• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.145-149
• /
• 2011

Poly(butylenes terephthalate) have made large strides in applications of injection, extrusion, and molding material due to their excellent thermal resistance and appropriate mechanical properties. However, PBT was not hard polymer but a soft polymer which caused low absorption of external energy and the defect of being easily broken with the strong impact. Thus, the electron beam irradiation was carried out over a range of irradiation doses from 100 to 1,000 kGy for enhancing the properties. The decreases of $T_m$, $T_c$, and enthalpy were observed as increasing the absorbed dose in the results of DSC analysis. The improvement in the impact strength of PBT was clearly observed as the absorbed dose was increased. This was probably due to the 3-dimensional network structures, resulting in increasing the absorption of impact energy. In addition, the wear properties had increased at higher than 300 kGy. The negative deviation of weight loss confirmed the improvement of the wear properties of PBT, as evidenced by SEM observation on the wear surfaces.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.2
• /
• pp.154-161
• /
• 2011

In increasingly competitive market conditions, domestic construction companies are struggling to secure a competitive edge by increasing consumer satisfaction. In these circumstances, a greater emphasis needs to be put on providing an upgraded level of quality in the area of addressing defects to the satisfaction of customers, which is considered to have a great impact on customer satisfaction. This empirical study of the relationships among service quality, customer satisfaction, and repurchase intention aims to provide basis data for increasing service quality, particularly in dealing with the defect issues facing construction companies. To this end, a literature review was carried out on the concept of service quality along with defect issues, and customer satisfaction and influential factors were identified. Building on these foundations and findings, a survey was administered to residents in housing dwellings such as apartments. The results of this study are expected to heighten awareness of the need for increased service quality, which may have a critical influence on customer satisfaction and repurchase intention, and will thereby contribute to enhancing competitiveness and other aspects of the current construction industry.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.1-7
• /
• 2004

The polyethylene pipe can use semi-permanent because of the high corrosion resistance with chemical stability. In addition to, there is the merit that is an easy to establish and to maintain. However, as the reason that it is simply degraded when the polyethylene pipe was exposed to the outside, mainly it is used to lay under the ground with low-pressure gas transportation pipe. In this study, the nondestructive evaluation method was used to maintain the integrity of the polyethylene pipe. We simulated the various defects on the polyethylene pipes, and then the AE signal occurred according to the impact test of steel ball was evaluated by the acoustic emission method. From the results, the waveform and dominant frequency could be distinguishing from the defect shapes of polyethylene pipe. Especially, in the case of notch defect, the AE signals occur different by the angle and depth of the notch.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.102-114
• /
• 2021

NDF (No Defect Found) is a phenomenon in which defects have been found in the manufacturing, operation and use of a product or facility, but phenomenon of defects is not reproduced in the subsequent investigation system or the cause of the defects cannot be identified. Recently, with the development of the fourth industrial revolution, convergence of hardware and software technologies in various fields is spreading to products such as aircraft, home appliances, and mobile devices, and the number of parts is increasing due to functional convergence. The application of such convergence technologies and the increase in the number of parts are major factors that lead to an increase in NDF phenomena. NDF phenomena have a significant negative impact on cost, reliability, and reliability for both manufacturers, service providers and operators. On the other hand, due to the nature of NDF phenomena such as difficult and intermittent cause identification and ambiguity in judgment, it is common to underestimate the cost of NDF or fail to take appropriate countermeasures in corporate management. Therefore, in this paper, we propose a methodology for estimating NDF costs by the PAF model which is a quality cost analysis model and ABC (Activity Based Costing) technique. The methodology of this study suggests a detailed procedure and the concept to accurately estimate the NDF costs, using ABC analysis, accounting system information, and IT system data. In addition case studies have validated the methodology. We think this could be a valid methodology to refer to when estimating the cost of other parts. And, it is meaningful to provide important judgment information in the decision-making process based on quality management and ultimately reduce NDF costs by visualizing them separately by major variable factors.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2022

During the past decades, detection of gear defects remains as a major problem, especially when the gears are subject to non-stationary phenomena. The idea of this paper is to mixture a multilevel wavelet transform with a fast EMD decomposition in order to early detect gear defects. The sensitivity of a kurtosis is used as an indicator of gears defect burn. When the gear is damaged, the appearance of a crack on the gear tooth disrupts the signal. This is due to the presence of periodic pulses. Nevertheless, the existence of background noise induced by the random excitation can have an impact on the values of these temporal indicators. The denoising of these signals by multilevel wavelet transform improves the sensitivity of these indicators and increases the reliability of the investigation. Finally, a defect diagnosis result can be obtained after the fast transformation of the EMD. The proposed approach consists in applying a multi-resolution wavelet analysis with variable decomposition levels related to the severity of gear faults, then a fast EMD is used to early detect faults. The proposed mixed methods are evaluated on vibratory signals from the test bench, CETIM. The obtained results have shown the occurrence of a teeth defect on gear on the 5th and 8th day. This result agrees with the report of the appraisal made on this gear system.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.55-64
• /
• 2013

The complexity of constructing medical institutions is higher than that of general buildings, and many change orders in the design and defect repairs in the construction phase are required due to strict government regulations. The priority control of constructions and impact factors of medical institutions were analyzed in this study, and difficulties in the control in the design and construction phase were identified. First, the priority management factors that were identified were as follows: architecture, facilities, and electricity. Second, 1) priority management in constructions and factors resulting in change orders and 2) priority management in constructions involving defect repair were analyzed. Third, the importance recognized by the construction managers were analyzed. The priority management in constructions and factors that were recognized by the construction manager were deducted as having low importance, although there were many change orders and defects. The work of finishing, wall building, joining, office automation and communication function, and lighting were analyzed in the design phase, and waste, the office automation and communication function, ceilings, contamination control, and plumbing were analyzed in the construction phase. The results showed that there will be a decrease in change orders and defects if the concentration of the manager was elevated and priorities were managed.

