• 대한토목학회논문집
• /
• 제37권3호
• /
• pp.585-592
• /
• 2017

도심 내 매설된 대다수의 하수관로는 노후가 심각하게 진행되어 파손의 가능성이 높다. 또한, 도시개발의 집중도가 높아 인구밀도나 통행량이 많으므로 하수관로가 붕괴되면 사회 경제적으로 막대한 피해를 입게 된다. 따라서 관로 파손에 의한 사고를 예방하기 위해 사전적인 유지관리가 필요하며, 한정된 재원의 효율적인 활용을 위해 파손의 가능성과 피해의 규모를 동시에 고려한 위험도 기반의 우선순위 결정방안이 제시되어야 한다. 본 연구에서는, 다양한 해외 연구사례를 검토하여 위험도 기반의 하수관로의 조사 우선순위 결정 방법을 도출하였고 도심지 배수분구에 적용 검토하였다. 우선, 서울시 하수관로 GIS DB를 통해 확보 가능한 영향인자를 도출하고, 각 영향인자들의 가중치, 구분항목, 영향점수를 결정하여 가중치 환산법으로 하수관로 파손결과를 산정하였다. 또한, 하수관로의 예상 내용연수 대비 사용연수를 계산하여 파손가능성을 도출하였으며, 내츄럴 브레이크 방법으로 파손결과와 파손가능성을 5등급으로 구분하였다. 위 방법을 서울시 내 위치한 소규모 배수분구에 적용하여 위험도 매트릭스와 위험도 등급을 도출하였으며, 그 결과 전체 대상의 26%가 위험도 4-5등급인 CCTV조사 우선대상으로 선정되었다. 따라서 위험도 기반의 CCTV 우선순위 결정방법을 활용하여 조사가 우선적으로 필요한 대상을 체계적으로 결정할 수 있을 것이다.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.281-286
• /
• 2012

Single frame structures with notches were fractured by applying drop impact loadings at room temperature and low temperature. Johnson-Cook shear failure model has been employed to simulate the fractured single frame structures. Through several numerical analyses, material constants for Johnson-Cook shear failure model have been found producing the cracks resulted from experiments. Fracture strain-stress triaxiality curves at both room temperature and low temperature are presented based on the extracted material constants. It is expected that the fracture strain-stress triaxiality curves can offer objective fracture criteria for the assessment of structural fractures of polar class vessel structures fabricated from DH36 steels. The fracture experiments of single frame structures revealed that the structure on low temperature condition fractures at much lower strain than that on room temperature condition despite the same stress states at both temperatures. In conclusion, the material properties on low temperature condition are essential to estimate the fracture characteristics of steel structures operated in the Northern Sea Route.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.675-694
• /
• 2014

Annular and solid concrete specimens with different aspect ratios and static unconfined compressive strengths were studied for impact loading using SHPB test setup. Numerical simulations in LSDYNA were also carried out and results were validated. The stress-strain curves obtained under dynamic loading were also compared with static compressive tests. The mode of failure of concrete specimen was a typical ductile failure at high strain rates. In general, the dynamic increase factor (DIF) of thin solid specimens was higher than thick samples. In the numerical study, the variation of axial, hydrostatic and radial stresses for solid and annular samples was studied. The core phenomenon due to confinement was observed for solid samples wherein the applied loads were primarily borne by the innermost concrete zone rather than the outer peripheral zone. In the annular samples, especially with large diameter inside hole, the distribution of stresses was relatively uniform along the radial distance. Qualitatively, only a small change in the distribution of stresses for annular samples with different internal diameters studied was observed.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권3호
• /
• pp.221-226
• /
• 2010

The failure of a Kevlar29/Phenolic composite plate under high-velocity impact from an fragment simulation projectile was investigated using the nonlinear explicit finite element code, LS-DYNA. The composite laminate and the impactor were idealized by solid elements, and the interface between the laminas was modeled as a tiebreak type in LS-DYNA. The interaction between the impactor and laminate was simulated using a surface-to-surface eroding contact algorithm. When the stress level meets the given failure criteria, the layer in the element is eroded. Numerical results were verified through existing test results and showed good agreement.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.1-8
• /
• 2014

