• 한국양식학회지
• /
• 제16권4호
• /
• pp.229-232
• /
• 2003

이 연구에서는 인공종묘 생산된 북방대합 치패를 대상으로 수온, 염분 및 공기 중 노출에 따른 생존율과 방류를 위한 잠사 능력을 조사하였다. 수온 4∼28$^{\circ}C$ 범위에서 10일간 치패의 수온에 따른 생존율은 차이가 없었으며 ,염분 22 psu 이상에서는 50% 이상의 생존율을 보였다. 또한 기온 2$0^{\circ}C$이하의 공기 중 노출에서 12시간 이내에는 생존율에 차이가 없었으나 $25^{\circ}C$에서는 16시간 이상에서 50% 이하의 생존율을 보였다 각 장에 따른 잠사능력은 각 장이 증가할수록 잠입시간은 길어지고 잠입률은 감소하였으며, 각장 15mm 이하의 치패는 10분 이내에 90% 이상 잠입하였다. 저질모래 크기에 따른 잠입시간과 잠입률에는 차이가 나타나지 않았다.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.873-881
• /
• 2002

In this paper, a on-line estimation method of the radial immersion angle using cutting force is presented. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the immersion angle is a function of the immersion angle and the ratio of radial to tangential cutting force. It is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle, which implies that the ratio determined by one preliminary experiment can be used regardless of the cutting conditions for a given tool and workpiece material. Using the measured cutting force during machining and predetermined ratio, the radial immersion ratio is estimated in process. Various experimental results show that the proposed method works within 5% error range.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.178-185
• /
• 1999

In tool condition monitoring systems, parameters should be set to a certain threshold. In many cases, however, the threshold is dependent on cutting conditions, especially the radial immersion ratio. In this presented is a method of on-line estimation of the radial immersion ratio in face milling. When a tooth finishes sweeping, a sudden drop of cutting force occurs. The force drop is equal to the cutting force that acting on a tooth at the swept angle of cut and can be acquired from cutting force signals in feed and cross-feed directions. Average cutting force per tooth period can also be calculated from cutting force signals in two directions. The ratio to cutting forces in two directions acting on a tooth at a certain swept angle of cut and the ratio of average cutting forces in two directions per tooth period are functions of the swept angle of cut and the ratio of radial to tangential cutting forces. Using these parameters, the radial immersion ratio is estimated. Various experiments are performed to verify the proposed method. The results show that the radial immersion ratio can be estimated by this method regardless of other cutting conditions.

• 한국식품영양과학회지
• /
• 제19권3호
• /
• pp.234-238
• /
• 1990

The effects of salt concentration immersion time in a salt solution prior to air dehydration and heating of air temperature during dehydration upon the browning reaction and pyruvic acid content of air dried garlics to a 6.5% moisture content(wet basis) were analyzed by a response surface methodology(RSM), Those values were also predicted by using a second degree polynomial regression model. Heating of air temperature was the most significant factor affecting the both browning reaction and pyruvic acid content. Salt concentration had more influence to browning reaction than immersion time whereas immersion time was more impor-tant factor than salt concentration on a retention of pyruvic acid sugested different processing conditions. While the processing conditions to minimize the browning reaction(O.D=0.009) were 0.3% of salt solution 9 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(O.D=0.022) of air dehydration at 5$0^{\circ}C$ Pyruvic acid contents were maximized(174 $\mu$mole/g garlic solid) at the 0.1% of salt solution 3 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(147 $\mu$mole/g garlic solid) of air dehydration at 5$0^{\circ}C$

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.91-98
• /
• 2000

In this paper , presented is a method of on-line estimation of the radial immersion ratio and cutting force ratio using cutting force. When a tooth finishes sweeping, sudden drop of cutting forces occurs. These force drops are equal to the cutting forces that act on a single tooth at the swept angle of cut and can be obtained from cutting force signals in feed and crossfeed directions. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the swept angle of cut is a function of the swept angle of cut and the ratio of radial to tangential cutting force. In the research, it is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle. Therefore, the ratio of radial to tangential cutting force determined by just one preliminary experiment can be used regardless of the cutting conditions. Using the measured cutting forces, the radial immersion ratio is estimated along with the cutting force ratio at that immersion angle. Various experiments show that the radial immersion ratio and instantaneous ratio of the radial to tangential direction cutting force can be estimated by the proposed method very well.

