• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.111-112
• /
• 2015

There is high possibility of steel corrosion on the reinforced concrete exposed to marine environment by chloride ion penetration. And it show a big difference of concrete durability under conditions of splash zone, tidal zone, and immersion zone. Therefore, in this paper, half-cell potential and chloride ion penetration depth was measured to evaluate the durability of slag concrete by marine exposure experiment. As a result, SC70 specimen showed no steel corrosion, regardless of the marine exposed conditions. Also, a deterrent effect on chloride ion penetration by replacement of slag in tidal zone and immersion zone could be confirmed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.4
• /
• pp.52-66
• /
• 2003

Generally we have difficulty in removing oil using mechanical devices because recovery rate and recovery efficiency decrease remarkably when operating in thin oil films or in oils of very high viscosity In the Present study a series of experiments were carried out to study the effect of operating conditions on the rate of recovery for the spilled oil using a drum type skimmer. For each set of experiments depth of immersion, oil film thickness and the circumferential speeds were varied systematically to find the effects on the recovery rate. The results shows that recovery rate is dependent on the contact angle for the depth of immersion and the highest rate of oil recovery shows in the case of a contact angle of 45°(h/d=0.15). For the removal of spilled oil the optimal circumferential speed can be found as the critical value to reach the saturated recovery rate for a given oil film thickness and depth of immersion. Even in thin oil thickness we have enough recovery rate and recovery efficiency within critical circumferential speed this way.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.427-434
• /
• 2005

The free surface influenced the wake behind a rotating propeller and its effects were investigated experimentally in a circulating water channel with the variation of water depth. Instantaneous velocity fields were measured using two-frame PIV technique and ensemble-averaged to study the phase-averaged flow structure in the wake region. For an isolated propeller, the flow behind the propeller is affected only by the propeller rotation speed, the leading on the blades and the proximity of the propeller to the free surface. The phase-averaged mean velocity fields show that the potential wake and the viscous wake developed on the blade surfaces. The interaction between the tip vortices and the slipstream causes the oscillating trajectory of tip vortices. The presence of the free surface greatly affected the wake structure, especially for propeller immersion depth of 0.6D. At small immersion depths, the free surface modified the tip and trailing vortices and the slipstream flow structure downstream of X/D = 0.3 in the propeller wake.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.241-242
• /
• 2021

In this study, we develop the damage depth diagnostic technology of fire damage concrete and propose an method of impaired depth due to fire by drying impaired concrete after immersing. Test results indicated that when assesing impared depth due to fire with the dry method after water immersing, impaired depth was clearly found and furthermore, compared with that by Phenolphthalein method 10 mm of damage depth was additionally identified, which is imposible to asses when Phenolphthalein is applied.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.245-246
• /
• 2021

In this study, we develop the damage depth diagnostic technology of fire damage concrete and propose an method of impaired depth due to fire by drying impaired concrete after immersing. Test results indicated that when assesing impared depth due to fire with the dry method after water immersing, impaired depth was clearly found and furthermore, compared with that by Phenolphthalein method 15 mm of damage depth was additionally identified, which is imposible to asses when Phenolphthalein is applied.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.243-244
• /
• 2021

In this study, we develop diagnostic technology for damage depth of fire-damaged concrete and propose methods for damage caused by fire by drying damaged concrete after immersion. As a result of the test, the damaged depth was clearly found when evaluating the depth of impurities caused by fire in a drying method after water had permeated, and it could be verified using thermogravimetric analysis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.2
• /
• pp.77-84
• /
• 2009

This paper is to investigate the effect of the immersion time in the traditional hairtail hand line for developing the fishing methods and the fishing gear in the coast of jeju. The operating of 32 times was made with each different immersion time of hairtail hand line, and the relations between the catch and the immersion time were examined. As the result, targeted species rate was over 98% of total catch. From about 800 seconds after casting, the hooking rate was decreased and the bite loss rate was increased, it seems to be made by the decreasing factors of predators including the cutting of branch lines etc. In addition, it was supposed that the hooking rate and the bait loss rate had a deep connection with feeding time zone. The level of the correlation coefficient of the bait loss rate according to the immersion time was 0.54 at $p{\leq}0.01$, in the case of the hooking rate, 0.59 was chosen after about 800 seconds. The hooking rate and the bait loss rate according to the hook number were not irrelevant to the fish school layer. Additionally, it was assumed that the bait loss rate was related to the depth of water.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.685-688
• /
• 2005

In the micro electrochemical machining (MECM) using ultra short pulses, the machining rate is closely related to the tool electrode area. The machining rate varies according to the machining depth or the immersion depth. When using insulated tool electrodes, those depths do not matter. In addition, micro structures with high machining depth can be fabricated because the machining characteristics do not vary with the machining depth. Another advantage of insulated electrodes is prevention of taper shape. Micro structures with high machining depth or high aspect ratio were fabricated using insulated tool electrodes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.16-22
• /
• 2023

In this study, a salt water immersion test was performed on concrete specimens simulating the concrete mix design of the nuclear power plant, and the correlation between the amount of chloride and the XRF component according to the depth of the concrete was analyzed. The amount of chloride on the surface of the nuclear power plant concrete increased slightly with increasing immersion time in salt water, but the amount of chloride in the depth of 5.5 mm or more showed a clear tendency to increase with increasing immersion time in salt water. As a result of analyzing the correlation between the amount of chloride in concrete and the XRF component, the concrete with 20% FA substitution compared with the OPC concrete showed a very high correlation between the composition ratio of Cl ions and the evaluation result of salt damage resistance by XRF component analysis. Accordingly, it was confirmed that chlorine ion analysis and salt damage resistance performance evaluation by XRF component analysis were possible through repeated data accumulation in the nuclear power plant concrete mix with 20% fly ash replacement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.343-344
• /
• 2010

markerless system to a two-dimensional imaging is used to estimate the depth map as a stereo vision system uses expensive equipment. We estimate the depth map from monocular image enhancement and object extracted relative to the vanishing point is estimated depth map. Augmented objects in order to get better virtual immersion depending on the distance of the objects should be drawn in different sizes. In this paper, creating images obtained from the vanishing point, and in-depth information on the augmented object, augmented with different sizes and improved engagement of inter-object interaction.