• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1469-1471
• /
• 2009

Effect of contamination of liquid crystal on the electrical behavior of liquid crystal display (LCD) by spilled components from color filter layer was investigated. It is noted that the level of contamination was different following the kind of liquid crystal and organic layers. Transmittance curve of LCD cell was shifted by spilled components of color filter and BM materials. C-V curve also showed different behavior following color filter type. The results obtained show the image sticking of LCD can be varied by pairing liquid crystal with color filter materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.571-573
• /
• 2007

It is known that the main source of the area image sticking is the ion charge adsorption on the alignment layer. We found out that the adsorption of the ion charge of the liquid crystal in the cell was physisorption, which takes place between all molecules on any surface providing the adsorption force is small.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.131-143
• /
• 2008

According to the Korea Agency for Technology and Standards under the Commerce Ministry, OLED device's lifetime is defined 50% drop of luminance. OLED device is self-emitting operating device, that means it becomes different color between pixels under using environment. That's reason of the different luminance drop ratio & chromaticity coordinates shift ratio with time. The problem is there is not recovered after luminace drop and color shift. We can recognize the difference of color as image sticking. First we studied when human recognize the difference of color and second we apply the method of OLED device's lifetime test that's able to check different color between pixels

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.3
• /
• pp.126-132
• /
• 2002

The origin of image-sticking in metal-insulator-metal type thin-film diode liquid crystal displays(TFD-LCDs) is the asymmetric current-voltage(I-V) characteristic of TFD element. We developed that TFD-LCDs have reduced-image-sticking. Tantalum pentoxide(Ta$_2$O$\sub$5/) is a candidate for use in metal-insulator-metal(MIM) capacitors in switching devices for active-matrix liquid crystal displays(AM-LCDs). High quality Ta$_2$O$\sub$5/ thin films have been obtained from anodizing method. We fabricated a TFD element using Ta$_2$O$\sub$5/ films which had perfect current-voltage symmetry characteristics. We applied novel process technologies which were postannealed whole TFD element instead of conventional annealing to the fabrication. One-Time Post-Annealing(OPTA) heat treatment process was introduced to reduce the asymmetry and shift of the I-V characteristics, respectively. OPTA means that the whole layers of lower metal, insulator, and upper metal are annealed at one time. Futhermore, in this paper, we discussed the effects of top-electrode metals and annealing conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1215-1217
• /
• 2005

One of the important problems in recent AC-PDP technology is the image sticking. In this research, we have investigated the PDP cell with constraint deposition MgO on phosphor, the electrical and optical properties in the PDP cell were examined. Also, we have investigated the correlation with image sticking and degraded MgO protective layer, phosphor in AC-PDP. As a result, we measured the secondary electron emission coefficient ${\gamma}$, discharge characteristics and Brightness for the constraint degraded phosphor are compared with those of nondegraded phosphor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.08a
• /
• pp.220-220
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.02a
• /
• pp.141-141
• /
• 2004

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.4
• /
• pp.142-145
• /
• 2001

The residual DC phenomena in the in-plane switching(IPS)-liquid crystal display(LCD) by the voltage-transmittance (V-T) and capacitance-voltage (C-V) hysteresis method on rubbed polyimide (PI) surfaces were studied. We found that the residual DC voltage in the IPS-LCD was decreasing with the increasing concentration of cyano LCs. The residual DC voltage of the IPS-LCD can be improved by the high polarity of cyano LCs.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.4
• /
• pp.145-151
• /
• 2011

The purpose of this study is to know some changes of resolution and image if we remove scattered ray using lead plate when doing lumbar lateral projection. Using 3 DR system(2 FD types, 1 CCD type) equipments and 2 film system equipments, we gain the image whether the phantom of abdomen equivalent sticking resolution chart has lead plate or not, whether we do collimation or not. Also, we use ion chamber, measure radiation exposure rate and change to entrance surface dose from it. we gain that images in the greatest condition of taking in clinic. 5 people in this group decoded resolution with our eyes, measured thickness of images and compared them from each equiments. Resolution has difference to size of collimation in DR FD type. Also there is no difference the original image with the new image which we abbreviated mAs. In DR CCD type, resolution didn't have difference whether lead plate is or not and whether we do collimation or not. In film type, existing or nonexisting of lead plate didn't influence on resolution. Lead plate makes the quality of image higher due to reducing scattered ray, it doesn't influence on resolution.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.273-276
• /
• 2001

The origin of image-slicking in metal-insulator-metal type thin-film-diode(TFD) LCDs is the asymmetric current-voltage(I-V) characteristic of TFD element. we developed that MIM-LCDs have reduced-image-sticking and perfect symmetry characteristic. One-Time Post-Annealing (OPTA) heat treatment process was introduced to reduce the asymmetry and shift of the I-V characteristics, respectively. OPTA means that the whole layers of lower metal, insulator, and uuper metal are annealed at one time. The treatment temperatures and fabricated process of TFD element were under foot. Also, this low temperature fabricated process allows the application of plastic substrates.