• 한국식품영양과학회지
• /
• 제26권5호
• /
• pp.866-871
• /
• 1997

This study was carried out to determine the effect of osmotic dehydration as pretreatment on the qualities of dried cherry-tomatoes. The weight reduction and solid gain in osmosed cherry-tomato were increased by increasing sugar concentration, immersion temperature and time; among three parameters, the immersion temperature affected more than sugar concentration and immersion time did. The moisture content was decreased as increasing sugar concentration, immersion temperature and time, and it was the lowest at the osmotic conditions of 7$0^{\circ}C$, 60$^{\circ}$Brix and 11hr. To determine the optimum processing condition by RSm, the polynomial optimum models were established. The regression models was significant (p<0.05). It was used contour plots to optimize osmotic dehydration. The optimum condition for osmotic dehydration as pretreatments for drying of cherry-tomatoes were immersion temperature of 47~53$^{\circ}C$, sugar concentration of 39~43$^{\circ}$Brix, and immersion time of 7hr, in which process conditions were 78~86% moisture content, 8.5~10$^{\circ}$Brix sugar content and 80~86% weight reduction.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.52-58
• /
• 2006

The effect of various environmental conditions on the durability of E-glass fiber/vinylester resin composites have been investigated using the tensile test specimen of strand type. It was found that the durability test method performed by the stand type specimen was more convenient and reliable than other conventional test method. The weight gains increased with the immersion time in both water and alkaline solution, and the Weight gains at $50^{\circ}C$. were much bigger than those at $20^{\circ}C$ in both conditions. The tensile strength decreased with the pass of immersion time in all aqueous solution, and the tensile strength at $80^{\circ}C$ in alkaline solution decreased very steeply at beginning of immersion time. The decrement of tensile strength according to the immersion time in various environmental conditions was mainly caused by the degradation of interface and the damage of glass fiber surface.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.880-889
• /
• 2016

To evaluate the resistance of wood to decay caused by fungi, sapwood and heartwood of red pine (Pinus densiflora) and sapwood and heartwood of larch (Larix kaempferi) were conducted. Wood samples were immersed for 96 h in pyroligneous liquor. Then, the brown-rot fungus, Fomitopsis palustris, was used to examine the decay resistance of red pine and larch. Weight and density of wood from the all conditions increased after immersion treatment. Weight loss after decay resistance test was also dropped with a immersion treatment. The lowest weight loss indicated at immersion-treated heartwood of larch. Immersion treatment using pyroligneous liquor effectively increased the resistance of wood to decay caused by fungi.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.239-244
• /
• 1999

Radial immersion ratio is an important factor to determine the threshold in face milling and should be estimated in process for automatic force regulation. In this paper, presented is a method of on-line estimation of radial immersion ratio using cutting force. When a tooth finishes sweeping, sudden drop of cutting forces occurs. These force drops are equal to the cutting forces that act on a single tooth at the swept angle of cut and can be acquired from cutting force signals in feed and cross-feed directions. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the swept angle of cut is a function of the swept angle of cut and the ratio of radial to tangential cutting force. In the research, it is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle. Therefore, the ratio of radial to tangential cutting force determined by just one preliminary experiment can be used regardless of the cutting conditions. Using the measured cutting forces and predetermined ratio, the redial immersion ratio is estimated. various experiments show that the radial immersion ratio can be estimated by the proposed method very well.

• 산업경영시스템학회지
• /
• 제35권3호
• /
• pp.136-147
• /
• 2012

The human resources of an enterprise is very important to survive in these days of business environment. This study investigates the influence of four behavioral types in MBTI (Myer-Briggs Type Indicator) and working conditions on organizational effectiveness. Job satisfaction and immersion have been regarded as a key conception of organizational effectiveness. The focus of this study is to investigate the effects of R&D employee's four behavioral types in MBTI and working conditions on organizational effectiveness. The results of this study show that organizational effectiveness is influenced by personality types and working conditions. According to the result, First, about the analysis of differences in job satisfaction, EP (Extraversion Perceiving)-type (3.56) and EJ (Extraversion Judging)-type (3.43) are higher than IJ (Introversion Judging)-type (3.07) and IP (Introversion Perceiving)-type (3.03) of four behavioral types in MBTI. So an enterprise makes various efforts to enhance job satisfaction for IJ (Introversion Judging)-type and IP (Introversion Perceiving)-type. Second, For improving the organizational effectiveness that is job satisfaction and immersion, an enterprise must make favorable working conditions to each four behavioral types in MBTI of R&D employees. In order to improve job satisfaction, the enterprise will provide IJ (Introversion Judging)-type with support for collegiality and IP (Introversion Perceiving)-type with good relationships with superiors. and also the enterprise gives autonomic authority to EJ (Extraversion Judging)-type. Finally, in the case of EP (Extraversion Perceiving)-type, the enterprise must admit failure for efforts. In order to improve job immersion, the enterprise will provide IP (Introversion Perceiving)-type with good relationships with superiors, the vision of company and compensation for creative work. and also the enterprise gives autonomic authority to EJ (Extraversion Judging)-type.