In this study, the numerical simulation using AUTODYN-3D program was investigated angle trajectory prediction for inclined impacts of projectiles. The penetration and perforation of polycarbonate plate by 7.62 mm projectile was investigated numerically. The characteristic structure of the projectile's trajectory in the polycabonate plates was studied. Two combined failure criteria were used in the target plate, and the target plate was modeled with the properties of polycarbonate for simulating the ricochet phenomenon. The effect of the angle of inclination on the trajectory and kinetic energy of the projectile were studied. The dynamic deformation behaviors tests of polycabonate were compared with numerical simulation results which can be used as predictive purpose. From the simulation, the ricochet phenomenon was occurred for angles of inclination of $0^{\circ}{\leq}{\theta}{\leq}20^{\circ}$. The projectile perforated the plate for ${\theta}{\leq}30^{\circ}$, thus defining a failure envelope for numerical configuration. The numerical analyses are used to study the effect of the projectile impact velocity on the depth of penetration (DOP). It can be observed that the residual velocities were almost linear relative to penetration velocities. It means that polycarbonate has high resistance at higher velocities.

• Structural Monitoring and Maintenance
• /
• 제6권1호
• /
• pp.19-32
• /
• 2019

One way to provide safe buildings and to protect tenants from the terrorist attacks that have been increasing in the world is to study the behavior of buildings members after being exposed to dynamic loads. Buildings behaviour after being exposed to attacks inspired researchers all around the world to investigate the effect of impact loads on buildings members like slabs and to deeply study the properties of High Performance Concrete. HPC is well-known in its high performance and resistance to dynamic loads when it is compared with normal weight concrete. Therefore, the aim of this paper is finding out the impact of dynamic loads on RPC slabs' flexural capacity, serviceability loads, and failure type. For that purpose and to get answers for these questions, three concrete slabs with 0.5, 1, and 2% steel fiber contents were experimentally tested. The tests results showed that the content of steel fiber plays the key role in specifying the static capacity of concrete slabs after being dynamically loaded, and increasing the content of steel fiber led to improving the static loading capacity, decreased the cracks numbers and widths at the same time, and provided a safer environment for the buildings residents.

• Composites Research
• /
• 제22권2호
• /
• pp.18-23
• /
• 2009

비선형 동적해석 유한요소 프로그램인 LS-DYNA를 이용하여 속 파편모의탄 충돌에 의한 Kevlar29/Phenolic 복합재 평판의 파손특성을 해석하였다. 적층판과 충격체는 고체요소를 사용하여 이상화하였고, 복합재 층과 층 사이 파손 해석을 위해서는 타이드 브레이크(tied-brake)요소를 사용하였다. 충격체와 복합재 적층판은 면-대-면 소멸 접촉 알고리즘을 사용하였다. 충격체에 의한 파손과 충격체의 관통을 모사하기 위해 응력이 일정한 파손기준식을 만족하면 해당되는 요소의 해당층은 제거된다. 해석 결과는 기존의 시험 결과와의 비교를 통해 검증한다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.26-30
• /
• 2000

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.506-516
• /
• 2007

In this paper, a study on low-velocity impact response of four different sandwich panels for the hybrid bodyshell and floor structure application of the Korean low floor bus vehicle was done. Square samples of 100mm sides were subjected low-velocity impact loading using an instrumented testing machine at six energy levels. Impact parameters like maximum force, time to maximum force, deflection at maximum force and absorbed energy were evaluated and compared for four different types of sandwich panels. The impact damage size and depth of the permanent indentation were measured by 3-Dimensional Scanner. Failure modes were studied by sectioning the specimens and observed under optical microscope. The impact test results show that sandwich panel with composite laminate facesheet could not observe damage mode of a permanent visible indentation after impact and has a good impact damage resistance in comparison with sandwich panel with metal aluminum facesheet.

• 한국추진공학회지
• /
• 제16권4호
• /
• pp.16-22
• /
• 2012

직경 22 mm 정도의 케이블 절단을 위한 케이블커터의 화약량 예측을 위하여 impact test machine을 이용한 낙하충격 시험을 실시하였다. Impact test 시험 결과는 Probit 방법으로 분석하였으며, 99% 신뢰도에서 99.99% 절단하는 에너지는 37.7 J로, 절단 평균 에너지는 24.9 J로 예측 되었다. 150 mg의 ZPP를 사용하여 시험한 결과, 케이블이 3번 모두 절단되었다. 이때 측정된 압력으로부터 계산된 에너지는 26.1 J이었으며 이 값은 impact 시험 결과나 화약에너지의 10%가 기계적 에너지로 변화된다는 가정 하에 ZPP 150 mg이 발생하는 기계적 에너지인 24.5 J과 아주 유사하다. Impact test의 분석결과를 적용하면 ZPP 230 mg의 화약으로 99% 신뢰도에서 99.99% 절단 확률을 보장할 수 있을 것으로 판단된다.