not differ (P>0.05). Conclusions: Low-, compared with conventional-dose chemotherapy exerts the same impact on the variation of fibrosis related indicators and has no influence on median survival time and survival rate after TACE in HCC patients.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.47-55
• /
• 2012

본 논문에서는 단일 센서와 시간역전 원리를 이용하여 간단한 판에서 충격 위치를 결정할 수 있는 탐상법을 다루었다. 수치적인 시뮬레이션과 실험을 통하여 시간역전에 의한 충격위치와 그 주변에서 신호의 집속효과를 관찰하고, 충격위치 결정에 영향을 미칠 수 있는 인자들(가진력의 크기, 신호의 기록시간)에 대해 살펴보았다. 이러한 결과를 기초로 두 가지 다른 충격위치에 대한 실험을 수행하고 그 결과를 가시화하였으며, 실제 충격위치를 정확하게 결정할 수 있음을 확인하였다. 여기서 제안한 방법의 특징은 단일센서를 사용하는 것과 시험체의 형상과 물성을 몰라도 된다는 점이다. 또한 판에서와 같이 분산성의 다중모드 파동이 발생하는 경우에도 특정 모드나 주파수에 의존할 필요가 없다. 따라서 기존의 충격위치 결정법에 비해 많은 장점을 지니고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.715-722
• /
• 2012

A structural health monitoring (SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal (TR) and inverse filtering (IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.