• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.299-306
• /
• 2017

본 연구에서는 비말대, 간만대, 침지대의 해양환경 폭로에 의한 슬래그 치환 콘크리트와 슬래그 콘크리트의 염화물 이온 침투 저항성을 검토하였다. 설계기준강도 24 MPa의 슬래그 치환 콘크리트의 슬래그 콘크리트를 제조하여, 압축강도, 주사전자현미경에 의한 미세구조의 관찰, 실내 촉진실험을 통한 비정상상태의 염화물 이동계수, 해양환경 폭로 조건에 따른 염화물 이온 침투 깊이, 탄산화 깊이를 평가하였다. 실험결과, 실내 촉진실험과는 다르게 간만대, 침지대에 폭로한 시험체의 염화물 이온 침투 깊이가 단계적으로 감소되는 것을 확인하였다. 또한, 간만대에 폭로한 시험체가 조수간만에 의한 해수의 건습작용에 의해 염화물 이온 침투 깊이가 가장 큰 것으로 나타났다. 한편, 비말대에서는 간만대와 침지대와는 다르게 고로슬래그 미분말의 치환율이 증가할수록 염화물 이온 침투 깊이가 증가하는 경향을 보였다.

• International Journal of Concrete Structures and Materials
• /
• 제4권2호
• /
• pp.109-112
• /
• 2010

Part I of this study was devoted to the electrical accelerated chloride diffusion in mortars. In this second part, natural chloride diffusion has been investigated for four types of mortars under exposure to a 0.5 mol/L NaCl solution for a period of up to 35 days. Two different types of sand were used for the production of test samples: siliceous sand (used as a reference) and limestone sand (used in this study). The effect of water to cement ratio and exposure time on the diffusion coefficients of mortars was also investigated. In this study, the total and free chloride content and penetration depth of mortar were measured after immersion, and Fick's second law of diffusion was fitted to the experimental data to determine the diffusion coefficient. Their results show that the use of crushed limestone sand in mortar had a positive effect on the chloride resistance. The apparent diffusion coefficient in all specimens was smaller than that in siliceous sand mortar. However, the chloride penetration of these mortars was increased as exposure time progressed.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.59-59
• /
• 2002

Sn-Ag-Cu solder is known as most competitive in many kinds of Pb-free solders. In this study, effects of solderability with plated layers such as Cu, Cu/Sn, Cu/Ni and Cu/Ni/Au were investigated. Sn-3.5Ag-0.7Cu solder balls were reflowed in commercial reflow machine (peak temp. : 250℃ and conveyer speed : 0.6m/min). In wetting test, immersion speed was 5mm/sec., immersion time 5sec., immersion depth 4mm and temperature of solder bath was 250℃. Wettability of Sn-3.5Ag-0.7Cu on Cu, Cu/Sn (5㎛), Cu/Ni (5㎛), and Cu/Ni/Au (5㎛/500Å) layers was investigated. Cu/Ni/Au layer had the best wettability as zero cross time and equilibrium force, and the measured values were 0.93 sec and 7mN, respectively. Surface tension of Sn-3.5Ag-0.7Cu solder turmed out to be 0.52N/m. The thickness of IMC is reduced in the order of Cu, Cu/Sn, Cu/Mi and Cu/Ni/Au coated layer. Shear strength of Cu/Ni, Cu/Sn and Cu was around 560gf but Cu/Ni/Au was 370gf.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.783-788
• /
• 2002

Sn-Ag-Cu solder is known as most competitive in many kinds of Pb-free solders. In this study, effects of solderability with plated layers such as Cu, Cu/Sn, Cu/Ni and Cu/Ni/Au were investigated. Sn-3.5Ag-0.7Cu solder balls were reflowed in commercial reflow machine (peak temp.:$250^{\circ}C$and conveyer speed:0.6m/min). In wetting test, immersion speed was 5mm/sec., immersion time 5sec., immersion depth 4mm and temperature of solder bath was $250^{\circ}C$. Wettability of Sn-3.5Ag-0.7Cu on Cu, Cu/Sn ($5\mu\textrm{m}$), Cu/Ni ($5\mu\textrm{m}$), and Cu/Ni/Au ($5\mu\textrm{m}/500{\AA}$) layers was investigated. Cu/Ni/Au layer had the best wettability as zero cross time and equilibrium force, and the measured values were 0.93 sec and 7mN, respectively. Surface tension of Sn-3.5Ag-0.7Cu solder turmed out to be 0.52N/m. The thickness of IMC is reduced in the order of Cu, Cu/Sn, Cu/Mi and Cu/Ni/Au coated layer. Shear strength of Cu/Ni, Cu/Sn and Cu was around 560gf but Cu/Ni/Au was 370gf.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.401-411
• /
• 2019

Non-contact judgment and evaluation for products are increasingly needed along with a rapid environmental change in fashion that sows urgency in the need to implement services that allows users to judge and experience a tactile sense in a fashion product without actual contact. Technological development is required to provide users with syn-aesthetic experiences that integrate the visual, tactile and the auditory. There is also a need to conduct research to increase immersion that provides users with ICT-related experiences communicated through fashion images. The study analyzed demands for haptic communication technology by Korean users in immersive VR fashion product shopping. Accordingly, it defined haptic communication through literature research, investigated immersion in the VR environment and conducted in-depth interviews for haptic communication applicable to VR shopping. Findings show that hedonic reactions by fantasy, emotion and fun function are an important motive in selecting VR shopping. VR fashion product shopping steps were divided into 4: move to store, search in store, search of product and purchase based on offline store shopping experience. It defined the haptic communication by steps and analyzed the types of the haptic feedback to be implemented. The study results provide basic data for developing haptic communication technology that can enhance e a sense of the presence and immersion experiences that can help lay a groundwork for pilot studies on the convergence of the virtual and the real.