• Journal of Energy Engineering
• /
• v.22 no.3
• /
• pp.287-293
• /
• 2013

This study was carried out to diminish the formation of scale in boilers which is one of the defect elements when they are operating. The defect relating to scale can cause a fatal impact on the explosion of boilers due to the overheating of their tubes, or it can affect the flow of water inside boilers with its bad circulation and result in a disparity of water inside the equipment. Heat transfer in the scale is low comparing to the boiler material, so it can lead to energy losses and has also impact on the global warming. In 2005, the Korean government introduced a system which requires boiler users to install the equipment which can prevent or eliminate the formation of scale to improve the management of water quality in boilers. The study on the techniques for preventing or eliminating the formation of scale started in 1821 and since then subsequently there have been lots of similar studies. The first one was about the scale reduction using potato starch. Since an ultrasonic scale preventer developed by a scientist from a Russian acoustic institute was introduced in1993, a variety of equipment of this kind have been disseminated in Korea. There has been a need to demonstrate the condition for the best performances of such equipment. Boilers are mostly composed of the main body and 288 the tube with a circular curved surface. I carried out a demonstration study on a circular tube which affects the scale defect the most among the boiler components. As a result of it, I found out the fact that the ultrasonic wave needs to reach a certain level of sound pressure and frequency to affect the formation of scale.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.47-56
• /
• 2009

Rock bolts and shotcrete play a crucial role as a main support system in the underground space. Thus, the safety of the underground space may be affected by the defect of rock bolts. In order to evaluate the rock bolt integrity by using non-destructive technique, the transmission method of the guided ultrasonic waves, which are generated by using the piezo disk elements has been successfully performed. The energy generated by the piezo disk elements, however, is not enough for the rock bolts in the field. In addition, the piezo disk elements should be installed at the end of the steel bar during construction of the rock bolts. The purpose of this study is the devolvement of the reflection method, which may generate enough energy, and the application in the field rock bolts. Both laboratory and field tests are carried out. The guided ultrasonic waves with high energy are generated by the hammer impact with the center punch, and the AE sensor is used to measure the reflected guided waves. The received guided waves are analyzed by the wavelet transform. The peak value of the wavelet transform produces the energy velocity, which is used for the evaluation of the rock bolt integrity. The energy velocity increases with an increase in the defect ratio in both laboratory and field rock bolts. This study demonstrates that the hammer-impact reflection method may be a suitable method for the evaluation of the rock bolt in the field.

• Journal of Sensor Science and Technology
• /
• v.28 no.6
• /
• pp.371-376
• /
• 2019

We have developed an acoustic resonance inspection system to inspect the welding defects in the mechanical parts fabricated using friction stir welding method. The inspection system was consisted of a DAQ board, a microphone sensor, an impact hammer, and controlled by a PC software. The system was developed to collect and analyze the sound signal generated by hitting the sample with an impact hammer to determine whether it is defective. In this study, 100% welded good samples were compared with 95%, 90%, and 85% welded samples, respectively. The variation of the completeness in welding did not affect the visual appearance in the samples. As a result of analyzing the natural frequencies of the good samples, the five natural frequency peaks were identified. In the case of the defective samples, the frequency change was observed. The welding failure detection time was fast enough to be only 0.7 seconds. Employing our welding defect inspection system to the actual industrial field will maximize the efficiency of quality inspection and thus improve the productivity.

• Child Health Nursing Research
• /
• v.22 no.4
• /
• pp.326-335
• /
• 2016

Purpose: It is crucial to provide adequate enteral nutrition for postoperative recovery, wound healing and normal growth in infants in pediatric cardiac ICUs. This study was done to develop a feeding protocol using the vaso-active inotropic (VAI) score and to evaluate the impact of nutritional outcomes following the new feeding protocol for infants who underwent cardiac surgery. Methods: This study consisted of three phases. First, a feeding protocol was developed based on a literature review. Second, ten experts rated the content validity. Third, a comparison study was conducted to evaluate the impact of the new feeding protocol. Data were analyzed using SPSS Version 20. Results: Twenty-nine infants were enrolled in the pre-protocol group, and 22 infants in the post-protocol group. Patients in the 2 groups were similar. Time to reach feeding goal was significantly decreased from 56.0 (27-210) hours to 28.5 (10-496) hours in the post-protocol group (Z=-4.22, p<.001). Level of enteral feeding knowledge among nurses increased significantly after implementation of the protocol. Conclusion: The feeding protocol using VAI score facilitates the achievement feeding goal to decrease feeding interruptions and help nurses in their practice. Larger studies are necessary to examine clinical outcomes following the implementation of this feeding protocol.