• 대한간호학회지
• /
• 제34권1호
• /
• pp.15-24
• /
• 2004

Purpose: The purpose of this research was to explore the cyber world immersion experience of adolescents. Method: Multiple strategies for data collecting were used: an in depth face-to-face interview; analysis of adolescent' writings; and analysis of examples of phenomenon in the realistic world. The sample group consisted of 10 adolescents. Results: Although the experience was different for all adolescent interviewed, the essential themes of experience emerged: "fill up", "homoeologous feeling", "the older generation has a conflicting negative opinion", "change in social character", "become habitually skeptic", "have bad health", "mean of superiority and getting everything solved", "ease of access", "monetary benefit", "addiction to the computer", "forget real life solved stress", "do harm to society", "take comfort", or "new job". Conclusion: Accordingly this paper suggests that contact with various software is necessary in adolescents, and good quality contents function to prepare and activate adolescents to apply the internet for good use.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.117-132
• /
• 1996

The purpose of this study was to evaluate the bacterial adherence on e-PTFE membrane immersed in whole saliva from subjects with different periodontal status. Experiment involved 3 subject groups: 5 persons with healthy periodontium(probing depth below 3mm and no signs of gingival inflammation including bleeding on probing), 10 patients with gingivitis(probing depth below 3mm and apparent signs of gingival inflammation), and 10 patients with advanced periodontitis(probing depth over 7mm and apparent signs of gingival inflammation). Each disease group was included before and after scaling and root planing treatment. After obtaining whole saliva from each subject, e-PTFE membrane(Gore-Tex periodontal membrane : $GTPM^{(R)}$, W.L. Gore & Associates, Flagstaff, USA) specimens were immersed at room temperature in the saliva aliqouts for 1, 3, 7 days. The weight between pre - and post - immersion in saliva was measured with the analytical balance and the difference was recorded. The specimens were processed for SEM observation. The bacterial adherence on the membrane specimens was evaluated using the scanning electron microscope images. The obtained results were as follows : 1. There was no difference in the weight of bacteria adherent to e-PTFE membrane specimens according to the periodontal status and the immersion periods. 2. As the exposure time to saliva increased, the bacterial adherence to the membrane specimen significantly increased in all groups(P<0.005). 3. As the severity of periodontal disease increased, the bacterial adherence to the membrane specimens significantly increased(p<0.001). 4. After scaling and root planing, the bacterial adherence to the membrane specimens significantly decreased in gingivitis and periodontitis patient group(P<0.001). These results suggest that bacterial contamination on exposed barrier membrane surface be reduced through improvement of periodontal status and oral health environment before and after GTR procedure for the successful outcome.

• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.154-165
• /
• 2024

Acetic acid and acetonitrile produced in the chemical process of petrochemical plants are used at high temperatures and pressures. They are exposed to harsh corrosive environments. The present investigation aimed to evaluate corrosion characteristics of metals with excellent corrosion resistance by performing immersion and electrochemical experiments with different composition ratios of acetic acid and acetonitrile in a high-temperature and high-pressure environment. Results of immersion experiment revealed that as acetic acid concentration increased, surface damage and corrosion also increased. In immersion experiments under all conditions, super austenitic stainless steel (UNS N08367) had the best corrosion resistance among various metals. The maximum damage depth under the most severe immersion conditions was observed to be 4.19 ㎛, which was approximately 25.25 ㎛ smaller than that of highly damaged stainless steel (UNS S31804). As a result of electrochemical experiments, electrochemical characteristics of various metals presented some differences with different composition ratios of acetic acid and acetonitrile. However, super austenitic stainless steel (UNS N08367) had the best corrosion resistance at a high pressure condition with a high concentration of acetic acid.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.88-98
• /
• 2014

A supercavitation is modern technology that can be used to reduce the frictional resistance of the underwater vehicle. In the process of reaching the supercavity condition which cavity envelops whole vehicle body, a vehicle passes through transition phase from fully-wetted to supercaviting operation. During this phase of flight, unsteady hydrodynamic forces and moments are created by partial cavity. In this paper, analytical and numerical investigations into the dynamics of supercavitating vehicle in transition phase are presented. The ventilated cavity model is used to lead rapid supercavity condition, when the cavitation number is relatively high. Immersion depth of fins and body, which is decided by the cavity profile, is calculated to determine hydrodynamical effects on the body. Additionally, the frictional drag reduction associated by the downstream flow is considered. Numerical simulation for depth tracking control is performed to verify modeling quality using PID controller. Depth command is transformed to attitude control using double loop control structure.

• 한국멀티미디어학회논문지
• /
• 제17권6호
• /
• pp.733-740
• /
• 2014

With the development and spread of 3D display, users can easily experience an augmented reality with 3D features. Therefore, the demand for content of an augmented reality is exponentially growing in various fields. A traditional augmented reality environment was generally created by CG(Computer Graphics) modelling production tools. However, this method takes too much time and efforts to create an augmented environment. To create an augmented environment similar to the real world, everything in the real world should be measured, gone through modeling, and located in an augmented environment. But the time and efforts spent in the creation don't produce the same environment as the real world, making it hard for users to feel the sense of reality. In this study, multi-scale 3D panorama content augmented system is suggested by using a depth-map. By finding matching features from images to add 3D features to an augmented environment, a depth-map is derived and embodied as panorama, producing high-quality augmented content system with a sense of reality. With this study, limits of 2D panorama technologies will be overcome and a sense of reality and immersion will be provided to users with a natural navigation.